If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.

When you see your kid crawling or walking for the first time, it’s monumental. This is something you simply do not want to miss. But as you’re trying to get a snapshot of this wonderful moment, a thought pops into your head: My child can now go anywhere in this home. You now begin to see your home differently. All of a sudden it feels like a danger zone. The loose wires over there. The dangling electrical cords right here. The numerous empty electrical sockets that appear so inviting to tiny hands.  Before you panic, though, let us put you at ease! Follow these simple tips for childproofing your home!

LED Technology is not just about efficiency, power and light color temperature. Luminous flux performance over lifetime and color rendering index, accordingly the spectrum, are important as well. A lot of people recognize cheap LED versions in any shops or retail stores that seem to be bluish and illuminate the space quite palely.

The manufacturing process is accompanied by variations in material and action itself. The results are white light LEDs with different characteristics. Binning systems have been introduced to support the performance of LEDs and LED products. Binning is focusing on LEDs chromaticity (light color) or luminous flux (brightness) and can be described as the grouping of the LEDs into samples with the same or closest light color or brightness.

LED Light Color – Binning System.

In a nutshell, recent studies tested different compositions of lighting spectra and found an influence on human condition. People who are sensitive to their surroundings tend to complain about headache, dizziness and even nausea when exposed to imbalanced spectra. Long term exposition is even expected to have a negative impact on human health. When buying LED light sources, retrofit kits and products have a look at the CRI or spectrum. The more balanced, the better for the people working under it.

Cities like Colorado Springs, Denver, and Pueblo are constantly expanding and urbanizing—you can always spot a new neighborhood development on your commute to work. New homes are sprouting up all the time, and people are buying. However, sometimes new isn’t always better (or cheaper). There are a lot of great, older homes throughout Colorado cities, and are often a better choice when it comes to real-estate investments. If you currently own an older home, or you are considering purchasing an older home, you’re going to want to check for these common electrical problems that could cause issues in the future in terms of both safety and money.

Generally, homes that were built after 1940 are in the clear—they are usually safe and the electrical systems were installed up to code. Homes built prior to the 1940s should be evaluated, however, as many of the electrical wiring could have deteriorated or may not be able to power a home in this era of modern day technology and appliances. Regardless of when your home was built, it might be a good idea to have an electrician come out and evaluate the wiring systems in your home and ensure that your family will be safe. Here are some things that you can look for yourself when it comes to old wiring in old homes:

Old Cables

Metal cased, fabric covered, or frayed wires are signs that your wiring is outdated and unsafe. Many times during the early 1900s, electrical wiring was “protected” by metal jackets or canvas-like cloth, which can cause problems if the insulation in your walls has been damaged or aged, or even if the metal electrical cords were placed on inadequate grounding. If the wires get exposed, or start to fray in these two locations (next to insulation or on top of a poor electrical foundation) this could be a serious fire hazard waiting to happen. You know you need to call an electrician and get your wiring replaced when you can see any scorch marks on switches or outlets, when you see torn, damaged, or missing insulation, or when you see exposed wires that could potentially cause a fire.

ZINSCO and FPE Panels

Zinsco Panels

While popular around the 1970s, Zinsco panels are almost obsolete today. However, older homes can still have these panels as a part of their home’s electrical system. Not every Zinsco panel needs to get replaced, but it would still be a good idea to get it inspected, as these panels have circuit breakers that have been known to melt into the main bus bar and cause a fire.

FPE Panels

Federal Pacific Electric panels were distributed throughout thousands of homes in the 1950s to the 1980s, and have an unfortunate reputation of being extremely hazardous to the safety of you and your home. These panels have been known for their inability to trip the circuit breaker when the circuit is overloaded or short. When the breaker doesn’t trip, it instantly puts your home at a fire risk because the circuit is taking on much more than it can handle and has no way to shut itself off.

If you recognize either two of these logos on your electric panels in your home, call an electrician immediately to get them inspected.

Old Fuse Boxes—Below 100 Amps of Power

Houses built before the late 1940s and early 1950s were not expected to handle the amount of electricity that we use in modern time. That being said, the homes were installed with a circuit box that can only power 60 amp service (four fuses), or sometimes even 30 amp service (two fuses). This means that your older home may not be able to power all of the appliances and electronics that you have in your house. If your breaker is tripping constantly, or your electric bill is through the roof, this may be a sign that your older home needs an electrical inspection to update the amp-service. Older electrical panels are also at risk of starting a fire. If you are unsure whether or not your home is experiencing this, call an electrician to be safe, and they will be able to give their expert opinion on whether or not you need to upgrade your electrical panel in your older house.

These are just a few signals of outdated electrical work in an older home, but each one is a serious risk to the safety of you and your family. If you have an older house, be sure to get it checked out and evaluated for safety. The same goes for those who are looking to buy an older home in the Colorado area, as the electrical work could be outdated and dangerous.

Your business’ lighting is critical to its success, and with commercial lighting rapidly changing, you could be light years behind the times. Don’t let your business be left in the dark. Take advantage of the perks of modern lighting!

Buildings constructed just 20 years ago harbor energy-hogging lighting systems in dire need of replacement.  Consider computers built in the 80s and 90s versus today’s models, and that will give you an inkling of how far behind the times your lighting systems are - and you’re not alone. According to the DOE, more than 75 percent of buildings are over 20 years old, collectively wasting more than $50 billion annually by holding on to antiquated lighting systems.

Depending on your business type, 20-50 percent of your electricity budget is sucked up by lighting demands. This means energy-saving improvements could really help manage costs. In fact, with continually improving bulbs, fixtures, and controls, lighting typically provides the highest return on investment among major upgrades. The right combination could pay for itself in three to five years, and save you 25-50 percent annually on lighting energy. How much could you save?

Talk to your Mr. Electric® professional to learn more about benefits and incentives available in your region, including:

The experts at Mr. Electric can help you get things all figured out, from the best lighting options for your business to cost. Our experts have what it takes to assess your current lighting system and needs, damaged/outdated/mismatched systems, inefficiencies in energy use, necessary light levels and color, under-lit areas, and more, to find lighting solutions perfectly matched to your needs – and your budget!

Have a bright idea about your business’ lighting? Contact Mr. Electric today.