The costs of lighting changes from year to year. As technology gets better and demand increases, prices drop, effcicieny increases, and everyone is in a win-win situation. With this ever changing landscape comes misinformation, which is why we have put together this post.

This post is going to lay out the true tennis court lighting costs for 2017. On top of that, we are going to go over some tips and things to be on the look out for in regards to choosing the best light fixture for your tennis court that will save you money and produce the best illumination possible.

This post will be broken into two parts; the average costs that are associated with the actual light fixtures themselves and the costs associated with them. Then, the average costs of powering your lights and how to achieve a higher return on investment by being a smart buyer.

Let’s start off with defining what exactly tennis court lighting is, and why it matters.

For starters, tennis court lighting is the application term for high mast lighting. High masts are the other technical terms, there are many that go far beyond the scope of this post. But, we think you should know the definition of lumens as we use it quite often. Technically, a lumen is the SI unit of luminous flux. Although that doesn’t say much, just know that lumens, in simple terms, is the amount of light being emitted by a given fixture. The more lumens, the more light you will have being output.

Now that we have a basic understanding of what tennis court lights actually are, we can get into the real costs of tennis court lights. Hopefully, these costs allow you to be aware of all the options and give you a better understanding on how to go about selecting the proper lighting technology for your court.

The costs associated with your tennis court / retrofit kits are typically much cheaper)

4. Quantity of fixtures needed

5. Your tennis court lux requirements or desires

As with any industry, what brand you buy from and what technology you buy is going to be the biggest cost variable. The most important thing to keep in mind is not only the initial costs of a fixture, but also the costs of running such fixtures over the span of it’s lifetime.

If, for example, you have one light that consumes 1000 watts of light and another that consumes 400 watts but the first one was only $500 and the second one was $1,000, which would you buy all else equal? Well, assuming they both output the same amount of light it actually makese sense to go with the second light, even though it costs twice as much.

Why you ask?

Because the cost to operate the 1000 watt light is more than double that of the 400 watt light, which over the lights lifespan can actually end up costing you much more to run the 1000w light.

These numbers aren’t entirely fictionary either, in fact; they are very close to real life examples we have seen when other tennis courts convert to LED technology from metal halide or HPS. What we haven’t described in the above example though is other cost saving benefits that LED has besides just being more efficient; but we will get to that later.

As for actual costs, they can vary far too greatly for us to list here. It all depends on what lighting technology you choose (think LED, metal halide, etc), which company you buy from, the quantity you need, if you are retrofitting or fully replacing your fixture, and what your lumen output requirements are.

A quick note on retrofitting or replacing in simple terms; retrofitting is typically cheaper for a couple of reasons. Retrofitting in short, is the process of replacing only the luminaire source from your fixture, instead of the entire fixture itself. LED vs metal halide cost to run in our example, the cost analysis can be run between any technologies in the same way. As you will see though after comparing metal halide’s  cost to run vs LED, that LED is far more efficient and costs significantly less to run.

Let’s get into the example:

Let us assume you have 10 lights. Currently, your high masts are metal halide and use 1,000 watts per fixture. Now, let’s assume you are looking for a more efficient technology and you come across LED high mast lights. You find a comparable light which will output the same amount of light (or lumens), but only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 10,000 watts (assuming you have 10 lights) and the LEDs would be using only 4,000 watts if installed. That is 2.5 times less energy being consumed, which can visibility lead to huge savings.

This reduction from 1,000 watts to 400 watts per fixture in the metal halide to LED conversion in exactly why sports field, including tennis courts, are converting to LED.

Extra Tips for Reducing Costs

Conclusion

Hopefully the explainations of where the cost of tennis court lights are in 2017 have been thorough. While it’s impossible to give exact prices for every scenario, we hope this has been a starting point to your tennis courts lighting system.

There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.

At first glance, you might not notice much of a difference between your current electrical meter and your new Smart Meter. But inside, your Smart Meter is hard at work using advanced technology to identify and analyze data about your home’s energy consumption. These meters then communicate this data between your home and BGE via a secured network.

BGE began installing these advanced meters back in 2012, and they’re slated to finish rolling them out to every home and small business in their service area by 2015. Smart Meters can do some pretty amazing things, including:

You may already be used to your home’s existing electrical meter, which keeps an ongoing record of your home’s energy use and must be read by the power company each month so you can be billed appropriately. A Smart Meter, on the other hand, allows for two-way communication between the meter and BGE via a wireless network—a crucial point for building a reliable smart grid.

When you first get your new Smart Meter, you may notice that it seems to function just like your old one, without any of the supposed benefits of installation. This will be true at first, but over time, you’ll be able to experience everything the Smart Meter has to offer.

Best of all, Smart Meters have been thoroughly tested for safety and reliability. These meters are already in use across the country, and they have undergone extensive testing by other utility companies. Smart Meters operate at a level that is much lower (1.4%) than the maximum permissible exposure limits for radio frequency, as defined by the Federal Communications Commission. Smart Meters transmit for an average of about two minutes a day.

BGE will be installing Smart Meters throughout 2014. During that time, every BGE electric customer will receive one for their home. The utility provider will upgrade existing gas meters during this time period as well.

Several weeks before BGE begins installing Smart Meters in your community, you will begin seeing notifications in various forms, including ads in your local paper, materials at your neighborhood library or grocery store and booths at community festivals. A few weeks prior to installation, you will receive a letter in the mail informing you of when your new meter will be installed, or, if your meter is inside your home, providing you with instructions on how to schedule an appointment. For outdoor meters, you do not need to be present for installation. We’ll leave behind a door hanger to confirm that a new meter was installed.

Once your meter is installed, you’ll be granted access to BGE Smart Energy Manager, which will provide you with the tools necessary to better understand how you use your energy, and how to better save energy and reduce your bills.

With the summer months fast approaching, you are likely more than ready to get outside to enjoy the warm summer nights. After a long winter of being cooped up inside, outdoor picnics and get-togethers are just what you need to celebrate the gorgeous weather. To truly enjoy your outdoor space, you need adequate lighting. This is where landscape lighting comes in to play.

There are literally hundreds of options when it comes to lighting up your lawn, garden and patio. If you are keen on a specific theme, you will certainly be able to find a lighting scheme that suits your needs perfectly. If you have toiled long and hard in the flower bed or created a magnificent focal point in your landscaping, you will want to show it off. A strategically placed spotlight or lights that emit soft light are ideal for highlighting those areas you have worked so hard on. This is when you will need an electrician. Los Angeles residents can rely on The Electric Connection to help make their boring nighttime landscape into something absolutely stunning.

Properly placed lights can be used to accent the areas of your yard you want everybody to see and enjoy as well as provide adequate lighting for outdoor parties. However, lighting is not all about appearances. Safety is dramatically enhanced when proper lighting is placed along pathways and in dark corners where things that go bump in the night may be lurking. You want to feel safe in your backyard, and having a well-lit space certainly helps.

Los Angeles electrical needs will require an experienced and qualified electrician to install the lights. In many cases, homeowners prefer to have their landscape lights on a dedicated circuit. This is a job that an electrician will need to complete. Call The Electric Connection today to schedule your landscaping project.