Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!

Your home is constantly changing and evolving. It is one of the things that makes home ownership fun. It is exciting to sit down at night and look around your home and your yard and think of the different things you could do to make it a little better. The definition of the perfect home is always a little different and it can change from year to year. If you have some big plans that you would like to see happen in and around your home, you need an electrician in Pasadena. The Electric Connection has been around for years; helping homeowners just like yourself turn their home into their dream home with various projects and upgrades.

It doesn’t matter if your dreams are big or small, your electrician can help. It may be something as simple as adding a few outlets to your kitchen or installing a beautiful center island to make your meal prep easier and more efficient. Sometimes, you may have no idea where to start or what is actually needed to make one of your dreams a reality. This is why you need the help of somebody familiar with the ins and out of Pasadena electrical work.

Your job will be to communicate what it is you want to achieve and then an electrician will give you a free electrical estimate to let you know what kind of costs you can expect to incur. Keep in mind, the electrician will be providing the electrical portion of the job. You will need to do any actual renovating and construction yourself or hire a carpenter to take care of that part. You will want to choose an electrician who will work with your contractor while ensuring your electrical needs and desires are taken care of. You can count on The Electric Connection to provide you with an experienced electrician. Give us a call today.

For some, flickering lights are an annoyance and can be a distraction. Others don’t notice the inconsistency in the lights. But, that fluctuation in light can signal problems in the circuitry or light fixtures in one’s home. Depending on the source of the problem, it could lead to serious safety issues in a home.

All lights flicker to some extent, based on the amount of power that is coming into the lines in your home.  If your lights flash or flicker regularly, it’s often a sign that there’s a problem – either in connection or power use. Situational flickering – like when an air conditioner starts – is a sign that there’s an issue with power supply. Simply put, the dip of the lights when the AC unit starts up occurs because the AC pulls the available electricity supply from the light. It’s usually temporary. It may also be a sign that the outdoor AC unit isn’t wired for maximum amperage. If the flickering lights aren’t related to a large appliance powering up and running, it’s a sign that there are issues – home may be brighter and more comfortable.

Halloween is a little over a week away, and whether you’re throwing or attending a party, taking your kids trick-or-treating, or getting your house ready for trick-or-treaters, it’s sure to be a night filled with endless fun – and scare. However, we want to help ensure that the kind of scare that may ensue is all in good fun, and not legitimate.  This is why we want to provide some helpful electrical safety tips to those planning on transporting party-goers or trick-or-treaters to another realm with their decorations.

Electrical cords in high-traffic areas can be dangerous as it can cause people walking over them to trip and get hurt. Furthermore, you should inspect your cords for exposed or frayed wiring. Wires that aren’t 100 percent intact increase the chances of electrocution and fire, so always err on the side of caution and replace cords that could pose a threat. While Halloween is intended to a night filled with surprises, but don’t let one of them be a trip to the emergency room.

To prevent guests from tripping over cords, consider purchasing cord covers or using duct tape. Your local hardware store should carry both of these.

Before hanging lights inside or outside, check the box to see that they are Underwriters Laboratory (UL) approved. This means they will have been tested and are completely safe to use. If lights are UL-approved and tested, you should easily be able to find the label on both the outside of the box as well as on the actual lights themselves.

Just like your electrical cords, you should always inspect your lights for frayed and exposed wiring as well as faulty plugs. If you do find that they’re not in good condition, the best thing to do is replace them. Continuing to use these lights will only increase the chance of electrocution and fire.

Don’t staple or nail electrical wires or cords because doing so could cause a malfunction in the system, sparks, or a fire. Furthermore, avoid attaching wires or cords to anything metal. Follow the directions closely to ensure safety.

Leaving for work? Going to bed? Don’t forget to unplug your lights and decorations! When you leave things plugged in for longer than they should be, you run the risk of having overworked bulbs and wiring, which could lead to a fire. By unplugging them, you can have peace of mind while you’re away, not to mention, you’ll save money on your utility bill!