Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.

If you’re searching for a way to control your lighting from anywhere and without flipping a switch, Wi-Fi LED lights are the perfect products. With a Wi-Fi LED Controller Hub, you can control compatible LED bulbs, LED flood lights, and LED strip lights with your Android or iOS-enabled smartphone or tablet. The Milight 3.0 app, along with a Wi-Fi compatible controller when necessary—allows you to power lights on and off, control multiple zones of lights, select from thousands of colors, choose from various single-color and color changing modes, and control brightness and speed.

Wi-Fi compatible flood lights are great for landscape lighting, tree uplighting, architectural wall washing, and other outdoor applications. These LED landscape lights are available in 30- and 50-watt versions and have separate LEDs for either white or colorful illumination. They plug into a standard 3-prong outlet and can be easily connected to a Wi-Fi hub. Connect multiple lights to the hub, and synchronize their color, brightness, or mode with your smartphone or tablet.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc sit amet velit non lectus ullamcorper vestibulum. Morbi semper augue vitae vulputate convallis. Morbi sed ante at leo cursus efficitur. Proin nec ante sed nunc dapibus fringilla eget finibus lorem. Vestibulum nulla urna, efficitur sed sollicitudin at, venenatis quis neque. Nulla imperdiet nibh et ex pulvinar ultricies. Ut arcu tellus, tempor ac mauris id, rhoncus pretium neque. Sed sit amet molestie mi, at maximus lacus. In sit amet risus hendrerit turpis auctor tempor.

Integer justo lectus, tempus ac faucibus in, dignissim et diam. Ut at metus non ante dignissim interdum vitae a sem. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus.

Maecenas finibus rutrum facilisis. Integer porttitor in diam eget iaculis. Nam varius tortor vel diam aliquet consequat. Suspendisse at volutpat neque.

Vestibulum egestas lectus quis justo pulvinar blandit. Cras sit amet mattis ligula. Quisque convallis hendrerit felis, et vehicula lorem auctor eu. Fusce fermentum lacinia erat, ut iaculis sem sollicitudin at. Curabitur convallis, ipsum at viverra placerat, odio lacus commodo erat, sed tincidunt mauris massa sed mauris. Pellentesque orci urna, venenatis eget velit sit amet, blandit accumsan neque. Curabitur ultrices dui quis faucibus interdum.

On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.