As a homeowner, you tend to notice electrical issues like flickers, breaker flips and outages. But keeping an eye on your electrical meter is important too! Without the occasional peek, you could find yourself with higher than average bills, or even a completely unexpected shut off.

The certified electricians at Kolb Electric naturally have spent loads of time with electrical meters, and we’ve got plenty of good information to share this week. Follow along to learn about issues that may arise with your meter, what they mean, and whether or not they indicate a faulty electric meter.

Hard to find a problem if you can’t find the meter, right? Electric meters are most commonly located on an outer wall; usually near where your power line runs. In some homes, particularly older ones, the meter might be found in the basement or a utility closet.

If you live in an apartment, the meter is almost always found near your building (or on it) in a cluster. The cluster houses meters for every unit, and all of them should be clearly labelled with the apartment number on them.

Do be aware that the chances of your meter being outright faulty are fairly low. The machines have exceptionally long lifespans, and are built to endure. It’s more likely you have one of many other electrical concerns, however, it is always best to check with a certified professional electrician if you have any questions or problems. While uncommon, a faulty meter is a pretty big issue, and you don’t want to leave it to chance. Just don’t be surprised if the issue turns out to be something else!

Whether you’re worried about your meter, or you’ve got any number of other electrical problems, the experts at Kolb can help! We provide our consumers with only the absolute best, both in service and skill, and we’re confident in our ability to meet your unique needs. Contact Kolb today to learn more!

Double tapped breakers are a common circuit breaker defect—but they are also one of the easiest electrical problems to correct. 

A double tapped breaker occurs when two conductors are found connected under one circuit breaker lug or when two conductors are connected at the neutral bar under one screw. The problem with a double tapped breaker is that circuit breakers aren’t designed to hold these two conductors together. While they might feel secure and seem to be working fine, these conductors could loosen up leading to arcing, overheating, and safety hazards, including fire.

A double tapped breaker can also occur if your electrical work has been done by someone without correct electrical experience. This can be bad news for your home’s safety and for future building permits!

Sometimes a circuit breaker can be designed for two conductors. In this case, there will usually be a label saying so. However, a double tapped breaker can also be a defect if the breaker isn’t designed to hold two conductors. If there is no label but there are two conductors, there may be an issue with the electrical connection requiring a repair by an experienced electrician.

There are a few ways that double tapped breakers can be corrected; these include the following:

If you have no experience working on an electrical panel, it is a good idea to have a licensed electrical contractor complete the work for you. Playing with electricity without proper experience could be dangerous to yourself and your home!

Kolb Electric has a team of certified electricians who offer a full range of electrical services to home and building owners in Maryland, Northern Virginia, and Washington, DC. We have been working in the DMV area for over 90 years and provide our customers with affordable, quality electrical repairs, whether they have a double tapped breaker in need of correction or any other electrical issue.

Contact us today for a free estimate on your home or office’s electrical work. We offer same day service, 7 days a week!

How to choose LED lamps. The replacement of lamps in an existing lighting system is connected to a lot of doubts when concerning the replacement of the lamp type. Changing the lamp type is a conventional process. The invention of the CFL lamp in the 90’s allowed users to save energy by replacing their energy consuming incandescent lamps. A lot of labels and graphics on the products packages show the replacing types. There are numerous possible influences on a lighting solution. Changing the lamp is changing the most important factor, the lighting quality. Lamps define the light color, color rendering index, luminous flux (light output or brightness) and installed load.

Changing lamps is nothing else than comparing the features of the old system, characteristics like light color, color rendering index and luminous flux should stay the same, suggested the former illumination has been satisfying. Watch the luminous flux (measured in lumen) and compare them to the already installed one and choose an appropriate lamp. Here is an example which luminous flux (lumens are abbreviated by lm) can be replaced by which lamps:

Don’t get confused by all the lighting features from the labels or packages. Concentrate on the characteristics like light color and color rendering index, they should be the same or at least similar. Choose the lamp according to luminous flux in lumens. Be confident when choosing (LED) lamps. They are efficient and offer twice till three times longer service times Metal Halide light sources.