If you’re a homeowner, you’re probably looking for ways to save energy and money. There are so many hidden costs involved in home ownership, and if you’re not careful, your electrical consumption can be a big factor in those costs. However, it’s easier than you might think to save on energy if you just follow a few simple tips.

If you’re ready to save energy, ElectricMan wants to help you figure out how to do it! We want to be your go-to source not only for electrical service but also for advice and information on all things electrical. A family owned business, we offer quality electrical services at low prices, and we only employ professional, licensed, certified electricians. We’re here to fix any electrical repairs you may need and if an electrical emergency should happen, we’re available 24 hours a day, 7 days a week! Visit the ElectricMan website to learn more, or connect with our online community on Facebook, Twitter, Pinterest, and Google Plus.

Every year, there are nearly 50,000 home fires caused by poor home electrical safety. Between 2007 and 2011, house fires caused $1.5 billion in property damages and claimed 455 civilian lives. About half of these fires were caused by lighting equipment and outlet failures. The other half of home electrical fires involved major appliances, like washers and dryers, fans, and space heaters.

To keep your property and family protected at all times, follow these important home electrical safety tips from Kolb Electric.

At Kolb Electric, we want our Maryland, Virginia, and Washington, DC customers to exercise home electrical safety. No matter what electrical services you need, rely on Kolb Electric to deliver! Contact us today to schedule an appointment.

Renovations present a two fold risk to exposing families to potentially dangerous chemicals. First, the demolition of what is being replaced during renovations can release dust, mold and other allergy causing particulates in the air. It can also release asbestos fibers. Asbestos can be found in older tile flooring, ceiling and roof materials, exterior siding, covering pipes and pretty much anywhere else since it used to be widely used. It is associated with mesothelioma cancer.

The new materials being installed will put off volatile organic compounds (VOCs) to one degree or another in the form of gases. New furnishings, cabinets, flooring and other renovation products and materials can release gases such as formaldehyde and benzene. The EPA warns of VOC side effects that include coughing, wheezing, sneezing, burning throats and eyes and skin reactions. Exposure is also associated with long-term systemic effects such as liver and kidney disease.

There are different ways to control exposure. One is to choose a contractor with experience in reducing the amount of particulates that get into the air during the demolition phase. If asbestos is known to be present or discovered, a professional asbestos remediation team should remove the materials. There are also contractors who are aware of ways to control exposure to VOCs released by new furnishings and construction materials.

Most people associate that odor of newness that new products have as being a good thing. However, the very presence of the odor is an indication that the product is off-gassing something. The odor may be something that triggers a severe asthma attack in a susceptible person. It may end up causing harm in the long run. The way to know is to become an informed consumer.

Contact each and every manufacturer of every product and material being used in the renovation of the home. Ask questions about risks of having or using the product in the home. It may be a real eye-opener to some people when they find out the answers. Ask the contractor to save every scrap of paper included with the packaging of the new items being installed. Products do come with warnings about VOCs, yet many homeowners never see the warnings.

The state of California is rigid when it comes to warnings about consumer products. However, it is just a warning. People can still choose to install products that put off more VOCs or worse yet, release lead and other toxic and even cancer causing substances. Though no option in new renovations is perfect, there are choices that can be made between product types to reduce the amount of dangerous chemicals and substances released in a home during renovations.

It takes time to do some research before buying that new set of kitchen cabinets or picking that new carpeting for the living room, but it is worth it. With indoor air being the air most families breathe the most of, it makes sense to take precautions to make it as clean and pure as possible for your entire family.

Click here to visit our website.

The weather is starting to get cooler, and as summer rolls into fall, we thought we’d remind everyone of ways they can keep their homes safe from fires!

Check your smoke detectors—you should test your smoke detectors twice a year—once in the spring, once in the fall. In addition, remember that smoke detectors are designed to last 10 years. If yours is older than that, it’s highly recommended that you install a new one. New smoke detector laws that went into effect earlier this year require all new smoke detectors to have 10-year batteries, so you don’t have to worry about replacing the batteries along the way.

Check carbon monoxide (CO) detectors—having a smoke detector isn’t enough anymore; if you want to keep your family totally safe, you need to also install a carbon monoxide detector. Carbon monoxide is an odorless, colorless, and highly toxic gas that can be deadly even in small amounts and can be released by any faulty gas appliance, including furnaces and fireplaces. Your best bet? Install a combination smoke alarm/carbon monoxide alarm for maximum protection.

Inspect your extension cords—with the holidays coming up, you’re going to want to make sure your extension cords are in good shape and not damaged or frayed. Any extension cords you’re planning on using outdoors should be weather-rated. Inside, make sure you use surge protectors and power strips with internal overload protection, and make sure you minimize the amount of adapters plugged into a single outlet.

Be careful with space heaters—space heaters are convenient, but can be a major fire hazard if you’re not careful with them. Make sure there is nothing flammable within three feet of the space heater, and never plug it into an extension cord.

Protect your outdoor electrical systems—any outdoor electrical outlets should be GFCI outlets and covered by a “bubble cover” to keep the elements out. If your electrical service cable is exposed, make sure it’s not damaged. During the holidays, don’t hang any decorations on or near the cable.

Install arc fault circuit interrupters—these are not required by building codes, but they offer a higher level of protection for your electrical system and are generally highly recommended. Arc fault circuit interrupters (AFCI) are designed to detect an unintended electrical arc and disconnect the power before an electrical fire can start.  They are the safest way to protect a home from the risk of electrical fire.

If you’re at all concerned with your home’s electrical safety this year, don’t take chances—call Kolb Electric! We can upgrade your home’s electrical service in any way you need, from installing smoke detectors and adding outlets to a full-on heavy up. Don’t gamble on fire safety—call Kolb Electric today!

Although any light will help alleviate the strain on your eyes while looking at a screen, there is a right and wrong type and location for the light to have the best effect. As mentioned earlier, bias lighting is placed behind your screen to establish a brighter field of view so that your eyes aren’t constantly trying to find a balance between light and dark. Bias lighting illuminates a room without creating glare or reflections on your screen, shining directly in your eyes, or affecting how you see contrast and colors. Other sources of light, such as ceiling lights or lamps, can do all of the above.

If light is shining onto your screen, there’s going to be a noticeable difference in how the picture appears. Colors won’t be as vivid, and the screen might be hazy. In an attempt to remedy the situation, you could adjust the brightness and contrast. However, these adjustments will decrease the life span of the bulb or LEDs in your screen. The adjustments will also result in increased energy consumption along with a higher electric bill.

Adding light behind your screen instead of in front of it will eliminate any color or contrast issues. Dark scenes or colors will look richer against a white illuminated background. The picture below demonstrates how dark colors are lost against a dark background.

howtogeek.com, “. . .  you want a bulb temperature that is as close as possible (if not identical) to the reference point used in the industry that both manufactures the screens you’re looking at as well as creates content for said screens and that’s 6500K.” He goes on to say that, “The bulbs (be they CFL or LED) inside your HDTV or monitor are calibrated to 6500K, the film and digital video shot is color corrected to have a 6500K white reference point, and the editing suites where content is edited and worked on have 6500K bias light.”

So what exactly does 6500K mean? Correlated color temperature (CRI). CRI refers to how accurately a light source reveals the true colors of objects, people, and surroundings and involves a distinct testing method with comparisons to incandescent light or daylight. A light source with a CRI close to 100 shows colors very similarly to how daylight or incandescent light shows those same colors. To get the best picture, you’ll want bias lighting with a CRI as close as possible to 100.

We carry LED strip lights that are great TV backlighting options and will help you achieve the best picture on your screen.

Our variable color temperature controller and remote. The strip also has a CRI of 91, which will show screen colors accurately. This strip can be purchased in 3.28- or 16.4-foot lengths that can be cut and connected where needed with strip light connectors.

Another great option is our 6500K LED strip with LC2 connector. It has a CRI of 79 and is available in 1.64-, 3.28-, and 16.4-foot lengths. The peel-and-stick strip can be cut and connected where needed with compatible strip light connectors.

A kit in cool white is also available and is a convenient bias lighting solution. It has a 6500K color temperature, 79 CRI, and includes everything needed for installation—power supply, dimmer, remote, connectors, etc.

The strip lights listed above have peel-and-stick adhesive backings and can be cut or ordered in lengths to fit every screen size; strips are marked with designated cut lines. If you don’t order a kit, you will need a power supply and can purchase a controller with remote for dimming.

An easy installation method is to use a continuous length of strip around the back of your screen. For a cleaner look, you can cut the strips at all four corners of your screen. If you plan on cutting your LED strip lights, you will need 4 connectors (already included with the kit). All compatible installation supplies will be listed under the accessories tab on each product page. The following instructions explain how to install LED strip lights by cutting them into sections. Note that installation methods will differ depending on the strip you choose.

1. Cut your LED strip lights into lengths that fit the back of your screen. Because we offer different lengths, you might be able to order separate strips that will fit all four sides of your screen.