Cappuccino Doughnuts courtesy of Ann Stratton from CountryLiving.com

Find your angle. 

Playing with the direction and angle of your light source is essential. With the right play between light and shadow, you can accent the most titillating parts of your dish, while camouflaging any flaws. Texture greatly contributes to the delicious appearance of most any meal. Notice how the angle of the light below highlights the different textures within this broiled flank-steak sandwich.

This weekend many people around the country set their clocks back to adhere to daylight savings time (DST).     How did this tradition start, and why do we follow daylight savings time?

Although daylight savings has only been used for about 100 years, ancient civilizations had been known to use a similar system.  Ancient people would adjust their daily schedules to the sun’s schedule.  Benjamin Franklin is often credited with bringing daylight savings time into the modern limelight.  He suggested, in a essay, although jokingly, that Parisians could economize candle usage by getting people out of bed earlier in the morning, making use of the natural morning light instead.

Both George Vernon Hudson and William Willett had also suggested a system similar to daylight savings.  Both men suggested setting clocks either forward or back to coincide with daylight hours.  Willet actually suggested eight time changes a year moving clocks in 20 minute increments.  This plan was introduced to the British House of Commons in February 1908, with the first bill drafted in 1909, however, the idea was never made into a law.

Daylight Savings in Europe

Germany was the first country to implement DST in 1916 in an effort to save fuel for the war.  The innovative idea caught on and countries around the world used DST during the war, but many reverted back to standard time after WWI.  U.S. President Franklin D. Roosevelt instituted year-round DST in the United States, called “War Time” during World War II from February 9, 1942 to September 30, 1945.

Modern DST in the U.S.

In the United States, DST caused widespread confusion from 1945 to because states and localities were free to choose when and if they would observe DST.  In 1966 Congress passed into law the Uniform Time Act which stated DST would begin on the last Sunday of April and end on the last Sunday of October. However, states still had the ability to be exempt from DST by passing a local ordinance.

Daylight Saving today

Efficient, successful electrical troubleshooting takes a special kind of Beverly Hills electrician. This is the sort of skill that can’t come just from book knowledge and a college degree. Electrical troubleshooting is built upon solid, hands-on work experience and an in-depth expertise in tracking down often elusive electrical system problems. A talented electrical troubleshooting expert is a valuable find for a person dealing with a so far unidentified commercial or residential electrical system problem because an unresolved electrical problem always has the potential to turn into a real hazard at some point. You need an electrician in Beverly Hills that can find the problem quickly and get it taken care of efficiently.

Some electrical problems are pretty straightforward, resolved quickly and easily by an electrical upgrade or two or a bit of electrical rewiring. Others, however, present a bit more of a challenge, especially electrical problems that are intermittent. Those can be difficult for the average electrician to identify and deal with. They say that admitting there is a problem is the first step, and the concept applies to electrical systems. If an electrician can’t find the problem, he won’t be able to fix it and restore your electrical system to optimum functionality and safety. That is why you are better off dealing with the sort of expert team of professionals you’ll find at the Electric Connection.

The Electric Connection has been working throughout this region for more than 30 years, handling a wide variety of commercial and residential electrical projects successfully. They’ve built up a solid reputation for the quality of their residential and commercial electrical work, as well as for the dedication with which they strive to achieve a high level of customer service. This electrician Beverly Hills CA electrical contracting company offers a lifetime guarantee on all of their work, as well as a free home electrical safety assessment with every job they do. That way, upcoming repairs can be spotted and maintenance needs pointed out, helping customers to avoid being caught by surprise by a system failure or hazard.

This company is very serious about its customer service standards. If you schedule an electrical service call with an electrician in Beverly Hills CA from the Electric Connection, and your technician gets there even just a single minute late, your service call is free. That is evidence of a well disciplined, extremely professional team, because obviously an electrician that can’t be on time and professional is not going to last long there. This company also offers free over the phone help and devotes a section of its web site to electrical troubleshooting and electrical system maintenance tips. They also offer free over the phone estimates, based on the situation or symptoms as you describe them.

You may be able to limp along or work around an unidentified electrical problem for a while, but eventually it is going to get worse. And, you can’t predict when that will happen or how bad it will fail. A sparking short behind a wall could burn your house down, in the worst case scenario. A problem that could have been managed with a little bit of rewiring or by installing a new electrical circuit if an experienced Beverly Hills electrician and electrical troubleshooter has been called in to find the problem, may end up being a much costlier repair, such as a whole house rewire.

If you have a commercial or residential electrical system problem that needs to be properly diagnosed and repaired, choose an electrician in Beverly Hills CA that has the experience and expertise to get the job done right the first time. Electrical problems should be dealt with as soon as possible, because delay could result in a more costly repair situation or could even end up causing serious property damage or worse. The Electric Connection has the Beverly Hills electrician and troubleshooting experts you need.

Click here to visit our website.

The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263