Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

After you’ve been around something for a while, you start to take it for granted.

Things like dissolvable cornstarch packing peanuts.

It took one imaginative 11-year-old boy and an email from a happy customer to remind us just how nifty these little earth-friendly peanuts are.

If you’ve received a shipment from Pegasus Lighting in the past few years, your box most likely had a sticker on it with those words. Inside the box is a note that shares the reasons behind our choice to use biodegradable cornstarch packing peanuts, not the least of which is because they are really fun to play with.

Thank you, Happy Customer, for restoring our packing peanut fascination by sending this great note and photo of your son’s clever art sculpture (whatever you decide that it will be)! Oh, and for the record, I’m voting Rocket Ship.

The controller keeps on monitoring the application requirement in a continuous control loop. It then commands the inverter to produce the required voltage and frequency to meet the application requirements. To do this, the controller, comprised of a microprocessor, takes the input signal from the sensor and compares this with a reference signal. It then generates the appropriate control signal for the inverter to vary its output power.

In a typical application, the controller will monitor process parameters such as pressure, flow rate, temperature or liquid level. For example, an oxygen sensor in a boiler provides a signal to adjust the speed of the fan and control the amount of oxygen in the boiler system.

Today’s drives, using microprocessors, semiconductor power switches, and SMDs are now smaller, compact, cheaper, more reliable and efficient. A typical drive will also include a filter to suppress harmonics generated when converting the DC to AC voltage.

When the detector senses an object across its field of view move, it triggers the lights to turn on. The lights would stay on from 1 to 20 minutes, depending on how you preset the timer. After the preset time, the detector automatically shuts the lights off unless there are further movements within its range.

With energy costs on the rise, deciding whether or not to install solar panels is something that many people have considered. In the right areas, solar panels can provide clean, renewable and eco-friendly energy not only to your home, but also to your entire electrical grid. One of the greatest barriers to their installation, however, is the cost of solar panels. Although they can drastically lower your energy bills, solar panels have a relatively high up front cost. Fortunately for many, there are several different alternatives to purchasing solar panels outright. If this is something that you are interested in, there is sure to be a solution that will work for you. A great resource for solar panel information is solar-panel-info.

Solar Panel Info – How Much do Solar Panels Cost?

Many homeowners are put off by the prospect of sinking a sizeable investment into the purchase and installation of solar panels. While solar energy has been used for many years now, the equipment is still fairly expensive, and installation requires a highly specialized installer. Solar panels can vary in cost depending on the number of panels that you are interested in, and the amount of power that you would like to generate. In addition to purchasing them outright, there are also many other options for buying and installing them. Many solar installers will offer several different financing options, including solar leasing. Whenever you take advantage of a solar leasing program, you typically pay little to no upfront cost. You will sign a contract with the solar installation company to pay a monthly fee to use their equipment. In most cases, this monthly fee, combined with your new lower energy costs are lower than your prior energy bills.

Can I Install Solar Panels on My Home?

There are many different factors that should be considered when making the decision to install solar panels or not. If you live in an area with lots of sun, then you have the opportunity to generate much more electricity than in areas with less sunlight. Furthermore, you can see a greater benefit from solar power if you already have very high energy bills. You will want to make sure that your home is positioned in a way to where any installed solar panels will receive an adequate amount of sunlight. To discuss the viability of solar panels on your home, find solar panel installers in your area to provide you with an assessment. You can do so by going to solar panel info. Their experts can give you a much more accurate assessment on how much energy you can expect to generate, and whether or not the investment makes sense for you.

What Benefits do Solar Panels Offer?

The greatest benefit of solar panel installation is lower electrical bills. If your home is particularly suitable to generating solar energy, this can be a very significant change. In fact, most utility companies will even allow you to sell excess energy back to them whenever you generate more than you use. Many people are unsure of what additional changes to their electrical system are necessary. The only changes that will be made to your electrical system are the solar panels and the equipment that they use to connect to your existing electrical system. None of the components inside your home must be changed. This means that you can continue using all of your electrical devices and appliances just like before. It will just cost you less.

If you are considering solar installation, it is recommended that you research diligently so that you can understand the technology as much as possible. You can typically find many resources for local help, and general information online. One of the best resources for this is Solar Panel Info, and you can visit our website at solar-panel-info.

If you have been on the fence because of price or logistics, take some time to talk with the professionals at solar-panel-info. As mentioned above, you may find that they have a solution that will work perfectly for you. Regardless of the type of installation and financing that you choose, most Americans can save a significant amount on their electric bills while helping the environment when they install solar panels.

Click here to read more.