When you are using an electronic device and need to charge it, you look for the closest power point to plug it in. There are times when you just can”t find a plug point within easy reach; that’s when you look for an electrical extension cord and plug in the device you need to charge.

This is something most of us do as a matter of routine and we don’t give much thought to it. Extension cords are undoubtedly a very handy tool that solves some very basic charging problems. When there is a shortage of outlets or if an electronic device is just a little too far from the closest electrical point, these extension cords prove very useful.

However, it’s important to keep in view the fact that an extension cord isn’t meant to be a permanent electrical fixture; it’s to be used for a specific reason and it can be hazardous to use them incorrectly.

Here, we talk about the different hazards of electrical extension cords and how they can be avoided:

Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

An electrician is someone who is able to fix and install electrical components, while an electrical contractor is a company or individual that employs a team of electricians to take on a variety of electrical tasks. These groups of tradesmen are responsible for performing all types of electrical work, including installing, removing and repairing electrical wiring. For a new construction electrical job, an electrical contractor will review the building’s blueprint, put together a basic plan for its electrical system and place a bid for the project.

In general, each electrical contractor will specialize in one or more types of electrical work. Each different electrical specialty has its own rules, regulations and techniques that an electrician in Burbank must follow. Here are some common specialties for electrical contractors:

Electrician Contractor

Electrician contractors do electrical work on residential and commercial properties. This includes installing fixtures, switches and outlets, electrical service installation and upgrades and other common electrical tasks. These contractors must pass a special certification test and meet state licensure requirements. Each electrician reports to and works in conjunction with an electrical contractor who will inspect and certify the work that they do.

Low Voltage Contractor

A low voltage contractor does electric work less than 600 VAC. This includes alarm installers, computer network engineers and alarm installers who deal with telephone, computer use and other nominal voltage systems.

Outside Plant Contractor

Outside plant electrical contractors are responsible for maintaining and installing the high voltage transmission lines that run between electric company facilities. This type of electrical contractor must not only be licensed, but also heavily trained in this specialized type of wiring. Because of the dangerous nature of this type of electrical work, only highly specialized and experienced contractors may participate in this type of electrical work.

While many electrical contractors specialize in a particular type of work, there are many who have compiled teams that can tackle a very wide variety of tasks. For your next project, don’t hesitate to give us a call or visit The Electric Connection website.