As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

We offer hundreds of products that are designed for

(CRI) to show the true colors of products or material being displayed. CRI refers to how accurately a light source reveals the true colors of objects, people, and surroundings and involves a distinct testing method with comparisons to incandescent light or daylight. A light source with a CRI close to 100 shows colors very similarly to how incandescent light or daylight shows those same colors.

Many LED lights are also available in a wide variety of colors or shades of white, and LED controllers with wireless remotes allow for customized lighting, dimming, and color modes. These reliable LED lights are built to last and come with a minimum two-year warranty.

There are different things that you may do in order to see to it that you will be making the most efficient and the best possible use of the energy that you channel into your home. There are different options that you may tap in order to determine whether you have to make certain adjustments in your home’s energy system, one of them being Princeton energy efficiency audits. If you own a house and if you still have not had this process performed in your home, then it is highly advised that you do so in order to save.

Home energy audits allow you to carefully and efficiently pinpoint the energy needs that the different pieces of equipment in your home mount up to. Going through this process will give you an idea of how much energy you really need in order to keep your household running smoothly.

By having a professional audit done, you will not only allow you to see to it that you will have ample supply of energy for the different parts of your house, but will also keep you from overshooting your expectations and supplies. Without having to say it, you will be able to efficiently channel enough energy into the different parts of your home and ensure that you will not be using up more than necessary.

There are different standardized tests that are employed in order to determine the amount of power and energy that you need to have your home equipment run effectively and efficiently. More than measuring the needs of your whole house, you may even have other tests employed for individual rooms and areas, allowing you to map out and determine the energy needs and consumption that you may expect from the different areas of your house.

When you get the time and want to save on your monthly energy bills, it will be best for you to have Princeton energy efficiency audits done. tests employed to ensure that you ware able to make the most efficient use of your home energy.

Needless to say, home energy audits are always performed by professionals. Unless you have some type of background in the electrical/ energy field, it will be impossible for you to even know how to employ the necessary tests.

Don’t worry about finding the time to test the energy using devices in your home. Drop your local electrician a line and he will most likely be willing to perform this job for your home. Princeton energy efficiency audits can save you time and money when done right.

As lighting technology has advanced, one of the clear front-runners in long lasting, energy efficient lighting is the LED light. With uses ranging from interior lighting to landscape lighting, there are many reasons why you should switch your home lighting over to LED. Because LEDs are being manufactured in many of the same form factors that you are familiar with, you have the option of calling a Burbank electrician such as The Electric Connection to help you switch out the majority of them if you feel it’s too overwhelming of a job, or you could take it on by yourself. If your lighting project is more extensive than changing out a few light bulbs, and you plan on installing recessed lighting or new fixtures, you should definitely look into having the work done by a professional electrician in Burbank.

Benefits of LED Lights

The most publicized benefit of using LED lights for most lighting applications is the extremely low energy usage and long lifespan. This benefit is seen best when compared by an electrician in Burbank CA with other light bulb technologies. A standard incandescent bulb has a lifespan of around 1,000 hours, a compact fluorescent has a lifespan of around 8,000 hours and an LED has a lifespan of nearly 30,000 hours. This is a huge increase, meaning that you will have to change your bulbs much less frequently than before. Furthermore, LED light bulbs are mercury free, unlike compact fluorescents.

In regards to energy efficiency, LEDs are also way ahead of the pack. As a result of the low energy required to run an LED bulb, there is also much less heat required. This leads to lights that are cool to the touch, making them much safer for many applications. When asked about power consumption, an electrician in Burbank will tell you that LED bulbs use much less than any other currently on the market. For example, a 40-watt incandescent bulb burns just as bright as an 8-12 watt compact fluorescent or a 4-5 watt LED. By switching from incandescent to LED, you’re only using about 10% of your previous energy. This can make a huge difference, considering that lighting can make up almost 25% of any home energy budget!

Choosing an LED

When choosing an LED, there are many factors to be taken into consideration. If your home lighting project is extensive, think about doing a quick Internet search for electrician Burbank and then find one that you can trust such as The Electric Connection. Working with an electrical contractor on this type of project is very much like having ceiling fans installed, outlets replaced, bath fans installed or having new switches or lighting dimmers installed. A licensed Burbank Electrician such as The Electric Connection will be able to explain everything that needs to be done in order for your custom lighting job to be done well. If you are just looking to replace some of the bulbs in fixtures around your home, there are just be a few things that you should know.

To make things simple, most packages rate their light bulbs with both actual watts, and watts relative to an incandescent. This means that if you are using a 45-watt incandescent, you should be able to find a 3W LED with packaging that lets you know that they are equivalent. If these comparisons are not listed on the box, there should also be a lumen rating. If necessary, you can compare the lumens between types of light bulbs. When choosing light bulbs for your fixtures, you will most likely be shopping for diffused bulbs. These bulbs look very similar to a standard fluorescent bulb, and help to diffuse the light. This gives the light a more natural feel. Other types of lights include outdoor landscape lights, such as floods and interior spotlights for more focused light concentration. Regardless of what type of lighting you choose, your licensed electrician Burbank CA can always help you with any questions that you might have. Enjoy your new lighting!

Visit our company profile.