Choosing the right size depends on the level of energy independence that a renewable energy owner wants. It may simply boil down to what you can afford. These levels range from 100 percent or completely off the grid (the most costly), to a simple energy backup for emergencies.

100% energy independence or completely off the grid: this requires a huge investment in terms of generation and storage. In addition, it may require other power sources such as fossil fuels or wind generators.

High energy independence: This requires a solar system with enough batteries to last a few days or even through the winter. PV systems are sized to enable the owner to have surplus energy to store during summer and be self-sufficient through winter without relying too much on the grid. The customer will still rely on the grid for backup just in case there are prolonged days of bad weather.

Summertime independence: Customer installs just enough panels and storage capacity to get through a normal summer day but will have to draw power from the grid during the winter.

Peak time independence: Battery size should be large enough to supply power during peak times when electricity rates are highest.

Reduced reliance on the grid during peak times: Some customers cannot afford to install enough storage to cover their entire peak time usage. In such a case, some will install a system that will enable them to at least reduce part of their grid usage during these times.

Emergency power backup: This requires smaller energy storage, enough to cover a short power outage. Some customers use this together with fuel generators. Battery storage is only required for the short duration from the time grid power goes out, to when the alternative power becomes available.

Even though a solar energy system is a great investment that reduces your electricity bills, it is not possible to completely get off the grid without investing in large storage systems. However, adding modest battery storage to a grid connected to solar systems is a better way of increasing your independence from the grid without spending too much.

Most marketers have online tools that can help you get the right size battery based on various factors. However, it is advisable to consult professionals for the best advice.

Customers with solar systems are increasingly adding battery storage to reduce their electricity costs or become independent from the grid. With better technology and prices getting lower every day, battery storage is becoming an appealing component to many solar power system owners.

This type of storage allows the customer to charge their batteries during the day and then discharge them when there is no generation. This permits homeowners and businesses to have a backup power source and save on electricity bills. In addition, you can sail through cloudy periods or other times when power generation is low.

Sometimes it can seem that the light switch is connected to your wallet. But you don’t need to live with the lights out to keep your money to yourself. Here are some tips to help you make your lighting more efficient this year.

BC Hydro offers a simple comparison chart of the lighting technology currently available. Because of the wide range of brands and types of bulbs, be sure to do your homework before purchasing new bulbs for your home to make sure they will fit your needs. Energy Star also provides a helpful purchasing guide for when it comes to choose your bulb.

As I’ve said before, I’ve spent years in the electrical business working hard to help people save money and keep safe.  But I’m not really any different from any other American.  At the end of the day, I get to lay down my work for a while and come home to my wife and children, and I want nothing more in all the world than for them to be happy and safe.  For me, that’s one of the places where being a parent and being a Top Garland electrician can come together.  I have the expertise from my trade to do what any parent would want to do; make your home safer for your family.  Which makes this story I’m about to share with you hit me even harder than it would otherwise.  I can’t think of anything worse than something like this befalling the people I love.

Not so long ago, a mother in Texas was bathing her five and six year-old children when disaster struck.  A hair dryer, plugged into an outlet nearby, was accidentally pulled off a nearby counter, and wound up falling into the bathtub.  The current from the hair dryer quickly passed into the bathwater.  Neither child survived.

What makes the story even more tragic is that the deaths of these children could have been prevented with an investment of less than sixty dollars in equipment and labor costs.   Specifically, installing a GFCI or Ground Fault Circuit Interrupter, could have saved the lives of these children. The home the family lived in was an older home, and as a result the circuit in the bathroom wasn’t equipped with this simple yet incredibly important piece of equipment.

A GFCI is designed to quickly interrupt the flow of electric current when it detects that the current is imbalanced, which is a sign that current’s passing through something other than what it’s supposed to, like a person.  This can be a danger when we’re dealing with outlets close to water; the composition and chemical structure of water make it an extremely effective conductor of electric current.  It doesn’t take very much water, either; unplugging an appliance with your hand in a small amount of spilled water on a counter top can cause you to suddenly complete a circuit to the ground, giving you a very nasty shock.

As you might expect, this means that a GFCI should (and by code, must) be installed anywhere there’s a electric device close to water. This isn’t limited to kitchens and bathrooms either; GFCIs should also be installed on outlets located in garages, near any counter top, near pools and hot tubs, and on any external outlets.

We don’t always think of external outlets as needing a GFCI, but they do; remember, any electronic equipment you use outside interacts with the elements.  Using an electric lawn care device, like a weed whacker or electric mower on wet grass can be dangerous, especially if you happen to run over the cord, which could create a circuit between the electricity and the ground through your body.

One of the most common issues I see where GFCIs are lacking, and could be potentially dangerous, lie where there is plenty of water:  your swimming pool.   Older pools, like older homes, may not have a GFCI installed on the pool light located under the surface.  Over time, the seal that keeps water out of the pool light can break down; if and when they do, it can turn your pool from a fun place to spend time to a place to get to get your goose cooked in the blink of an eye.

Although all outlets like the ones listed above must be equipped with GFCIs according to code, this hasn’t always been the case.  Older homes, like the one where those two children were killed, may have been built before these regulations were put in place.  If you have any question whatsoever I strongly recommend that you contact a Top Garland electrician as soon as possible to perform an inspection.

Regardless of whether you’re a burgeoning chef or someone who prefers to keep it simple, you rely on your stove day after day to help you prepare meals for your family or friends. Make sure your home is equipped with the right kind of stove – either gas or electric. If you grew up using only a gas or electric stove, you may be partial to that one. However, it’s important to know the difference between the two so that you can know for sure if you’re missing out on certain qualities you could benefit from.

If you have little ones, you may prefer to use an electric stove, as a gas stove produces visible flames that could harm their tiny hands. On the other hand, if you’re a cooking savant, you may prefer to use a gas stove for its accuracy and versatility. If you’re considering replacing your stove soon, take these factors into consideration.

A stove should last you on average 13 years; therefore, it’s important to invest in one that you will love. After all, you’re going to be stuck with it for quite some time. On average an electric stove will run anywhere from $450 to $2,800, while its gas counterpart will run from $400 to $2,500. The price difference between a gas stove and electric stove is close to negligible. This is why it’s important to take into account the operating costs of each type.

Consider your state’s natural gas cost and compare it to the electricity rate. In most states, natural gas costs less than electricity, which would indicate a lower operating cost.

Before purchasing a new stove, take note of what all you like to cook, as well as how often you cook. An electric stove takes longer to heat up and doesn’t respond as quickly to temperature changes. Further, if you’re a chef, you won’t be able to char, toast, or flambé your food. A gas stove reacts almost instantaneously, allowing for efficiency and accuracy. If you’re the kind of person who prefers take-out then your best option may be an electric stove.