Spring is notorious for some wild thunderstorms that have been known to knock out the power for several hours and in some cases, several days. When the storm is especially large and the outage is widespread, you are going to struggle to get basic necessities like batteries for the flashlights, canned food and stuff for sandwiches. You are also going to be relegated to cold showers until the power is restored. It paints a pretty grim picture. You can prepare for a power outage and avoid all of the issues caused by not having electricity by having a generator installed by an electrician. Glendale homeowners can rely on The Electric Connection to take care of the installation and answer any questions they may have about standby generators.

Standby generators are an ideal option for anybody who is not keen to go even a few hours without electricity. If you have somebody in the home that relies on electric medical equipment, you work from home or you have small children, having a backup electricity plan is an excellent idea. Standby generators are different from the portable kind and are installed as a permanent fixture to the home by a licensed electrician in Glendale.

The generators are extremely easy to use and don’t require you to do anything but add fuel from time to time. A switch will be installed by a Glendale electrician that automatically turns the generator on when the power goes out. You won’t have to run extension cords or deal with difficult to start engines. You will need to determine how much power your home needs to stay functioning so you can purchase the right generator. If you are not sure, you can always give the team at The Electric Connection a call to learn more about standby generators and how they can help you ride out a storm.

When it comes to step lights, there are several light sources to consider. infographic you can use to brush up your light bulb identification and selection skills. If you want to see how LED compares to other common light sources, use the infographic as you choose your step lights. Knowing what light source you prefer will make your decision easier.

2. Type of Installation

If you’re experiencing shocks when you pull a plug out of the wall, or if you notice a spark when turning a particular electrical switch on and off, a faulty appliance or bad wiring may be to blame. Be careful to make the distinction, however, between an electrical issue and a shock that might occur after, say, crossing a carpet. The latter is caused by static and is not a serious issue.

Flickering lights are irritating, but they aren’t always cause for concern. They may just be flickering because of a faulty or loose bulb, so try swapping out the bulb in a flickering light before calling in a professional. If that doesn’t work, the wiring in your circuit breaker may need to be reworked, or there may be an issue with the connections in your light fixture.

If a bad burn-like odor emanates from the outlets and switches in your home, the first step you should take is to turn off the power from the electrical panel. The second step should involve placing a call to your electrician, who can tell you if the problem is with a particular device or a potentially serious wiring issue. Don’t ignore a burn smell – if left unassessed, it could lead to an electrical fire.

While some of these signs don’t always indicate a serious problem, others are cause for concern. When it comes to electricity, it’s always best to err on the side of caution, so if you’re experiencing any of these issues and can’t determine the cause, it is time to make a phone call.

If you are renovating or updating your kitchen, one common kitchen addition you might be interested is a garbage disposal unit. This little unit sits in your sink and allows you to shred food that you would not normally fit down the drain. This can be a handy appliance, however it may introduce the threat of electrocution into the environment, as water and electricity don’t mix well. If you are looking at having a garbage disposal unit installed in your sink, have one installed safely.

The garbage disposal unit is installed into your existing sink pipe. In order to power the unit, you will require a 120-volt GCFI (ground-fault circuit interrupter). This means that you will need an outlet under your sink to plugin into. If one is not available you will need to have it installed. Often, other appliances may already heavily load kitchen circuits, it is important to check the load on that circuit before installing a new electrical outlet. If you are not careful, every time you run your garbage disposal you could cause the breaker to trip and lose power to your toaster, microwave, or refrigerator.

At times disposal units may need maintenance, become clogged, or break down for some other reason. To identify the problem you may need to open up the sink or motor to get to the part that you need access to. Before you begin any work, shut down the circuit that the garbage disposal is on and unplug the unit. This will not only keep your fingers safe from the motor activating unexpectedly, but it will also help you avoid an electrical related accident. If you start to take apart the pipes and water begins leaking there is a big risk of electrical shock. If you are not familiar with the plumbing or electrical work of the garbage disposal, leave it to a professional. You may think it is a simple job, but one mistake can be costly.

Before having a new garbage disposal installed, inspect your sink and pipes for any leaks. If these leaks make contact with exposed electrical wires or outlets there is risk of electrical shock. If you are not familiar with the plumbing or electrical work involved in installing a garbage disposal unit, call an expert. Our licenced electricians can ensure that your kitchen circuit can handle the unit and install a new electrical outlet.

You’re all packed for your trip, and you think you have thought of everything your family will need while away, but it is important to consider how to keep your home protected while you are gone. Taking a few steps to ensure your home safety while away on vacation can lend great peace of mind as you travel and relax on your vacation. Here are a few action items you should consider to prevent break-ins and add to your peace of mind while you are away from home.

If newspapers are piling up on your porch, it is easy to guess that nobody is home. Hold services can often be placed online, so you can have all your mail and papers delivered once you return.

Keeping the lawn trimmed while you are out will keep up the appearance of your home being inhabited and add to your home safety while away on vacation. You can hire a service to take care of cutting the lawn, or maybe you have a friend who can help keep the front yard from looking abandoned. Thieves are lazy, so if it looks like you’re home, they’ll move on.

Use timers to turn your inside lights on at the right times some downstairs some upstairs and to keep the outdoor lights on at night only. It’s a little thing, but having the porch light on all day may be a giveaway that the lights are one but nobody is home.

Of course, a window can be broken, but it is easier for a thief to keep a low profile by opening doors or windows that may be easy targets. Install deadbolts on exterior doors and keep a dowel or good window lock on all windows.

It is a good idea to look at all your faucets indoors and out to make sure they are not leaking. You would not want to come home from vacation to find interior flooding from a sink that should not have been left running.

Having adequate coverage against theft will insure that you can recover your losses should you have a break-in.

By taking a few extra steps before heading off on your travels, you can add to your home safety while away on vacation. Get your home well protected, and take care of safety details now so that you can avoid worries while you are out.