Ground fault circuit interrupters (GFCIs) are common in many homes today. In fact, new homes are required to use GFCIs in certain areas like bathrooms, kitchens, garages, outdoor areas, and unfinished basements. This is because GFCIs provide a level of protection from electrical shock from things like water, which can cause serious injury or even death.

However, GFCIs do need to be reset from time to time. They are designed to shut off if they detect current flowing through an unintended path. If this happens, the GFCI will interrupt the electrical current, which will depower any devices plugged into it and possibly cause power outages at other outlets on the same circuit.

When this happens, many homeowners call us for GFCI resetting help. But you may be able to fix the issue yourself. Here is what you can try before calling the GFCI experts in Arvada.

Tips to Reset a GFCI

A GFCI can be reset without any technical know-how. There are two rectangular buttons on the face of a GFCI, which are usually One is the “TEST” button, and the other is the “RESET” button. Some GFCIs also have an LED light that may illuminate when the GFCI  trips . When the TEST button is pressed, the RESET button will pop out if it isn’t already. To reset the GFCI, simply push and hold the RESET button until it latches.

GFCI Experts in Arvada

If the GFCI will not reset using the above procedure, you’ll want to call an electrician. There could be a problem with the outlet itself or the wiring in the circuit. There could also be an issue at the breaker box or somewhere else along the line. When working correctly, your GFCIs should be reset without much issue, so, if they aren’t, there may be something else causing the problem.

As a top Dallas Electrician we know that your family’s safety is one of the most important things on your mind throughout the day, so we decided that now would be a good time to re-visit the subject of Smoke Detector Replacement and maintenance. As the weather is cooling off, and we are coming into the holiday season, when heaters, cooking, and decorations can bring more potential safety hazards into your home, it is very important that you are certain your family is protected in the unfortunate event that you experience a house fire. According to the U.S. Fire Administration, “Each year fires occurring during the holiday season claim the lives of over 400 people, injure 1,650 more, and cause over $990 million in damage.” Remember these lucky 7 tips to keep your family safe this holiday season by ensuring that smoke detectors are installed correctly in your home, and that they are all in working order.

Smoke Detector Battery Replacement: At least once a year

One of the most important things to remember, if you already have smoke detectors installed in your home, is to replace the batteries at least once a year. An easy way to remember this is to change the batteries in your smoke detectors when you change your clocks for daylight savings time every year. Picking up this helpful habit makes it much easier to remember.

Smoke Detector Replacement: Every 5 to 7 years

Many smoke detector manufacturers recommend replacing the smoke detector unit itself every ten years, but a smoke detector’s reliability will actually decrease after 5 to 7 years. While this may seem like an extra cost, it is certainly a small price to pay for making sure that your family will have the most reliable method of early warning in the event of a fire, providing vital time for everyone to get out safely.

Smoke Detector Cleaning: At least twice a year

Dust, cobwebs, insects, and other airborne particles that make their way into our homes can collect on sensors and contaminate the circuitry inside your smoke detector, causing it to be less effective at sensing smoke. This is one of the most forgotten factors simply because many homeowners aren’t aware of the effects that dirt and dust can have on a smoke detector. Think about how dirty the blades of your ceiling fan would get if you never cleaned them. The same dust that accumulates on your fan blades will accumulate inside your smoke detector. At least twice a year, use your vacuum cleaner wand attachment to carefully remove dust and other contaminants from the inside and outside of your smoke detector.

Smoke Detector Types: Ionization, Photoelectric, or Both

There are two commonly used types of smoke detectors, each with their own advantages and disadvantages. Ionization style smoke detectors are more responsive to quick moving, high flaming fires, while photoelectric smoke detectors are more responsive to smoldering fires that produce more smoke. You can never know what type of fire will happen in your home, so a great option to ensure the best protection is to choose smoke detector units that provide both ionization and photoelectric detection of smoke and fire.

Smoke Detector Location: Key guidelines for safe placement

Smoke detector placement is highly important in order for them to work properly. When installing smoke detectors in your home, it is ideal to have a smoke detector in each room, but at the very least, you should install smoke detectors on every level of your home, and in hallways near each bedroom to increase the likelihood that your family will be able to hear them even while sleeping. Smoke detectors should be placed 6 to 12 inches from the ceiling, and you should avoid installing them near vents, fireplaces, or kitchen appliances to reduce the accumulation of dust, soot, and oily residues from cooking.

Interlinked Smoke Detectors: Whole house warning

Modern smoke detector systems are more than simply individual detectors. It is recommended to install a system that allows all of the smoke detectors in your home to communicate with each other causing all of the detectors to alert of the fire if any single detector senses one. These systems can be wired directly into your homes electrical system, or allow wireless communication between each smoke detector. This has been a major advancement in smoke detector technology, allowing more time for residents to escape if a fire begins in any area of the home. These systems are especially valuable in late-model homes where the master bedroom is often on the opposite side of the house from children’s rooms.

Smoke Detector Testing: At least twice a year

We often take for granted that a smoke detector will simply work as designed once it is installed, but as you can see from this list, there are a lot of factors that go into a reliable smoke detection system. At the very least, make sure that you test your smoke detectors twice a year using the test button that is located on the smoke detector unit itself. When testing interlinked smoke detector systems, be sure to verify that all of the other detectors in your home alert when you test each unit individually. Even if a unit alerts when you test it, if it does not cause the other units in the home to alert, that means that there is an issue with communication between the units, and it should be inspected by a licensed Dallas Electrician.

If you have any concerns about your smoke detector system, or any other electrical projects in your home, the top Dallas Electricians at ElectricMan Inc. will be happy to help. Reach out to us by phone at 972-792-7270 or through the “Contact Us” page on our website at www.ElectricManInc.com, and let our professional electrical technicians ensure your family’s safety by guaranteeing that the job is done right!

Across the U.S. approximately 4,400 people are injured and an additional 400 die each year resulting from electrical hazards annually. Add in electrical fire, and you have what results in an estimated $1.6 billion in property damage each year. Could these accidents have been prevented? When it comes to electrical safety, what you don’t know can hurt you.

GFCI stands for ground fault circuit interrupter. A GFCI is required in any areas with an increased risk of shock due to electrical hazards, such as water. In order to protect you from electrical hazards, a GFCI monitors electrical current, turning off an electrical circuit when it detects an imbalance - current flowing along an unintended path. Think of a GFCI as a small, extra-sensitive circuit breaker built right into an outlet to protect you against electrocution – even in outlets that are not grounded. GFCIs are currently required for use in:

Note: Never use GFCI outlets with refrigerators, freezers, or other appliances, as they could trip without your knowledge.

AFCIs stand for arc-fault circuit interrupters, and they protect you from electrical dangers, but of a different variety – those that create heat via arcing. Examples include a rodent chewing on a wire, driving a nail through a wire, or a device overheating where it is plugged into the wall. AFCIs detect this arcing, shutting down outlets before damage can occur. They are not found in wall receptacles like GFCIs, but instead are easily incorporated into your home or business’ main service panel in the form of specialized circuit breakers. AFCIs are required in:

Though you may have an older home or business where building codes do not require these outlets, proper home safety does. Regular outlets and circuit breakers are designed to protect the house's electrical system, not people. With these devices being so easy and inexpensive to install, why wouldn’t you want to protect yourself and others from the unnecessary electrical hazards overlooking them presents?

As of 2014, the National Electric Code (NEC), the nation’s singular code for safe electrical installation, has added the following standards for the safety of your home or business:

All 125-volt, single-phase, 15- and 20-ampere receptacles installed in a laundry room now require GFCI protection, whether or not a sink is present.

As dishwashers age, the risk of electrical shock increases, thus the latest requirement for GFCI protection on all dishwashers, whether they use a receptacle outlet or are hardwired in.

As of 2014, the NEC has recently added kitchen and laundry areas to the list of areas requiring AFCI protection. This includes all 120-volt, single-phase, 15- and 20-ampere branch circuits supplying not just outlets but also devices found in these rooms.

Shocked by how inadequately prepared for electrical hazards your home or business is? Don’t get burned by ignoring the need for these inexpensive, potentially life-saving devices. Contact Mr. Electric® today.