Antique architecture might be beautiful, but the electrical wiring in old houses doesn’t carry the same kind of charm. If you have an older home with an electrical system that hasn’t seen updates in a long time, you could be living in dangerous conditions without realizing it.

There are warning signs that may indicate your wiring is too old, but if you’re ever in doubt, there’s a fool-proof way to get an assessment of your system: Call in a professional! An expert will perform an in-depth inspection of your home’s wiring so you can be aware of the situation and the solutions for it.

With outdated wiring, you may notice strange signs from time to time. Some of them might occur with more regularity than others, but any instances at all can be cause for concern. In general, you’re at risk for having old wiring if your house is 40 years old or more. A few warning signs include:

Although old wiring can raise insurance premiums and keep you from using as many appliances as you’d like, the most important issue is safety. Over the course of time, the insulation surrounding the wires will break down until it eventually leaves the wiring exposed. The insulation protecting older wires doesn’t last as long as it does in newer installations. This means outdated electrical systems are much more likely to feature exposed wiring than those installed more recently.

With inner wiring exposed, the likelihood of short circuits and power failures goes up. Worse, deteriorated insulation translates to a much higher risk of suffering from electrical shocks or having fires break out in your home.

If you have any doubts about the wiring in your house, don’t take unnecessary risks. Ignoring the warning signs of an outdated electrical system can put you and your loved ones in danger. Beyond that, whatever money you might hope to save by not calling a professional would only go into repairs later on.

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

You probably never really think twice about using your toaster or running the vacuum. That is because we are so used to electricity we rarely give it a thought when we use our favorite gadgets and gizmos. However, electricity can still be dangerous. We need to take precautions and teach our children about how to be safe in a world surrounded by electricity. A Los Angeles electrician has some tips for staying safe. You can call The Electric Connection to find out more about staying safe in this electrical world.

One thing you can do to keep your children safe as well as your home is to keep cords out of travel paths. Cords that are stepped on repeatedly will break down over time. This can result in bare wires, which can lead to an electrical spark and even a fire. Not to mention, cords that are strung about also create tripping hazards.

Any cord that looks like it has suffered some abuse or been chewed by animals should never be plugged in. Have the item repaired with a new cord by a certified electrician, or throw the appliance out. It is too risky to try and use.

We all know the dangers of using electricity around water. However, places like the kitchen and bathroom need electricity and water. Accidents happen, but you can add a layer of protection against electrocution by having GFI outlets installed by an electrician. Los Angeles homeowners will feel safer knowing a GFI outlet automatically cuts power to an appliance as soon as the electric current is interrupted. This keeps the electricity from flowing into your body.

These are just a few things you can do with the help of your electrician to keep yourself and your family a little safer. Give The Electric Connection a call today and schedule your appointment to have GFI outlets installed in your home.

You are tired of working at your cubical. You’re dreaming of something bigger. You’re obviously online now and most likely looking for something better. Better is in front of you right now. We are better. No we are not Google, Zappos, or Facebook. We are a local Clive, Iowa, company. And NO we don’t need any money from you. This is a real business and we don’t need you to buy into anything other than our vision. You will be a full time paid team member.

We are not a startup. Our company was founded in 2005. We are financially stable and a leader in our industry. Why the entrepreneur themed vibe? We want to build something better. We want to build something that is truly great. We want to interview 5 leading candidates not 50 bodies.

Benefits:

Discussed at interview but they are well above the industry standard. Hours: 9-5? 8-4? Somewhere around there. We need you here 8 hours per day and it has to be during standard business times. Flexible but simple right?

Does your home suffer from stuffy, stale air? Does it feel like you’re walking through a swamp despite the cool air coming out of your AC? Are you looking for an alternative to portable dehumidifiers? There are numerous benefits to considering a whole house dehumidifier for your Boston, MA home. These systems integrate directly within your ductwork so only those who use a furnace, heat pump or central air unit are eligible. These devices work especially well during the summer, and we advise our customers to consider them whenever applicable. While portable units have their place, they can’t compare.

A whole house dehumidifier allows you to control the humidity levels in your home. Why is this important? Let’s have a look at some of the benefits.