Solving electrical problems and doing electrical repairs can be risky things to do if you don’t know exactly what you are doing.  Sometimes it is absolutely necessary to hire a certified electrician to do these things for you so that you don’t put yourself or your property at risk.  Here are some key things you should keep in mind when choosing an electrician.

Certifications: You should always feel free to ask an electrician about their certifications; if they aren’t willing to answer your questions about it, they probably aren’t the right electrician for you.  There are different levels of training that an electrician must go through before earning certifications.  Typically, they start out as an electrician apprentice working under the direct supervision of a journeyman and the general supervision of a master electrician.  A master electrician has the highest level of certification and more experience than an apprentice or a journeyman.

References: A good electrician should always be able to give you references if you ask for them.  Any hesitation in this area is not a good sign.  It is a good idea to check with the references that the electrician gives you before hiring them.

Insurance: It is very important to hire an electrician that carries the proper insurance.  Without proper insurance, you could be responsible for any damages they happen to cause, such as an electrical fire or other accidents. Did you know that electricians are only required to have $300,000 worth of coverage? Be sure to confirm that you are hiring an insured electrician.

Communication: It is also important for the electrician you hire to have great communication skills.  They should be friendly, courteous, interested in your problem, and listen to your concerns.  They should also be upfront about costs and give you an estimate of how long the project should take.

Keep all of these things in mind as you seek out someone for electrical consulting.  For Dallas electrical repairs, www.ElectricManInc.com offers 27 years of industry experience, and they are open 24 hours a day.  They have a master electrician on staff, they are properly insured, and they offer free estimates.

About ElectricMan Inc.

ElectricMan Inc. is one of Dallas’ most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com

The short answer to this question is no one can be certain of the reason without a professional inspection. If you notice sparking or electrical arcing in any appliance, electrical outlet, or switch, you should call a qualified professional electrician immediately. Bryant Electric Service can dispatch a licensed electrician capable and experienced to make these inspections.

Please call Bryant Electric Service at at 512-402-8587 with any concerns you have about sparking or electrical arcing of any kind.

If you need to add more light to the dark corners of your home—whether they are inside or outside—an electrician who specializes in custom lighting projects might be exactly what you need. The projects done by a licensed electrician can be customized to include all types of home lighting, including interior lighting, recessed lighting, landscape lighting as well as security lighting.

Your first step is deciding what style of lighting fixtures you’ll want to add to the interior or exterior of your home. Along with functionality, remember to choose lighting fixtures that complement the style of your home decor.

Once you’ve made the decision on what style of lighting fixtures you want, there’s one more step before finding the right electrician in Los Angeles.  That step is to purchase the lighting fixtures that you want to have installed. Now that you’ve made all of the decisions, it’s time to find the right electrician. Los Angeles residents and business know that they can count on The Electric Connection as a reliable and professional electrical contracting company that’s been in business for over 30 years.

We’ll be able to quickly install your new interior lighting or outdoor lights for you.  We’ll even rewire your entire home for you if necessary and bring your old wiring up to the current code requirements. We have years of experience when it comes to wiring installations as well as any other types of electrical services you might need such as new outlets, ceiling or bath fans, panel upgrades and more.

We’re fully licensed, bonded and insured electricians, and we’ll do it right the first time. Come visit us at: www.theelectricconnection.com today and see what we can do for you!

A lot of serious contractor related problems can be averted by doing just a little research. After nineteen years in the trade, I have found that if both home and business owners follow these tips, they almost always have a pleasant experience:

1. Check the license. Never hire an unlicensed contractor or electrician in any capacity. It may look like a good deal, but it may end up costing you more than extra money in the end. Unlicensed contractors are not bonded and have not taken any kind of exam to be assured they have the knowledge to perform the type of work you may need done. Also, it is very unlikely they have liability insurance (more on that below).

2. Check for insurance coverage. By law, Hawaii licensed electrical contractors will have liability insurance coverage. The bond that is required for electrical contractors in Hawaii is generally $7000 – an extremely limited amount. Look for an insurance policy of at least $1 Million.

3. Ask for a Journeyman card for proof of license. All electricians are required by law to be a journeyman, having passed all Hawaii State requirements. Ask to see the card of anyone performing electrical work on your home or business. This is very important and makes sure you have qualified workers.  Your persons and property are at risk if they are unlicensed.

4. Ask what kind of work the electrician has done in the past. It is usually a pretty good indication of what you should expect in the future.

5. What is the electrician’s real concern as you speak with them about your project? Are they concerned about what you are trying to accomplish on your project? Are they up front and confident about pricing? Do they care about your needs and the needs of your property?

Following these tips will give you the ability to find the right electrician for you. Blue Sky Electric is happy to provide you with more information. Give us a call with any questions and we will be happy to assist you.

CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.