The kids are grown and have homes of their own, so it’s time to make those empty rooms into that den, office, sewing room or home theater that you’ve been wishing for over the years. Or, perhaps you’d like to update your kitchen with new appliances or add some new, luxurious bathroom lighting fixtures. Maybe you’ve been thinking about a whirlpool bath. Why not? However, don’t forget to give your local electrician a call as you’re planning those changes. Chances are good that you’ll need a few electrical upgrades to make sure your wiring system is ready to handle the increased load. Consulting an electrician in Pasadena who is licensed and knowledgeable about home renovations can help you keep you avoid last minute complications as your project gets underway.

Electrical system upgrades are often an afterthought when homeowners start planning a remodeling project. Often, the plans are made and the new appliances, lighting and other electrical components chosen before the very basic issue of how to power them is discussed with an electrician. Pasadena homeowners, for the most part, just don’t stop and think about things like electrical load distribution and wiring system capacities when picking out that new, streamlined refrigerator or over-the-range microwave. However, forgetting to plan for those practical things can lead to unexpected costs when the need for electrical upgrades to make it all work becomes apparent. Including a licensed and bonded electrician in the initial planning of your home improvement project can ensure that necessary electrical work is budgeted in from the start, eliminating unpleasant surprises.

If you’re planning a remodeling project and have yet to choose an electrician in Pasadena homeowners won’t find an electrical contractor than H Electric. With more than twenty years of experience with remodeling projects in the Pasadena area, we offer knowledgeable advice and quality electrical services to ensure that your project turns out right. And, every job we do is backed by our famous lifetime guarantee.

Click here to read more

A variety of ways exist to quickly and efficiently complete an electrical installation. One method involves using pre-made and pre-fabricated conduits, cables, panels, and devices. Pre-fab strategies cut down on repetitive labor costs and scrap material waste.

Furthermore, pre-fabricated components are assembled in quality-controlled factories by highly trained technicians. This ensures that every device and termination is in working order and properly connected. These technicians work faster and cost less per hour than a journeyman electrician, therefore saving the contractor time and money.

Another option to increase efficiency involves using pre-wired devices. They can be used for repetitive tasks like receptacles, switches, light fixtures, data ports, or fire alarms. They save time by eliminating the need to terminate each device individually. Instead, boxes are made to order and ready to install. The desired length of cable is attached and ready to run to the nearest junction point. Simply attach the box, route the cable, and connect to the supply wires. Most suppliers prepare a custom quote, further reducing time spent by the foreman planning and ordering parts individually.

Pre-wired panels are possibly the simplest way to save money, as they require no special tools. Wiring up a panel at the shop before heading to the job site allows you to function test it before installation. This ensures proper functionality. In addition, it keeps the interior of the panel away from weather and other possible sources of job-site damage. For larger or more complex panels, suppliers can be arranged and have the work performed by specialized technicians. Panels can even be ordered with pre-cut and pre-terminated lengths of cable or cord.

Most electricians have used pre-formed conduit, especially PVC which requires specialized tools to bend. However, entire runs of pipe can be custom ordered and pre-shaped. Especially useful in underground conduit networks or when complicated bends are required, these pre-made conduits drop in place and fit perfectly to the engineer’s prints. They also ensure that conduits are not damaged or kinked during the bending process and that no sharp edges or rough spots are left to damage wires or cables.

If the project demands it, entire buildings can be pre-made and pre-wired in a factory setting by trained technicians who specialize in quickly and efficiently preparing custom ordered buildings. Especially useful in industrial settings, these buildings come complete with all interior and exterior lights, switches, receptacles, and control wiring.

Often, motor control centers (MCCs) for large industrial installations are constructed this way. Therefore, on-site electricians are free to begin immediately running cables to motors and devices, with simple termination points inside a completed building. In addition to using fewer electrician hours, they also reduce required hours from other tradespeople such as welders or cladding installers.

Finally, pre-fab strategies are a great solution for reducing material waste, worker hours, and downtime while making deadlines a snap. Projects run smoother with fewer errors.

Depending on the size of your warehouse, as a manager (or owner) of that facility; you probably know that your building consumes a considerable amount of energy.

From your lighting system to your heating and cooling, to make such large buildings meet “workable” conditions can be tough and expensive. Although, this post is here to gather 5 critical ways on how you can meet green initiatives for your companies warehouse operations, all while maintaining those workable conditions your employees require.

By implementing the following ways, you will be able to realize a great reduction in not only energy waste, but also overhead costs associated with powering that wasted energy month to month. So there are two major benefits from all of this; one being you will create a more sustainable warehouse all while secondly reducing month to month expenses associated with operating your warehouse.

Without further ado, here is the first of many on this list of ways to save energy in your warehouse facility…

Imagine how great it would be to have the same amount of light that is outside, inside. Best part? It won’t be coming from artificial lights which cost money to run, but rather a natural light source that costs nothing other than installing skylights for that light to come in. This will easily and greatly reduce the amount of time that you need any type of light on in your warehouse.

Allow sun to illuminate your facility by installing skylights throughout your building!

These days HVAC is nearly installed in every building, including warehouses. Multiple things could be messing up your efficiency when it comes to heating, ventilating, and cooling your warehouse, and they all go back to that HVAC system.

For starters, ensuring that your professional building commissioning company to run a full audit of your warehouse, and they will tell you exactly what you need to work on for your building to be running exactly how it was built to run.

Conclusion

The process of addressing (let alone fixing) these issues and areas of concern may seem overwhelming, but keeping the end goal in mind will make the efforts to make these changes in your warehouse much easier. Taking it one at a time will make all the difference, but ensuring you are working on them overtime will be all that is needed. Just remember, all of these critical ways to reduce energy are going to not only make your company more sustainable, but it will also save you tons in overhead.

Have any other ways to save energy specifically in warehouses? Comment them down below to help out other warehouse managers / owners alike!

The United States has three main power grids: The Eastern and Western Interconnection, which each service multiple states, and Texas, which gets an independent power grid. The Electric Reliability Council of Texas, or ERCOT, handles 85 percent of the state’s power needs, producing and distributing electricity to 23 million people.

But, why does Texas need its own grid?

Slate reports that during World War II, Texas was home to many factories required for critical supplies. The electrical planners didn’t want to depend on energy coming in from other states, so they used the abundant natural resources to set up a grid specifically for Texas. Even today, this state requires a massive amount of electricity to keep the industrial sector powered, so it makes sense to have a dedicated grid.

Texas has a strong culture of self-sufficiency, which had an influence on the development of its own energy grid. It does have links to the other interconnections, which get used during particularly high demand periods. Unusually hot summers or long heat waves can sometimes lead to Texas importing energy, so the air conditioners keep going strong.

The utility companies governed by the ERCOT typically do not sell energy outside state lines. This configuration allows Texas to set most of its own rules and regulations, as opposed to the Federal Energy Regulatory Commission setting oversight in place. State regulators can make decisions that make the most sense for their residents, rather than making adjustments based on the needs of multiple states.

Texas has the space and natural resources needed to produce inexpensive electricity for residents and businesses. These costs fall below the national average. Renewable energy sources, such as wind-powered electricity, are moving Texas to more environmentally friendly options.

However, inexpensive energy does have a downside. Population growth in Austin is significant, thanks to startups, tech companies and other businesses moving into the area. Google Fiber also plays a role in bringing in more people. The energy grid needs to adapt to the rising amount of individuals who call Texas home, but electricity companies have less of an incentive to build in Texas compared to states with higher energy costs.

Contact Bryant Electric Service to make sure you’re getting the most out of the Texas Power grid and take back your energy today!

Understanding common household light bulb shapes, sizes, and styles is important whether you’re converting outdated incandescent fixtures into energy-efficient ones or using LED bulbs for new-construction applications. Every light bulb has identifying characteristics that are represented by a letter or series of letters and a number; these are known as light bulb codes. The letter or letters in a bulb code indicate either shape or special features such as reflector type. Numbers in a bulb code indicate size in millimeters or eighths of an inch. These codes will tell you if a bulb will fit in your fixture and if it’s the right shape.

For every light fixture or application, there’s going to be a specific bulb or light bulb shape that will fit best and provide the right type of light. If you understand bulb codes, it’s easy to look at a light fixture and know right away what kind of bulb you’ll need.

Let’s talk about light bulb groups, their bulb codes, and what applications those bulbs are typically used for.

Standard/arbitrary (A) bulbs are the most widely used and thought of when it comes to household lighting. These bulbs work well for a variety of applications, such as ceiling lights, lamps, vanity lights, kitchen lights, closet lights, porch light fixtures, and so many more.

Numbers in each code refer to the bulb’s diameter in one-eighths of an inch.

A15 bulb: 15/8 = 1-7/8″ diameter

A19 bulb: 19/8 = 2-3/8″ diameter

A21 bulb: 21/8 = 2-5/8″ diameter

A25 bulb: 25/8 = 3-1/8″ diameter

Most common base types:

Globe (G) bulbs have a full, round shape and are available in various sizes. They can be used for many applications throughout the home, such as foyer lights, kitchen lights, chandeliers, and ornamental fixtures. The most common type is the large G30 bulb, which is used in bathroom and makeup vanities.

Depending on the bulb, numbers in each code can refer to the bulb’s diameter in one-eighths of an inch or in millimeters.

G11 bulb: 11/8 = 1-3/8″ diameter

G14 bulb: 14/8 = 1-3/4″ diameter

G16/G50: 16/8 = 2″ diameter

G60: 60 millimeters = 2-3/8″ diameter

G25/G80: 80 millimeters = 3-9/64″ diameter

G30: 30/8 = 3-3/4″ diameter

Most common base types:

All of the bulbs in these groups resemble the shape of a candle flame and are often referred to as candle bulbs. Conical (C) bulbs are shaped like a cone. Conical angular (CA) bulbs are shaped like a cone but have a bent tip. Blunt-tip (B) bulbs are very similar to C-type bulbs but have more of a torpedo or bullet shape. These bulbs can be used in chandeliers, wall sconces, pendant lights, night lights, decorative light strands, holiday light strands, and other decorative home lighting applications.

Numbers in each code refer to the bulb’s diameter in one-eighths of an inch.

B10 bulb: 10/8 = 1-1/4″ diameter

CA10 bulb: 10/8 = 1-1/4″ diameter

C7 bulb: 7/8 = 7/8″ diameter

C9 bulb: 9/8 = 1-1/8″ diameter

C15 bulb: 15/8 = 1-7/8″ diameter

Most common base types:

BR stands for bulged reflector. Traditionally, the inside surface of an incandescent BR bulb is covered in reflector material that is used to gather and cast a wide beam of light away from the bulb. LED BR bulbs don’t require the reflector material. These bulbs can have a frosted, clear, or patterned dome-shaped lens that diffuses light and provides a gradual fade into nonilluminated areas. BR bulbs also produce less shadows when compared to PAR bulbs. They’re a bit longer than PAR bulbs and tend to protrude from light housings but are used in similar applications, such as track lights, recessed lights, display lights, or can lights.

BR20 bulbs are often referred to as R20 but have the same characteristics of other BR bulb types. The R stands for reflector.

Numbers in each code refer to the bulb’s diameter in one-eighths of an inch.

BR20/R20 bulb: 20/8 = 2-1/2″ diameter

BR30 bulb: 30/8 = 3-3/4″ diameter

BR40 bulb: 40/8 = 5″ diameter

Most common base type:

Multifaceted reflector (MR) bulbs are small in size with a reflective, faceted interior. The facets create a concentrated beam of light that can be displayed in a narrow spot or wide flood beam pattern. Because of the directional light they provide, MR LED bulbs don’t require the facets but often still have them. These bulbs are available in a variety of colors and can be used for many applications, including track lighting, recessed lighting, desk lights, and display case lighting. Many MR bulbs operate on low-voltage wiring systems, which makes them great for outdoor and landscape applications such as driveway lights, path lights, gazebo lights, paver lights, and malibu lights that have weatherproof housings.

Numbers in each code refer to the bulb’s diameter in one-eighths of an inch.

MR11 bulb: 11/8 = 1-3/8″ diameter

MR16 bulb: 16/8 = 2″ diameter

Most common base types:

Tubular (T) bulbs come in a variety of lengths and widths. Depending on their size, these bulbs can be used in applications ranging from chandeliers, wall sconces, and pendant lights to basement and garage troffer light fixtures.

Numbers in each code refer to the bulb’s diameter in one-eighths of an inch.

T7 bulb: 7/8 = 7/8″ diameter

T8 bulb: 8/8 = 1″ diameter

T10 bulb: 10/8 = 1-1/4″ diameter

T14 bulb: 14/8 = 1-3/4″ diameter

Most common base types: