CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.

Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

We can install and maintain smoke detectors on your residential or commercial premises. For more information, contact the Allround Electricals team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

1.  Invest in a Few Strategically Placed Garden Lights–Do not over light your landscape. Be sure to check the “dark sky”* ordinances in your town so that your landscape lighting design will be within legal limits of illumination.  Try a few garden spread lights to softly highlight flowerbeds, rock gardens and sculpted shrubbery.

2.  Work It Wisely—Put the ultimate control in the palm of your hand. Whether hand-held or on automated timers, outdoor lighting controls are the utmost in energy-saving and convenience to promote safety and security effortlessly and instantly.

3.  Prepare Your Patio for the King of the Grill—Task lighting is often neglected when planning your landscape and outdoor lighting design. While aiming for subtle illumination in most backyard areas, you need shielded, but plentiful focused task light over outdoor cooking stations.  An adjustable spot light installed in a rooftop corner or an attached grill light will help you to see that your chicken is thoroughly cooked and your burgers are not too well-done.

4. Watch Your Step and Provide Shielded Path Lighting —LED path lights and strip lights are available in a variety of colors and sizes to uniquely define and expand the boundaries of your outdoor living space while providing nighttime illumination for safe navigation.

5.  Go for the Life Time Guarantee—Superb new vendors are featuring landscape lighting products guaranteed to withstand the elements and weather naturally overtime without peeling or rusting.  Check out new post lamps from Northeast Lantern–all parts, with the exception of glass, are guaranteed for life!

 Say “Happy Father’s Day!” and bring it on home. Great landscape lighting will truly make his home feel like his castle. 

 Best Landscape Lighting Finds For Summer 

Path Lighting: “Nexus,” new from Hinkley Lighting featuring LED and a Bronze finish; “Dwell”  1547 from Hinkley in a Buckeye Bronze or Hematite finish.

Garden Lights: “Intaglio” Brass Crook Neck 1543 landscape light in Olde Bronze from Kichler Lighting; Tiffany path light in Antique Bronze with Green Faux Tiffany shade (P5271) from Progress Lighting.

Grill and Wall Lights: Barn Lantern from Northeast Lantern available in a choice of unique finishes including: Antique Brass, Dark Antique Brass, Dark Brass and Verdi Gris.

Step and Deck Lighting:  LED-TO24-5 Tape Lights from WAC Lighting, available in Amber, Blue, Green, Red, and White.

 Be sure that your new outdoor lighting purchases are in keeping with the dark-sky outdoor-lighting codes in your community.

*The latest landscape light fixtures are energy efficient and in keeping with new “Dark Sky” regulations.  “Dark Sky” ordinances continue to spread across the country in an effort to reduce light pollution.  Check the latest nighttime light restrictions in your town, to make sure your outdoor and landscape lighting is in keeping with new code laws.  Call your local government’s community planning and zoning office.  Fines for violating dark-sky ordinances may cost up to $100–Consumer Digest Communications, LLC.

The emergence of shielded dark-sky-compliant fixtures makes it easy to update your landscape lighting in keeping with the new laws. In addition to being environmentally friendly, these fixtures reduce glare, and they are affordable and energy saving.