Antique architecture might be beautiful, but the electrical wiring in old houses doesn’t carry the same kind of charm. If you have an older home with an electrical system that hasn’t seen updates in a long time, you could be living in dangerous conditions without realizing it.

There are warning signs that may indicate your wiring is too old, but if you’re ever in doubt, there’s a fool-proof way to get an assessment of your system: Call in a professional! An expert will perform an in-depth inspection of your home’s wiring so you can be aware of the situation and the solutions for it.

With outdated wiring, you may notice strange signs from time to time. Some of them might occur with more regularity than others, but any instances at all can be cause for concern. In general, you’re at risk for having old wiring if your house is 40 years old or more. A few warning signs include:

Although old wiring can raise insurance premiums and keep you from using as many appliances as you’d like, the most important issue is safety. Over the course of time, the insulation surrounding the wires will break down until it eventually leaves the wiring exposed. The insulation protecting older wires doesn’t last as long as it does in newer installations. This means outdated electrical systems are much more likely to feature exposed wiring than those installed more recently.

With inner wiring exposed, the likelihood of short circuits and power failures goes up. Worse, deteriorated insulation translates to a much higher risk of suffering from electrical shocks or having fires break out in your home.

If you have any doubts about the wiring in your house, don’t take unnecessary risks. Ignoring the warning signs of an outdated electrical system can put you and your loved ones in danger. Beyond that, whatever money you might hope to save by not calling a professional would only go into repairs later on.

By Clarissa Allison | March 31st, 2017

Of the Cosmic Leaf by Artemide: “It appears as a digital leaf from another World , embedded with scales like a reptile or an insect which gather light and shadow on its body to seduce a mate.” Materials: chromed steel structure; body lamp-diffuser in transparent methacrylate with texture; painted metal lighting unit.

Contemporary lighting design would not exist today without the heavy influence of lighting movements from the past.  Mid-Century, Art Deco, Bauhaus, and various other instantly recognizable “Mad Men” retro looks still have a profound influence on today’s lighting designs and styles. The infinite array of modern lighting fixtures available for purchase on www.LouieLighting.com will dazzle you and are manufactured by the top brands in the industry! Today’s designers are combining timeless materials like glass and wood with natural metals such as copper, and are also marrying classic structures made of chrome with startlingly unique silhouettes. The clean lines of these straight-forward designs create the ideal focal point in the modern home or business. The result is innovative, functional art that boasts optimal functionality and high style! Read on for 4 of the best contemporary lighting fixture collections, and click the photos to learn more.

Ross Lovegrove, an industrial designer based in the UK, is the man behind Artemide’s Cosmic Collection. He is a  visionary who’s work is “considered to be at the very apex of stimulating a profound change in the physicality of our three dimensional World. There is always embedded a deeply human and resourceful approach in his designs, which project an optimism, and innovative vitality in everything he touches from cameras to cars to trains, aviation and architecture.” View the entire Cosmic line and other amazing Artemide fixtures here.

Watch Ross Lovegrove discuss his approach to design:

Bromi Design is a premier lighting brand that works to bring some of the most innovative designs and energy efficient light sources to any user’s space. Whether you are illuminating a cozy bathroom or a sizeable commercial space, their products that are both functional and uncompromising in their high quality design. Bromi has an inspired approach to furnish and finish a space with a piece of architecture that can elevate the aesthetic of any interior motif!

The Hunza® Border Light Twin Head (shown below) is a 12 volt adjustable outdoor light that projects two wide spreads of soft light filtered through its frosted lenses. This Border Light is one of several similar pole lights created by Hunza. Use it for lighting garden paths or low level planting with a soft wash of light. This fixture is precision engineered and hand assembled in New Zealand.  A transformer or LED driver is required. These fully-adjustable lights boast a 360° rotation and 0-90° elevation.  The fixture itself is made of Marine grade 316L stainless steel, solid natural bronze/copper or aluminium powder coated in several colours!

Since 1988, Ultralights Lighting has been in the business of the design and fabrication of lighting for decorative purposes. The company has aimed to achieve “better design, better materials, better construction, better lights” for its clients. Today, Ultralights’ product line includes more than 200 interior and exterior fixtures like wall sconces, chandeliers, pendants, etc., in varied finish, diffuser and lamp choices. With its mix of traditional, modern and transitional products for commercial, ecclesiastical, retail, hospitality and medical applications, Ultralights Lighting offers customers multiple design possibilities for every conceivable usage.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

A 9-year, $3.8 billion study conducted at The Medical College of Wisconsin in Milwaukee in collaboration with the Institute for Natural Medicine and Prevention at Maharishi University found “a 47 percent reduction in the combination of death, heart attacks, and strokes” in those who practiced transcendental meditation daily. Does pretending to breath in light still sound weird?

I also encountered a study found that “Meditation provides a good starting point for learning and creativity.” The researchers assert that “There are strong pedagogical reasons for including meditation as part of the daily experience of pupils of all ages and abilities.” The study concludes that “Meditation is a proven means for stilling the mind, encouraging mindfulness, and providing optimum conditions for generative thinking and reflection.”

I’m sold. But, you know what? I’m also “sold” that drinking kale juice every morning would be great for me. That doesn’t mean I do it. Meditation, I’m convinced, is GREAT for you and for everyone. I really believe that. But how does one meditate? And when? And what will people think of me if I stare into the dark center of a candle’s flame daily?

For me, the benefits of meditation outweigh any concerns, and using the candle light solved the problem of how to meditate. I think it would be cool to stare at the dark center of a flame for a few minutes per day. Better mood? Increased focus? Better thinking and reflection? Less risk of heart disease? Yes, I think I’ll sign up.

You know, it goes without saying, but light is truly amazing.

Daylight saving time has ended and winter is on its way. That means you're using your household lighting much more often, and if you're still using incandescent light bulbs, it could also mean a noticeable jump in your electrical bills.

But it doesn't have to be that way -- if you're willing to make an investment now, you can actually lower your energy consumption this winter and lock in those savings for years. And it's as simple as changing a light bulb.

LEDs are the most energy efficient light bulbs on the market, and thanks to increased demand and expanded manufacturing, their prices have dropped considerably in recent years. Most LED bulbs now cost less than $10, and smart shoppers can usually find them for less than $5 each.

That price may still seem steep to someone accustomed to buying incandescent bulbs for $1 each, but LEDs are built to last for more than 20 years!

You've Come a Long Way

The affordability of LEDs isn't the only thing that has changed. The array of colors, styles and features has expanded substantially, giving homeowners more choices than ever in the lighting effects they can achieve in their homes.

Colors like "soft white" and "warm white" are popular because they replicate that warm feeling of an incandescent bulb, which is what many consumers missed most when they switched to CFL bulbs. Some bulbs are even capable of displaying multiple colors and can be controlled with a remote.

The most sophisticated LEDs are equipped with smart technology so that they can be controlled from anywhere with a smartphone or tablet. The apps used to control these lights are also some of the most user-friendly interfaces for setting up detailed lighting schedules.

A Few Differences

Picking out LEDs isn't too different from choosing among incandescent bulbs, but there are some other key differences.

An important one is that while LEDs are labeled in watts to offer an idea of their energy consumption, that rating doesn't correlate directly with brightness as with incandescents. LED brightness is measured in lumens, which will range from about 400 to about 2500 in most bulbs. A 100 watt incandescent is equivalent to about 1600 lumens.

It's also important to make careful decisions when choosing LEDs for use with dimmers. If your dimmer is more than a few years old, it's likely to be incompatible with most LEDs, and you'll need to pick out special dimmer-friendly bulbs. You could also replace your dimmers with modern, LED-friendly versions, which allow you to dim any LEDs.

Long sunny days won't be back for a while, so consider replacing those old bulbs with new, long-lasting, energy efficient bulbs this winter. And if you need help redesigning your lighting scheme, reach out to your trusted local electrician.