In case there is a flash flood or storm in your area or if there is a severe plumbing leak or pipe burst, that can result in flooding of water in different areas of your home. Water can cause a lot of damage to the installations and features on your property, and you would have to start the clean-up and repairs without delay. This is also when you start evaluating what can be salvaged and what would have to be replaced – and this includes your home’s wiring.

The wiring inside the walls can become dysfunctional and dangerous if it’s exposed to or submerged in water. If there is a severe flood, it becomes important to completely replace the wiring in your home. Not too many builders actually use wiring that’s rated for water exposure of this kind. Of course, not much can be done till the time all the flood water recedes and all the water has been cleared out from your home.

Even when all the water is pumped out from the indoor spaces, it’s best to shut down the electricity supply at the circuit box mains before continuing with anything. Call in your local electrician to test the wiring in your home. Even if it is still in a working condition, it’s never a good idea to use it.

The insulation can get degraded and that can raise the chances of an electrical fire in the future. In addition, when there are traces of moisture in the wiring, that leads to mould & mildew growth and the metal parts in the system can corrode. This is especially the case when the property has become flooded with salty water.

When it comes to rewiring jobs, you also have to factor in the cost of opening up the wall panels and fixing them. In instances of a flood, the walls are generally torn down right up to the framework. If you take this opportunity to upgrade the wiring in your home, you can save a significant amount of money.

Floodwater is never clean and that proves to be an additional hazard to the wiring and other installations in your home. Chemicals, oil, sewage and a number of other contaminants that come with the floodwater work their way into the smallest spaces, and this is why it’s best to just start afresh with the installation. In comparison, if your home’s wiring has been impacted by water from a burst pipe, you might be able to save these features; this is because it may not be fully-submerged in water.

However, it’s never a good idea to test the condition of the wiring yourself and you should call in a skilled and licensed electrician to thoroughly check and evaluate the installation and give their opinion. Regardless of whether the wiring in your home has got impacted by flood water or water from a damaged plumbing installation, it’s important to get it checked without delay. The professionals will provide suitable solutions based on the condition and location of the wiring.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

Come check out our booth at The Iowa Home Show January 15-17 at the Iowa State Fairgrounds! Featuring on Saturday country music artist Matt Snook!  And seminars with Design Star Winner Jennifer Bertrand both Saturday and Sunday!  You will also be able to tour 2 complete homes!  Custom Electrical Services at The Iowa Home Show!  Friday 1-7 , Saturday 10-7 , Sunday 11-4.

Please come out and see all the vendors and stop at the Custom Electrical Services booth.  Custom Electrical Services at the Iowa Home Show will have a variety items on display.  Check out the latest LED options for your home.  Inquire about a whole house backup generator.  Upgrade some electrical devices and more!  Please print the coupon photo and enjoy a complementary buy 1 get 1 free entry coupon!

Of course you will want to check out the Custom Electrical Services booth at The Iowa Home Show, there will also be a large variety of vendors. Ranging from general contractors, remodeling contractors, flooring and tile vendors, countertop vendors and more!  If you coming for ideas, trying to find a contractor, or just looking for something to do.  Please come out and say hi!

The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263