A burnout, in electrical terms, is a drop in voltage across an electricity supply system. It can be spontaneous (unintentional) caused by disturbances in the grid, or intentionally caused during emergencies when the load needs to be reduced in order to prevent blackouts. The lower voltage causes lights to dim, leading to the name “burn out”.

Spontaneous burnouts usually cause voltage to drop for only a short period, while the intentional ones can have effects lasting anywhere from a few minutes to a few hours.

A burnout can prevent some electrical devices from getting harmed by power loads, but others can actually get damaged severely. Here are some facts that you should be aware of:

Electricity is something we use every single day, at home and in our workplace. Commercial and industrial establishments would never be able to function without it, and yet we take it for granted – at least until the time something goes wrong with it. While the electrical fixtures and fittings are all within sight, the wiring and other related installations are typically out of sight. This also means that we don’t really pay much attention to them at all.

What we don’t realise is that while most electrical issues seem like they have arisen out of the blue, there are almost always some warning signs. Electrical issues can result in electrical fires that can be extremely dangerous. Melted wiring is one of the commonest causes of electrical fires. There are a number of things that can lead to melting of electrical wiring, such as:

Electricity anywhere has an electromagnetic field; and the electricity flowing through the wires on your property is that way too. This electromagnetic field is at a certain level and that is why it isn’t really evident. However, at times there is an excessive build-up of electricity in the wiring on your property, which weakens the wires. If you don’t address this issue on time, the wiring will melt and result in arcing, and that is when you hear the crackling, hissing or buzzing sound emanating from wires.

All electrical installations are made to carry a certain amount of power load. Older structures tend to also have decades-old wiring; that is unable to bear the load of current-day, power guzzling electrical appliances and equipment.

If you run too many of these all at once on your property, it results in an overload in the system. Typically when this happens, the fuse connected to that particular circuit blows. If, for some reason, this doesn’t happen and the electricity continues to flow through the system, it will cause the old wiring to melt.

A short circuit is caused when a neutral wire comes in touch with a live wire. Just as in the case of a power overload, if this occurs, the fuse will blow and the electrical supply within that circuit will get disconnected. However, if this doesn’t take place & the electricity keeps flowing through the wires, they will get heated up and melt.

If you find anything out of the ordinary with the electrical installations in your home/commercial establishment, never defer calling in an electrician to check what the issue is. The signs to look out for are arcing in electrical installations, switches and powerpoints that are hot to the touch etc.

Attending to all these issues on time will ensure that you have less problems to deal with, later. Never forget that electrical issues can be very dangerous and the more you defer getting them checked, the more you endanger your safety and that of anyone who lives or works on your property.

The one way to prevent electrical issues from surfacing in this manner, is to opt for preventive electrical maintenance services. As part of these services, the electrician will come in at pre-decided intervals and thoroughly test all the electrical appliances, fixtures, installations and wiring on your premises. If he notices anything out of the ordinary, he will inform you about it and it can be fixed before the issue aggravates and poses a risk to life and property.

We at Allround Electrical are licensed and insured electrical contractors, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

Protecting your homes electronics with whole house surge protection is dramatically more important today then just ten years ago.  Your home becomes more and more filled with electronics and appliances that need protection from power surges.  A lighting storm can wreak havoc on the utility grid and your homes electronics.  A good lighting storm will generate 12-18 calls in one day just for our local business Custom Electrical Services.  Sometimes it even seems you can almost track the storms path as it moves across the Des Moines Metro based on the incoming calls.  Customers who experienced power surges have received thousands of dollars and in some cases tens of thousands of dollars worth of damage from one major power surge.  A surge is most commonly known for taking out electronics such as computers, TV’s and stereo equipment.  But did you know many of your homes appliances now have sophisticated electronics built into them?  We see garage door openers, refrigerators, dishwashers, and even the homes hot water heater, air conditioner and furnace all taken out by power surges.

You should know that nothing will fully protect your home from a direct lighting strike.  However in most cases the damage is caused by the power surge rather than a direct lighting strike.  We are all familiar with the power strips that offer surge protection you can purchase from the big box stores.  Even if you have a whole house surge protection system we still recommend point of use surge protection.  When purchasing surge protection you want to look at the joule rating.  The joule rating is the amount of energy absorption / dissipation a surge protector can handle before the surge protector fails.  The higher the number the better the surge protection device is at protecting the electronics plugged into it.  But what about the items not plugged into the power surge strip?  Well unfortunately anything not plugged into the power surge strip is not getting any protection.  So that $1200 dishwasher, $600 garage door opener, or $4,000 air conditioner is not getting any protection from your point of use power strip.  But don’t worry you now have options.

We have installed hundreds of whole house power protection devices in peoples homes across the Des Moines Metro.  One customer in West Des Moines received frequent issues from power surges.  After we installed a SPD (surge protection device) in each of his electrical panels he has not lost any electronics since.  A whole house surge protection device like a power surge strip is only capable of absorbing or dissipating so much power.  This particular customer received a significant power surge which he said would of normally damaged his very expensive home theater equipment and whole house automation system in the past.  A SPD when properly installed in your electrical panel can protect your entire home from power surges.  Not just electronics plugged directly into a surge protector.

There are several types of whole house surge protectors on the market.  Many are good while others are not.  Even the best whole house surge protectors are not as effect if they are not properly installed.  Manufacture specs are specific when it comes to the required installation so the device can properly perform the way it was engineered.  A good quality whole house surge protection device will come with several thousand dollars worth of manufacture insurance covering your homes electronics if the device were to fail when properly installed.

We have a variety of whole house surge protections devices capable of providing safe and reliable protection for your home.  We offer Siemens devices as well as Eaton products we can install in your home or business today.  Stop procrastinating and call us before the next big storm moves across the Des Moines metro.  From Adel to Altoona, from Norwalk to Ankeny and all the surrounding communities we are here and ready to serve your 24/7.

Categories: Uncategorized« Des Moines 24 Hour Electrician  |  Storm Damage Electrical Repair 24 Hour Service »

With the evolution of energy-efficient LED lighting came an endless source of creative costume ideas. Small, cool & colorful lights now come in portable, battery-operated packages where the only thing stopping you is your imagination! This Halloween season, we’ve rounded up a handful of our favorite costume creations using a variety of light sources.

Mutant Cyborg Halloween Pumpkin

Part robot, part pumpkin, this crafty mutation is all ingenuity.

Glowy Zoey 

When Royce Hutain filmed and published this short clip of his daughter in her new home-made costume, it was an overnight sensation, even generating a call from the Jimmy Kimmel show. Hutain didn’t invent the LED light costume, so why the sudden fame? Maybe it’s the toddler waddle, all lit up in it’s glory. Or maybe it’s the chuckle of the gratified parents trying to keep the camera steady that just makes us crack up. Whatever it is, it’s absolutely brilliant. You can So Sew Easy

Any little girl can feel like a Princess with this delightful little light-up dress by light-up fairy wings! 

Jawa Costume

The poor Jawa, always back burner to the cool Jedi costume with LED Lightsabers, finally gets his turn in the spotlight in an adorable get-up complete with glowing eyes made out of orange LEDs. Make your own with this via via string lights.

Littlest Firefly