When you hear something a lot, you tend to brush it off. Warnings about changing the batteries in your smoke detector are heard so often, it is easy to push the advice to the bottom of your to do list. When the smoke detector beeps incessantly, it is easier to pull the battery out with the idea you will put a new one in tomorrow. All of these seemingly innocent plans can actually be extremely dangerous. You never know when a fire will break out in your home and often times, it happens when the batteries are out of the smoke detectors. A good option for every home is to have hard-wired smoke detectors installed by a Los Angeles electrician like those at The Electric Connection.

Hard-wired smoke detectors remove the risk of a fire going undetected by a smoke detector without batteries. The smoke detectors are wired directly into the home’s main power by an electrician. Los Angeles homeowners will take comfort in knowing that as long as the power is on, the smoke detectors are functioning. There is a place to batteries in the detectors to act as a backup system should there be a power outage. This ensures the home is always protected, even if somebody borrowed the battery out of the smoke alarm.

You should invest in at least one hard-wired smoke detector on each floor and in the garage of your home. Another benefit to having these devices installed by a Los Angeles electrician is the fact they are all interconnected. When one alarm is sounded, all of the detectors will go off. This means if there is smoke detected in the garage, you will know about it if you are upstairs in your room. These tools can save lives. Give The Electric Connection a call today and schedule your smoke detector installation.

It is the rare person who does not deal with electrical appliances today. Most people watch television, turn the oven on to cook food, or simply pop frozen foods into the microwave. With electricity pouring through virtually every home, everyone should be aware of the following electrical safety precautions:

All of these electrical safety precautions should be remembered by adults working with electrical appliances. If you know someone who isn’t aware of any precaution on this list, send them here to learn. It could save a life!

So when customers ask us how many ‘Watts” do I need to replace an existing light source, we always convert them to lumens.

•  Pay special attention to the lumens per watt of a fixture. IT DOES MATTER. A LED product at 135 lumens/watt will consume far less energy than a LED product producing 97 lumens/watt. Not all LED solutions are the same. (remember, always buy on the lumens you need, never on the watts you think you need.).

•  To calculate lumens per watt, take the total number of lumens a product produces and divide it by the watts it consumes.

For indoor fixtures, figure on:

utility company. You can check if a product is DLC Qualified on the DesignLights Consortium website. DLC has rebates for Commercial LED Lighting and Industrial LED Lighting

•  Rebates with DLC Premium should be higher than rebates with DLC Standard. Your utility company is typically who provides the rebates and sets the rebate amounts.  Check their website.

•  All UL Listed or ETL Listed.

•  Replacing the light parts of an existing fixture with the a Retrofit unit will not void the UL/ETL Listing of the fixture. However, the exception to this rule are explosion proof rated fixtures (ie. Class I Div 2). Never retrofit a certified explosion proof fixture. UL1598C does not cover these types of retrofits.

•  ETL Listing is the same as UL Listing. They perform the same test, and the certification is the same. The only difference is that the company who performs the test.

This is the final post in our four-part series, "The Secret Guide for Super Moms” — tips, tricks and hacks for busy moms who need to know everything that’s happening in their house.

If you believe Pinterest, every home repair or improvement project can be a do-it-yourself job. Apparently, if every blog is to be believed, moms and dads around the country are remodeling bathrooms, rebuilding old houses and refurbishing vintage furniture -- and they do it all the time! And they look great doing it! And they have plenty of time to take lots of photos!

Maybe some people really are able to do it all (and write about it, too). Most of us are too busy and simply don’t have the training to do more than the basics around the house. When it comes to potentially dangerous repairs, a super mom knows that she needs a professional. When the time comes to fix, rewire or repair her home’s electrical needs, she knows she needs an electrician.

Electrical wiring is complicated and can be dangerous -- and it's tough to spot signs you need an electrician. An amateur electrical job may cause poor wire connections, overloaded circuits or faulty grounding. These situations are hazardous to you, your family and your property. While it may be tempting to try saving money by doing it yourself, or trusting your spouse or a friend to help, you're better off spending the money to have the job done right.

Let's take a fairly common scenario: your fuses keep blowing, or your circuit breakers keep tripping. Yes, you can keep replacing the fuses, but do you know whether they're the right type? Screwing in a 20- or 30-amp fuse as a replacement for a 15 is tempting—no electricians needed, right?—but now you've created a fire hazard by overloading your wiring. The smarter move: call a professional, certified electrician to wire a new circuit.

Like fuses, circuit breakers are meant to prevent circuit overload and the risk of fire, but we use much more electricity than people of our parents' or grandparents' generation. As you upgrade and add appliances and gadgets, you may need to upgrade your circuit breaker panels to adequately supply your home with power. Hire an electrician to do the job, not your brother-in-law who swears he did the same kind of work in the navy. The work is extremely complicated and should not be attempted by an amateur.