Electricity is an important part of our life. However, when it comes to electricity distribution, it needs to be done in a safe and secure manner. It entails several handling hazards, which, when not done safely, can easily turn into a deadly trap. There are times when accidents and mishaps happen due to the lack of safety at different power distribution units.

Therefore, to maintain the security levels at all distribution units and sub stations, it is critical to install safety devices and mechanisms. While there are many mechanisms that help in safeguarding electrical connections at residential and industrial areas, switchgear is one of the most popular ones due to its various functions and features.

Analyzing switchgears from the perspective of commercial, industrial, and institutional MV (medium voltage) distribution system, its functions are as follows:

Types of Switchgears

There are two main types of switchgears which are necessary for various commercial, residential, and industrial electrical connections. They are:

Does the concept of a whole house surge protector have you scratching your head? Perhaps you’ve envisioned a super-sized power strip? Or maybe a large magical box capable of absorbing lightning bolts? Whatever your misconceptions about whole house surge protectors, we’ve got the 4-1-1 you need to help you protect your home and all its valuable appliances from those inevitable and frequent power surges.

Simply put, a whole house surge protector protects all the appliances in your home from voltage spikes, limiting excess electrical current by blocking its flow or shorting it to ground, much like a pressure relief valve. This includes surges occurring not only from lightning, but the 60-80 percent of surges that occur from within your home – typically from major appliances cycling on and off. With all of today’s electronics, you simply can’t afford not to protect your home with a whole house surge protector.

Whole house surge protectors are typically hard-wired to your electrical box. Proper installation is essential. A whole house surge protector must be properly grounded, since without proper ground even the best surge protector will be unable to perform its job.

Whole house surge protector installation by a professional typically takes about two hours. Unless you are highly skilled in electrical, it is strongly recommended to hire a professional electrician to install these devices. The electrical wiring on your service panel may be confusing, improperly installed, or house defects that could pose a danger to DIY installers not in-the-know. In addition, without proper grounding, your whole home surge protector will not function properly. For the safety of your home, your appliances, and your family, consult a professional for whole house surge protector installation.

Many components in today’s sophisticated electronic devices are sensitive to power surges. However electronics and appliances containing microprocessors -- an integral part of most of today’s appliances and technology -- are particularly sensitive to surges. Since microprocessors only function properly when they have the right voltage, a power surge can easily damage these fragile devices, affecting everything from central heating and air to kitchen appliances and entertainment technology.

Due to the prevalence of sophisticated electronics in today’s homes, every home should consider installing a whole house surge protector. In fact, everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends them. And while insurance companies don’t give discounts for surge protectors, they can easily pay for themselves in the event of a single power surge. Give your home the protection it needs with the help of Mr. Electric®. Contact Mr. Electrictoday for the fast, safe installation of this inexpensive and easy to use safety device for all of your essential electronics.  

As a rule, the bottom of any hanging light should be at least 6’8″ off the ground – unless it’s over a table or island. When you have an 8′ ceiling, this doesn’t give you a whole lot of room to play. If you long for the grand impact of a decorative

A room with a single light fixture is depressing. Kick the shadows by adding multiple light sources. A few stylish flush-mount ceiling lights. Some table lamps. An accent light here or there. When you have multiple lights shining in different directions, the space will feel lighter and more open. Make sure to place ceiling lights at least 3′ from the wall, any closer and harsh shadows will make your ceiling seem lower. 

The search for commercial lighting systems can be confusing, misleading, and overwhelming at times. With all of the different terms, labels, and technologies being used how can anyone expect you to make any decisions with all of that going on?

Well, this post is going to at least relieve your confusion about DesignLights Consortium vs EnergyStar approved and qualified lighting products. There is a difference, and you need to be well aware of what it is when you are looking into a new lighting system for commercial Click here to read it, then come back to finish the rest (opens in a new window)!

The major difference between DLC and EnergyStar is that DLC is only for commercial lighting products while EnergyStar is more focused on residential purposes and applications, with a minor hint of commercial lighting in there as well. This makes DLC the more “go to” organization when it comes to commercial lighting qualifications as they are seen as the experts on commercial lighting products and technologies.

Anyways, when it comes to becoming EnergyStar qualified for a lighting product, a product needs to pass these (along with others) guidelines to be able to be EnergyStar qualified:

Conclusion

After this quick, simple, and brief overview of the differences between EnergyStar and DLC; we hope you’ve found some light on the topic (get it, light).

In a general sense, most of your commercial lighting purchases will include DLC qualified products, especially when buying for warehouses, factories, parking lots, street lights, and the like all except for those listed.

Are you confused on any point? Have any comments or questions? Comment them below and we will surely find an answer or response!