In some of our previous posts, you’ve likely seen our experts mention the presence of “ungrounded” outlets in homes and buildings. But what exactly makes an ungrounded outlet such a negative? Are they dangerous? Our certified electricians come to you today with answers to the real important questions regarding ungrounded outlets!

If you have ungrounded outlets and need an outlet upgrade, contact us today!

Ungrounded outlets are easily identified by simply taking a look at the face of the outlet (where you plug things in). On nearly all modern homes, there should be three holes. Two are the vertical slits, and one roundish one located underneath the pair of vertical ones. That’s a grounded outlet, which have been required by electrical safety standards for all structures since the mid-1960s.

Ungrounded outlets lack the third hole, the roundish one on the lower portion where the, somewhat obviously, ground plug goes.

To understand the why, you kind of have to understand what a grounded outlet does. The two vertical slots represent both a “hot” wire, and a “neutral” wire. The ground wire in a grounded outlet ties into the neutral vertical slot. Why the redundancy? Well, it acts like a failsafe. Should anything go awry with your outlet, such as a short, the renegade electricity simply travels safely along the ground wire back to the panel. Without the ground wire, that electricity can channel into materials, such as fabrics located close to the outlet, or a very unlucky person.

Is it dangerous in that it might jump out and bite you? No. Is it dangerous in that it dramatically increases personal and property risk? Yes, absolutely. Ungrounded outlets increase the chance of:

We’ve encountered a few arguments over the years about the safety of ungrounded outlets. Like how they were used just fine in the past, or how the home that has them hasn’t “burned down yet”, etc. Well, that’s just the thing. Yet.

We haven’t been hit by a car, but that doesn’t mean we should go walking down the center of a busy highway at midnight. Grounded outlets became a standard in electrical code for a reason. They prevent possible problems that homes consistently encountered in the past. It’s all about preparedness and prevention!

So to conclude, are ungrounded outlets dangerous? Yes, they represent a very real potential risk. Worried that you may have ungrounded outlets in your home or business? Contact the certified master electricians at Kolb Electric today! We’ve been bringing our consumers the very best in electrical advice and service for years, and your complete satisfaction and safety are always our top priority!

You’re on top of grounding your children, but are you familiar with grounding your home? It improves the safety of your home as well as increases the life of your electronics, and who doesn’t want that? Mr. Electric has all you need to know in order to have your home properly grounded.

Electricity likes to travel the path of least resistance. When there’s too much of it, it needs somewhere to go. That’s where grounding comes in. You see, without it, that path of least resistance is your appliances and electronics – and possibly you when you use them. Burn! Zap! Not a good thing.

Since you don’t want your appliances – or you – to take the heat in these situations, a grounding wire is added to your home, offering all that electricity the perfect chance of escape, via a wire attached to your home’s electrical system which is submerged firmly in the ground – the reason it’s called “grounding.” Both your home’s electrical box and your home’s outlets need to be connected to this grounding wire in order to be properly and safely grounded.

Without proper grounding, you and your home could suffer burned out electronics and appliances, electrical fires and potentially deadly electrical shock.

Without special testing equipment, it may be difficult to tell. Just because you have three prong outlets does not mean the outlets – or your home – are properly grounded. These outlets must be properly wired in to your home’s main grounding wire for proper protection. There is also more to grounding than sticking a big metal rod in the dirt, such as properly attaching wires, grounding to your home’s water pipes correctly, and much, much more. If you don’t want your electrical behaving badly, you can ensure it is properly grounded by having it inspected by a licensed, qualified electrician.

Newer homes, as a result of increased safety regulations, are typically properly grounded. Older homes, on the other hand, may not have had a proper grounding experience, or any at all. Homes built before 1950 are especially at risk. You should always have your home, regardless of age, inspected for proper grounding by a licensed, qualified electrician to avoid the potential risks of fire, electrical shock, and property damage. You never know what the previous resident did without a permit.

Don’t suffer the punishment of burnt out electronics or a burned down home. Mr. Electric® will keep you out of trouble – get grounded today!