This summer is already heating up and it is time to make the best of the warm weather. It is an excellent time to enjoy the outdoors while relaxing alone and with friends. Sitting on your patio is nice, but imagine sitting on your patio in a tub of hot, bubbling water. A hot tub is a luxurious way to unwind after a long, hot day at work. Sitting on your patio in a hot tub and watching the sun go downs is a little slice of heaven, right here on earth. If you are ready have your own hot tub installed, you will need to contact your local Burbank electrician. You can count on the team at The Electric Connection to help you get your new hot tub up and running.

You will want to visit your local hot tub dealership to pick out the perfect one for you. There are various sizes and styles out there. Once you have decided on the hot tub, it is time to call an electrician. Burbank residents will need to determine where the hot tub will be placed. There are a few things you will need to consider before you schedule your installation. Because your new hot tub will need electricity to operate, you will want it somewhat close to your home to avoid the electrician having to dig a long trench through your yard.

Once you have determined where to place the hot tub, it is time to schedule delivery. An electrician will hardwire the hot tub to your home. You will need a new breaker installed to support the 240-volt outlet required to run the hot tub. Depending on the status of your current electric panel, you may need an electric panel upgrade. Your electrician will do a quick inspection and let you know what is needed. Give The Electric Connection a call today and schedule your hot tub installation.

Although any light will help alleviate the strain on your eyes while looking at a screen, there is a right and wrong type and location for the light to have the best effect. As mentioned earlier, bias lighting is placed behind your screen to establish a brighter field of view so that your eyes aren’t constantly trying to find a balance between light and dark. Bias lighting illuminates a room without creating glare or reflections on your screen, shining directly in your eyes, or affecting how you see contrast and colors. Other sources of light, such as ceiling lights or lamps, can do all of the above.

If light is shining onto your screen, there’s going to be a noticeable difference in how the picture appears. Colors won’t be as vivid, and the screen might be hazy. In an attempt to remedy the situation, you could adjust the brightness and contrast. However, these adjustments will decrease the life span of the bulb or LEDs in your screen. The adjustments will also result in increased energy consumption along with a higher electric bill.

Adding light behind your screen instead of in front of it will eliminate any color or contrast issues. Dark scenes or colors will look richer against a white illuminated background. The picture below demonstrates how dark colors are lost against a dark background.

howtogeek.com, “. . .  you want a bulb temperature that is as close as possible (if not identical) to the reference point used in the industry that both manufactures the screens you’re looking at as well as creates content for said screens and that’s 6500K.” He goes on to say that, “The bulbs (be they CFL or LED) inside your HDTV or monitor are calibrated to 6500K, the film and digital video shot is color corrected to have a 6500K white reference point, and the editing suites where content is edited and worked on have 6500K bias light.”

So what exactly does 6500K mean? Correlated color temperature (CRI). CRI refers to how accurately a light source reveals the true colors of objects, people, and surroundings and involves a distinct testing method with comparisons to incandescent light or daylight. A light source with a CRI close to 100 shows colors very similarly to how daylight or incandescent light shows those same colors. To get the best picture, you’ll want bias lighting with a CRI as close as possible to 100.

We carry LED strip lights that are great TV backlighting options and will help you achieve the best picture on your screen.

Our variable color temperature controller and remote. The strip also has a CRI of 91, which will show screen colors accurately. This strip can be purchased in 3.28- or 16.4-foot lengths that can be cut and connected where needed with strip light connectors.

Another great option is our 6500K LED strip with LC2 connector. It has a CRI of 79 and is available in 1.64-, 3.28-, and 16.4-foot lengths. The peel-and-stick strip can be cut and connected where needed with compatible strip light connectors.

A kit in cool white is also available and is a convenient bias lighting solution. It has a 6500K color temperature, 79 CRI, and includes everything needed for installation—power supply, dimmer, remote, connectors, etc.

The strip lights listed above have peel-and-stick adhesive backings and can be cut or ordered in lengths to fit every screen size; strips are marked with designated cut lines. If you don’t order a kit, you will need a power supply and can purchase a controller with remote for dimming.

An easy installation method is to use a continuous length of strip around the back of your screen. For a cleaner look, you can cut the strips at all four corners of your screen. If you plan on cutting your LED strip lights, you will need 4 connectors (already included with the kit). All compatible installation supplies will be listed under the accessories tab on each product page. The following instructions explain how to install LED strip lights by cutting them into sections. Note that installation methods will differ depending on the strip you choose.

1. Cut your LED strip lights into lengths that fit the back of your screen. Because we offer different lengths, you might be able to order separate strips that will fit all four sides of your screen.

Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?

During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.

 Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

 Electric Man: Emergency Electrician to the Rescue

Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Electric Man’s emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today at 972-792-7270 to learn more about our emergency electrician services. You can also connect with us on any of our social networks!

About 80% of dwellings were built before the year 1990. While they may have complied with the safety standards at the time of construction, those standards might not be relevant in today’s day and age. Significant changes were made in electrical standards since 1990 and the protection technologies of today were not available or required back then. You must ensure that the standards maintained in such existing accommodations are raised to the electrical safety levels of the current standards.

Understanding the Risks at Existing Accommodation

Extensive safety studies must be carried out in the existing residential buildings to determine the disparity between the required safety standards and the existing safety standards. If the existing standards fall a little short, you must show an urgency to raise the level of safety of these buildings and bring them up to the current standards.

Thankfully, it isn’t too complicated or difficult to do so. You can take small steps to gradually improve the electrical safety through a program of manual safety audits.

3 Ways Current Safety Standards Help in Reducing Electrical Risks

Importance of Verification

The current electrical standards ensure that the new residential electrical installations are safe and that they remain so over their entire lifetime. IEC 60364-6 defines both initial verification of an installation as well as verification of residential dwellings every 10 years. The periodic verification ensures that the fundamental protective measures remain active and reliable.

Recommended Periodic Auditing

There must be periodic auditing to ensure that the safety conditions are up to the mark. The audits need to be simple and based on visual checks. They need to be performed by a qualified auditor, who can then inform the owner of any possible safety issues. The owner will then take responsibility for arranging any necessary repair work. The frequency of inspection can be defined by each country, either by a specific period (e.g., 10 years), or triggered by an event such as the sale or rental of a dwelling.