At times, building codes can seem like a hassle that only create more work. But the truth is that these codes are put into place to keep us safe. Just like how a poorly formed foundation can cause massive damage to your home, cutting corners in electrical wiring could cost you your entire house. Whether you’ve purchased a new home, are trying to sell your existing home, or you just don’t know, its a good idea to bring your home up to the electrical code.

The best way to start bringing your home up to code is to target critical areas. These are places that see heavy electrical usage and potentially hazardous situations. Areas such as bathrooms and kitchen are very important to have up to standards. In the bathroom moisture can eat corrode wires and outlets which can cause electrocution. The kitchen also uses the largest, energy using appliances in your home. These outlets should be safe and grounded; if they are not, it can cause fatal injury.

In addition to these locations, there are several other places that should be targeted:

The best way to ensure that your home is up to code is to have a home inspection by a professional. With the long list of potential problems, only a professional can identify the work that needs to be completed. Especially when buying and selling a home, it is important to bring it up to code.

The average household in Virginia pays $125 per month for electricity, according to the U.S. Energy Information Association. In Maryland, that number is $136 per month and in DC, it’s around $90. For commercial properties, the figure is even higher. But at Kolb Electric, we know that there are simple steps you can take to lower your electric bill—and we’re going to share a few key tips.

1. Check for gaps in windows and doors. Perhaps the easiest thing you can do to reduce your energy usage, and thus your electric bill, is to check your home at the beginning of each season for gaps around the windows and doors. It’s important to do this every six months or so, since your home can settle and shift slightly over time. It only takes a small gap for energy to escape.

2. Turn down your water heater. The standard setting on most electric water heaters is 140 degrees. Turning the heat down to 120 degrees can save you $60 or more each year in water heating costs. Save more by replacing your water tank with a tankless system.

3. Repair leaky ducts. If your ducts have holes in them or if they have come partially unattached, then you’re paying to cool and heat air that is never getting to your living spaces.

4. Have your HVAC and electrical systems serviced annually. Keeping all electrical systems, as well as HVAC products, well-maintained can not only extend their lifespans and help ensure your safety, but can save you money on your electric (and gas) bill too. Your system has to work harder and use more energy to push through an accumulation of dirt and debris. Regular electrical maintenance can also prevent the need for costly repairs.

5. Check your electric meter against your monthly statement. It’s a good idea to get in the habit of checking your electric usage on the meter and comparing it to your statement. This allows you to easily determine whether your monthly energy bill is accurate and provides you with the information you need to monitor your usage so you can use electricity smarter in the future. Click here to learn how to read an electric meter.

At Kolb Electric, we don’t want you to pay any more than necessary for your electric usage. For more tips on how to reduce your electric bill and/or to schedule you annual service appointment today, call us at 877 287-1179. Our licensed electricians have been helping Mid-Atlantic homeowners with their electrical needs since 1925.

Every home uses energy in one form or the other; and in most instances, this electricity comes from the power grid. Statistics indicate that almost 50% of a home’s energy is used by its HVAC systems while about 12% goes into the lighting. Most property owners presume that all the energy-efficiency upgrades happen through various home improvement upgrades such as replacement of wooden windows and doors with energy-efficient 2 or 3-paned vinyl windows etc.

While these changes do add to the energy-efficiency of your home, there are a number of electrical systems and maintenance upgrades that can significantly improve your energy usage, such as:

It’s not uncommon for us to occasionally leave the lights on when we leave a room. Or there may be times when we leave the deck, patio or poolscapes lights on all night with the security aspect in view. These types of habits can become a significant energy drain, but there is a way to curb that. We can install motion sensor lighting in the exterior spaces of your home; the lights will get switched on only when the sensor picks up any movement within its range. This helps you save energy without compromising on the safety factor in any way.

Most people don’t realise that their local electrician can help them when they are upgrading to energy efficient appliances. The fact of the matter is that simply replacing older appliances with ones that have high energy star ratings may not always help them reduce their electricity bills.

When you upgrade the appliances in your home such as air-conditioners, dryers, dishwashers and washing machines etc., these appliances tend to need a higher wattage compared to the older ones; this means the upgrade may actually strain the circuit breakers and your electrical system. It’s important to get a skilled electrician to come and check whether the existing wiring and system is built to bear the higher electrical loads that the newer, advanced systems need.

Inadequate or improper insulation is one more major sources of energy loss on most properties. And if you are considering a home renovation/remodelling/extension project, it’s a good idea to upgrade the insulation in your house as well.

Today, many property owners are quite committed to opting for eco-friendly alternatives to many materials and systems. If you feel you want to reduce your carbon footprint, you might want to consider installing solar panels in your home. This can significantly reduce your reliance on grid power.

Upgrading appliances or making major electrical upgrades can sometimes prove to be an expensive proposition and may not fit into everyone’s budget. This is why it’s important to know how to make some smaller changes that will also add to your home’s energy-efficiency. Some things that can make a big difference are:

We at AllRound Electricals can provide excellent energy audits and electrical upgrade and maintenance solutions. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263