You might be a fan of their appearance, but aluminum light poles bring more to the table than just their looks. Whether you opt for squared or rounded varieties, these light poles have become more popular than ever. This is thanks to their impressive ratio of strength to weight, as they are sturdy while still being lightweight. Additionally, they feature a high resistance to corrosion. These advantages, coupled with their recyclability, make aluminum light poles a perfect match for sustainable projects and harsher environments.

Aluminum is a great material to use when you’re prioritizing strength and reliability. However, just as important as the variety of light pole is the installation procedure. If your poles don’t have proper installation, you could be losing out on the benefits of the lights. A sloppy installation by the wrong people compromises everything from the reliability of the lights to your safety.

Not all vibration is bad, but the destructive form of it can cause serious damage over time as cracks begin to form and then spread along the pole’s side. If the pole’s movements are not equal in either direction, it is simply usual sway, and therefore no reason for concern.

On the other hand, if it is constantly moving back and forth an equal distance, with the motion based at the center of the pole’s shaft and not on top, you’re seeing potentially destructive vibration. Eventually, this can lead to the pole shaft cracking and falling, breaking just above the part of the base where the weld held it together.

Several factors contribute to pole vibration. These include the pole shape, the surrounding environment and the installation. Whoever performs the installation needs to follow the appropriate guidelines for the size and type of pole, as each pole can handle a certain load. If your installer uses the wrong light fixture, destructive vibrations could be inevitable.

Every installation job will have its requirements, based on the client’s needs as well as the location in question. One aspect that doesn’t change, however, is the importance of safety. Light pole installations fall under the umbrella of electrical work, which is always a dangerous area for anyone who isn’t an expert. Any piece of electrical equipment improperly installed can become a safety hazard, and aluminum light poles are no exception.

Your installer must comply with local codes and requirements as applicable. As such, they need to provide proper electrical groundings. Failure to do so can be a serious violation of important safety regulations. Worse, it can lead to a very dangerous situation for you and anyone exposed to the light poles.

As electricians, energy efficiency is always at the forefront of our mission. Since heating and cooling account for nearly half your utility costs, we believe that it is our duty to help customers integrate efficient home practices that cut costs but not comfort. Now that the spring season is in full swing, make sure your home is a respite by installing ceiling fans throughout your home. Ceiling fans boast numerous benefits, all of which you will thoroughly enjoy throughout every season. With temperatures soon to be on the rise, you’ll want to act quickly before it’s sweltering.

There’s a common misconception that ceiling fans cool rooms, however, the truth is that they actually cool skin. Therefore, if you were to leave a fan on in a room where nobody is present, you would only waste energy. To get the most out of your ceiling fan, you need to actually be in the room for the wind chill effect to work.

If you are interested in learning everything about electricity, you should start by understanding the basic components that make up any electrical design and how they work. Think about how the great pyramids of Egypt were built using just blocks of rock. The rocks themselves were nothing, but when combined with careful design they formed such grand structures!

Similarly, you need to know about the basic electrical components and how they work together to create wonderful modern electrical systems. Below you will find information about the most common electrical components:

The very first component that you should know about is the resistor. It is fairly easy to assume that a resistor, as the name suggests, will resist electricity that flows through it, and you would be correct in that assumption too! Any situation that demands the flow of current to be controlled at a desired level will require a resistor.

Here are two scenarios that better explain what a resistor does. In both cases, we will be turning on a LED:

Scenario 1 – Without Resistor

Scenario 2 – With Resistor

If a resistor is like a cushion that is used to control the flow of electricity, then capacitors are like small rechargeable batteries that store small amounts of charge in them. Capacitors do two things at the same time:

By so doing, they are able to stabilize almost any circuit. There are two types of capacitors that are primarily used:

I briefly alluded to LEDs in the scenarios that were used under “Resistors” above. LEDs are just like bulbs except that they are extremely reliable. You can find them on practically every appliance in your home that features some kind of an indicator light. A typical LED bulb can last decades with no sign of dying.

Since they are so reliable, they are used to indicate the state of current at any point in a circuit. An important task like checking the output voltage or current on a circuit becomes simpler with these light-based indicators.

The resistors, capacitors, and LEDs are the simple stuff in electrical circuits. Now, let us talk about the first complicated component – the transistor. Transistors are used to build complex electrical systems, such as amplifiers for instance. A simple way to understand transistors is to think of a switch. A basic switch has an “on” and an “off” state. These are controlled by the position of the switch, which is changed manually.

A transistor is a more advanced switch that has multiple output states. Unlike a switch, you cannot change these states manually. The only way to switch the transistor between various states is to run current through it. By controlling the current that flows through the transistor, you can control the output state to achieve the results you desire.

Get him two Battery operated LED Picture Light.

source) Make sure your BBQ Master has enough light to control the flow of wickedness with the Black Mo Tools Axe by Brook & Hunter and a Power Box 360 stereo by Bosch is a dust and moisture resistant powerhouse with a rubber cage exterior. Rock the night away with a LED Headlamp for smaller, intricate ones that need direct light.

You know the kind — he has the biggest TV you’ve ever seen and has an entire room devoted to it. Upgrade the man cave with his favorite LED Fiber Optic Star Ceiling Kit.

This is the second blog post in this year’s 15 smart gift ideas for students of any age. Visit our Holiday Specials!