Thinking back to the Big Freeze in February might make you shiver.  Many of Dallas’ residents were stuck indoors for days on end, unable to even get out of their driveways.  But perhaps the worst parts of the early February freeze were the rolling blackouts that some residents suffered.

According to Oncor, the power delivery company in North Texas, 1.3 million residents were affected by these blackouts.  Luminant, the biggest power provider in the state, lost 11 coal and natural gas generators on February 2.  This trickled all the way down to North Texas residents, and even fire stations and police stations were stuck without power.

Losing power during a cold snap can be quite an an inconvenience.  If you’re without power for an extended period of time, you might have to incur extra costs, or even face the danger of driving on icy roads by going out to eat, or even be driven out of your home to a hotel room to stay warm for the night.  In the office, or even at home, a sudden power outage can cause you to lose precious data on your computer as well.  So what can you do to prevent these things from affecting you in the future?  Install an emergency power system.

An uninterruptable power supply (or UPS) provides emergency power to your home in the event of a power outage.  Designed to provide instant backup power, a UPS uses batteries or diesel generators to keep you up and running.  There are a variety of types of uninterruptable power supplies, and a Dallas Electrician can help find the one that will fit your home or office, and can install it safely for you.

So, before you’re left in the dark or cold again, talk to a local electrician in Dallas about the different emergency power systems available for you, and which one will best fit your needs.  They will be able to assess your situation and make sure your power system is safely installed.  Then, the next time North Texas suffers from rolling blackouts, you’ll be able to rest easy knowing your family and home is safe from the heat or cold.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.