Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?

During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.

 Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

 Electric Man: Emergency Electrician to the Rescue

Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Electric Man’s emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today at 972-792-7270 to learn more about our emergency electrician services. You can also connect with us on any of our social networks!

If your home has a fuse box, it means it has older wiring. This is not automatically a bad thing—the wiring put in was up to code at the time of installation—nor does it mean your home is unsafe. If the fuse box malfunctions, you can choose to have it repaired instead of replaced with an upgrade to a circuit breaker panel.

A fuse box and wiring can wear down over time like anything else in a home. If your house is old enough to have a fuse box, chances are strong that it and the wiring are starting to deteriorate and will begin to malfunction more and more often. You can expect to require a larger number of repairs, and in the long run it isn’t worth it to keep patching up a fuse box and aging circuitry.

An old fuse box will also have trouble keeping pace with growing household energy demands. When the fuse box was first put it, there were lower voltage demands on the circuits in most houses than there are today. Your home likely uses more power than it did only 10 years ago, and the fuse box may not be enough to handle this higher power load.

Finally, fuse boxes are simply less convenient than circuit breaker panels. Instead of replacing fuses when they get blown, you only have to reset the tripped breaker.

Replacing a fuse box with a circuit breaker panel does more than simply tear out one component and put in a new one. The wiring around the panel will probably also need to be replaced with upgraded wiring so that it matches the capacity of the new installation.

Keep that old wiring in mind as well. This might be a good time to schedule a whole-house re-wiring to go along with the circuit breaker. This will bring your home up to current electrical code requirements, offer more efficient power, and lessen issues from outages.

We strongly urge homeowners who still have fuse boxes to make the change to the modern electrical panel.

One of the biggest hazards of your home electrical system is the possibility of an electric shock. Whether there is an accident during an electrician’s work or there is exposed wiring that could shock someone inadvertently, this is a hazard that can cause serious injury and even death. Fortunately, by installing a ground fault circuit interrupter (GFCI), you can help limit the exposure to shock and minimize the danger. Read on to learn more about GFCIs and how they work.

Limit the Danger of Electrocution

Electricity is always trying to find its way to the ground any way it can. Unfortunately, sometimes the most convenient path is through a human body. That's why if you touch a live wire, the current will likely run through you on its path downward. The consequences of electric shocks can include burns, heart arrhythmia, nervous system damage and death. That's why it's essential to protect yourself from shocks around your home, especially if you are using electrical equipment that is likely to contact water.

Ground fault circuit interrupters work by constantly monitoring the amount of current running through a circuit. The instant that the current level returning from the circuit drops below the level going out – which could indicate that the electricity is escaping to the ground, possibly through a human – the GFCI trips and cuts off the power. The device should kick in in as little as 1/40 of a second, potentially saving  you, your family member or your electrician from electrocution.

Where to Install Your GFCI

There are three types of GFCIs available. One is the receptacle type, usually in the form of electric outlets with small black and red switches built in. You can also purchase portable GFCIs to plug into any outlet, and some electricians actually build the GFCI into the home circuit breaker. Any GFCI should have a test button so you can make sure it is working properly before using it – a well-functioning GFCI should trip as soon as you plug in a malfunctioning tool, saving you from even a minor shock.

Ground fault circuit interrupters aren't ideal for every circumstance – very long circuits, permanent motors and fluorescent lights are all prone to tripping the GFCI even when there is no danger. On the other hand, GFCIs can provide crucial protection in the kitchen, bathroom, laundry room and other areas where water could compromise a circuit, and are also useful when using power tools around water.

Protect Your Family from Electric Hazards

It's relatively easy to install outlets that have GFCI protection, and it could end up saving your life. If you are interested in installing ground fault circuit interrupters in your house, contact an expert electrician today.

Let’s face it—halogen and incandescent headlight bulbs are a thing of the past. fanless, driverless LED headlight bulbs were used in this installation.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points. Repeat these tape lines for your other headlight.

6. Remove your headlight assembly if necessary, remove the current bulbs, and install your new LED bulbs. Check your owner’s manual for specific instructions on how to replace your headlight bulbs.

7. Depending on your vehicle, you may have to adjust your headlight beam before or after the assembly has been reinstalled. Your owner’s manual will explain how to adjust the beams. Align each headlight so that the top edge of the beam is at the same height as your horizontal line(s). If your headlights can be adjusted horizontally or produce two light cutoff points, use the vertical tape lines to align them properly.

3. Shake the vehicle to ensure that your suspension system is settled. For more precise adjustments, inflate all tires to their designated psi capacity and have someone sit in the driver’s seat. Also, make sure that your vehicle’s gas tank is at least half full.

4. Measure from the ground to the center of your headlight assembly where the bulb is located. This step must be done for all vehicles. If your vehicle allows for horizontal headlight adjustments in addition to vertical adjustments, it’s important that you also measure the distance between the centers of both headlight bulbs. The vehicle featured in this video allows for vertical headlight adjustments only; therefore, center lines aren’t necessary but are shown for demonstration purposes.

5. Turn on your low-beam headlights. Using painter’s tape, mark your headlight measurements on a flat wall. Measure from the ground up, and apply a horizontal line of tape to the wall; this line represents the top of your headlight beam. You can either apply one long, continuous line or small sections where the brightest areas of the headlight beams are shown.

If your vehicle allows for horizontal adjustments, mark the distance between your headlight centers with two vertical lines of tape. These lines are important for projector headlights and/or lining up beam cutoff points.

Fun Fact: His obsession with a chandelier led Italian astronomer, mathematician and physicist, Galileo to discover the law of pendulum motion.

While, we cannot guarantee that you will understand the laws of physics, we can guarantee that you will be captivated by the brilliance of a chandelier.

More than ever, we are experimenting with home lighting design to display our individuality, and nothing conveys unique style more than a fabulous chandelier.

Professional lighting consultants at Capitol Lighting can help you to illuminate your sense of style and find the perfect chandelier(s) to complete your decorative interior design.  A few simple laws of lighting and trusting your own good taste will get you there…

Chandelier Application and Design Tips from Capitol Lighting

Outstanding Applications:  From powder rooms to dining rooms, the chandelier enhances the appeal of your home environment. Chosen above all else for their aesthetic rewards, chandeliers also provide needed general ambient illumination.

Power in Proportion: To enjoy the full benefits of a chandelier, you must choose a fixture that is the correct size.  A chandelier that is too big will overpower; one that is too small will look out of place.  Finding the right chandelier size is easy:  Add the length and width of the room in feet, and then convert that number to inches (i.e. a room that is 12 feet by 16 feet would require a chandelier that is approximately 28 inches wide). When in doubt between available chandelier sizes, size up to achieve a more balanced presentation.

Special Considerations for Over Dining Tables:  When hanging a chandelier over a dining table, the total chandelier width should be about a foot smaller than the table width to allow approximately a 6-inch clearance for those seated around the table.

The Long and Short of It:  Over a dining table, the bottom of the chandelier should hang about 30 inches over the tabletop. The height of the fixture should measure about three inches for each foot of ceiling height, so for standard 8 foot ceilings choose a chandelier with an approximate height of 24 inches.

In a one-story foyer or in rooms with standard 8-foot ceilings, a chandelier should hang no less than 7 feet from the floor.  In a two-story foyer or in rooms with higher ceilings, the chandelier should hang approximately 8-10 feet from the floor. If your foyer fixture is to be viewed through a picture window, select a chandelier that will fill this space and center the fixture accordingly.  Note:  A two or three-tiered chandelier works best for rooms with higher ceilings.

Installation Awareness:  Be sure to employ a qualified electrician and follow National Electrical codes when installing fixtures.  It is especially important to consider the proper mounting procedures for hanging a heavier chandelier.  Usually fixtures weighing 50 pounds or more must be secured to the home’s permanent structure.

Maintaining the Glamour:  Keeping your chandelier in pristine condition requires proper cleaning and attention to specific instructions pertaining to certain finishes.  Generally, crystal and glass elements are kept clean with a basic soap and water combination.  Nonabrasive cleansers for most finishes are required.  Drying fixture components completely will help protect their luster.

Best Accessories:  Ceiling medallions, chandelier shades, decorative chain and cord covers may add to the ambience of the chandelier.  These items may be special ordered to give your chandelier a unique flair.

Imperative Additions:  Be sure to use the correct bulbs for your chandelier.  Where you have a choice between frosted or clear, choose the bulb that goes best with the fixtures finish.  Always employ dimmer controls with your chandelier.

Get High and Mighty with a Mini: The mini chandelier has become an increasingly popular lighting fixture around the home due to the versatility of its small size. Many designers are opting for mini chandeliers, rather than pendant or island lights, over long dining room tables and kitchen islands. Mini chandeliers are also gracing powder rooms and master bathrooms, as well as bedside tables.

Accent the Positive:  Although the chandelier should be the main lighting attraction, low-voltage spot lights, a matching torchiere floor lamp, +/or coordinating wall sconces make great designing additions to supplement lighting needs and complete the room’s décor.

The lighting experts at Capitol guarantee that you will captivate guests and enjoy your home to the fullest with the most illuminating fashions in home lighting and accessories.  Capitol Lighting’s lighting consultants can help you find the perfect chandelier for your home and give you tips on hanging a chandelier.