Explosion proof fixtures are a necessity for environments which output potentially explosive or flammable fumes, produce dust of dirt in the air, or similar situations in which a gas could enter the fixture and cause damage to the light or well-being of the facility.

If you are currently running or working with a facility which requires these explosion proof light fixtures, the list of 3 must-haves below will clear the air and hopefully set you on the right track to ensuring you have the proper setup and design.

First on the list, we are going to talk about the actual technology within the fixture and why it is so important.

While a big part of vapor proof lights is the actual fixture and its design, we think the luminaire within the fixture is equally as important.

We simply can’t recommend any other technology other than LED because we truly believe in it. To give you a little bit of insight on industrial LEDs, here are some of the reasons why companies of all sorts are converting to LED:

As you can see, just from these three main benefits that all sorts of facilities are realizing can really be game changing in terms of savings.

For these reasons (and more), we thought it was a must to have it first on the list.

Interested in learning more? Find Class 1 Div 2. For this reason, we suggest you always inquire with a reputable and knowledgeable company that offers and deals with explosion proof lighting when inquiring about your lighting project.

If you can’t find a reputable company to ask your questions, just LED explosion proofs offer the long-term solution is clear.

Especially when you consider in rebates, your initial upfront investment can be reduced greatly. While these rebates do vary from place to place, they are most often available when you buy DLC qualified fixtures. Not only are DLC qualified fixtures going to make you more eligible for rebates through your utility company, but they also provide other benefits. The biggest benefit of buying DLC qualified lights is they have ben tried and tested and, in most cases, do what they claim. In a busy world of lighting, not all products do exactly what they say. This is most common when a light is not qualified by something like the DLC.

Our main advice is this; to get the best value buy only DLC qualified fixtures. If you don’t, you may actually end up spending more upfront (by not getting any rebates) as well as more energy usage overtime, due to a less efficient build.

Another major cost saver can come through retrofitting. The only time you can retrofit is if your fixture is still functional and can fit a LED retrofit in it. If you do not match these requirements, then a full replacement will (typically) be required.

If you can, we suggest you retrofit. It saves money in two ways: retrofit kits are cheaper than full fixture replacements and the cost to retrofit is typically less time consuming and thus, less expensive.

In Summary

We know that a sensitive environment can be stressful to deal with, especially when it comes to the lighting system and the safety of the facility.

The above 3 must-haves are just the beginning, and each situation can vary greatly. As always, we suggest you consult with some lighting professionals to truly discover what you may require for your facility and operations.

We’ve added linkable linear LED light fixtures to our home, commercial, and industrial product lines. The 5-foot fixtures can be used for anything from parking garage, warehouse, and tunnel lighting to supermarket, workbench, or home garage lighting. These LED fixtures can be easily connected with compatible Super Bright LEDs accessories to create a powerful, energy-efficient light series.

Using no more than 50 watts of power, the 4- and 5-foot linear LED lights emit 5,500 or 6,500 lumens, respectively, of bright natural white illumination. They’re designed to replace 250- or 320-watt fluorescent tube light fixtures but will last five times longer. These LED fixtures illuminate instantly and don’t emit the yellow-green hue that is typical of fluorescent lights.

The weatherproof linkable lights have sturdy aluminum housings and shatterproof polycarbonate lenses. They’re dust tight as well as water and impact resistant. Twenty 5-foot fixtures can be connected in a series, and up to 25 4-foot fixtures can be linked. Mounting brackets are included for wall or ceiling installation, and a suspension kit is also available.

How old is your home or business building? 20 years? 30 years? 40 years or more? When was the last time you had your wiring inspected? If your building is older than 25 years, you could be at risk for an electrical fire. Electrical fires are frequently caused by old components wearing out and failing, but these things can be hard to detect since so much of it is hidden from sight behind your drywall. So how do you know if you are at risk? Here are a few factors that frequently cause fires in older buildings.

From the 1880s until the mid-1930s, knob-and-tube wiring was the standard in running electricity lines through homes and businesses. Today, these systems are not permitted under business code except in extremely rare circumstances. If your home or business has this old system of wiring in it, odds are you should consult an electrician about replacing it with a modern system as soon as possible. Rodents have a thing for chewing on these exposed wires, making them tremendous fire hazards.

Modern appliances and equipment sometimes require a much higher amperage draw to function than old wires are rated to carry. When you overload a wire with too much amperage, it can get extremely hot, which can start fires inside your walls. If your electrical system is old, consider having it inspected by a professional who can tell you whether or not you should upgrade to wire rated for a higher amperage.

Part of being a home or property owner is improving your property. Those who have a knack for handiwork (or at least think they do) may have tried to modify their wiring in the past. This means there could be shoddy connections, loose live wires, and other serious fire hazards hidden behind your walls. Be extremely careful when cutting into drywall in an older home.

Over time, insulation on wires can age, become brittle, and crack. In other cases, the wires may have been chewed by rodents or screwed or nailed into by accident. This can leave the core of your wire exposed, which leaves it prone to sparking and potential fires.

The wires aren’t the only part of your home that’s at risk for starting a fire; old breakers can malfunction and overload if they are not maintained or upgraded every few decades. Have your old circuit breaker inspected by a professional who can test to make sure everything is still functioning properly, as well as replace any breakers that may not be working correctly.

Today’s electrical code is far more advanced and rigorous than it was in decades’ past. With new technology has come new safety standards. However, older buildings were not required to adhere to these new standards, and many of them have not been properly retrofitted with the latest in electrical tech. Odds are, if you have an older building, your electrical system would not pass inspection today. Let a professional take a look and work with you to eliminate the fire hazards and protect your property from a devastating fire.

A significant number of homes in Baltimore and Bethesda, MD, Alexandria, VA, and Washington, DC built between the mid-1960s and the first half of the 1970s have hazardous aluminum wiring rather than copper. During that time, aluminum wiring was considered safe to use and viewed as a cost-saving measure. The U.S. Consumer Product Safety Commission (CPSC) now believes aluminum wiring poses a safety hazard in homes that still have this type of wiring.

The biggest danger associated with aluminum wiring is that unanticipated fire hazards arise from the oxidation and deterioration caused at the points where aluminum wiring is connected at outlets, light fixtures, and splices. While this can cause overheating and arching that won’t trip a circuit breaker, it can cause a fire. Aluminum wiring was used in an estimated 2 million homes between 1965 and 1973—and many of these homes are located in the MD, VA, and DC area.

If you’re concerned about dangerous aluminum wiring, pay attention to the following warning signs:

All of these signs indicate a potential fire hazard for standard aluminum wiring.

Aluminum wiring should be thoroughly evaluated by a qualified electrician who is experienced in inspecting and correcting wiring problems. The CPSC recommends a few methods for correction. The first is to rewire the home with copper wire, an expensive option that really only makes sense if the homeowner is already in the process of completely remodeling or doing deep renovations. The second option is to use the Copalum crimp method to correct the problem. This involves attaching a piece of copper wire to the existing aluminum wire with a specially designed metal sleeve and powered crimping tool. It is a permanent repair option that will eliminate the dangers posed by aluminum wiring. A third option is to use a UL listed copper to aluminum connector to attach a copper wire to the existing aluminum wire.

Only an experienced electrician can accurately determine the level of danger a home with aluminum wiring faces, and then fix the problem in an efficient, timely manner.

If your home has aluminum wiring, we recommend that you call Kolb Electric or contact us online. We will send one of our expert electricians out to evaluate the aluminum wiring in your home to determine the best option to make your home as safe as possible. We’ve been serving Baltimore and Bethesda, MD as well as Alexandria, VA and Washington, DC since 1925. You can count on our experienced electricians to get the job done right the first time.

You will be spending a lot more time indoors over the next few months as we ride out yet another winter. You will want to do what you can to ensure your family is as safe as possible inside your home. There are a few things you can do today to provide an extra layer of safety. Your Beverly Hills electrician is here to help you. You can count on the team at The Electric Connection to provide you with a knowledgeable, experienced electrician to take care of the following safety features for your home.

• Replace your old, standard outlets in the kitchen and bathroom areas with GFCI outlets. These are designed to cut the electricity the second the circuit is interrupted. These outlets are especially handy in areas where water is present, like the kitchen and bathroom. If an appliance is accidentally dropped in water, the breaker will trip, cutting off the electricity and reducing the risk of electric shock.

• Have hard-wired smoke detectors installed. These smoke detectors rely on your home’s main power rather than a battery. Dead or missing batteries in smoke detectors are often to blame for late warnings in the event of a house fire. The detectors are all interconnected so when one goes off, the rest of the alarms are sounded. You will need the installation completed by a professional electrician. Beverly Hills homeowners will feel better knowing the wiring was handled by somebody trained to work with electrical wiring.

• Carbon monoxide detectors are also handy devices that every home should have. If you use natural gas for your heat or have a woodstove, a carbon monoxide detector can warn you to unsafe levels of carbon monoxide in the home.

Your home is somewhere you should feel safe. These rather easy and inexpensive safety features can eliminate some of the risks in your home. Give The Electric Connection a call today and schedule your safety enhancements.