A power surge is an increase in voltage flowing through your electrical units that rise above the standard voltage levels (120 Volts). These surges can be caused by lightning, high-powered electrical devices (elevators, air conditioners, refrigerators, etc), faulty wiring or even problems with your utility company’s equipment. Inevitably, these are all occurrences that we cannot prevent ourselves, so how can you protect your home and equipment from these damaging power surges?

Surge Protector

A simple solution is plugging in your electronics into a surge protector. A surge protector is a device used to protect your electronics from damaging power surges. However, many people use this tool for a much more obvious function, to plug in multiple components into one outlet, not knowing its protective capabilities. You most likely use at least one surge protector in your home already. But how does it work? How do you know that you are providing the top quality protection for your important devices?

How it Works

As you know, your surge protector pulls electrical currents from one outlet and passes them through all the electrical devices plugged into the surge protector. This aside, the more important feature of this device is its metal oxide varistor (MOV) component, which diverts extra voltage and preventing it from damaging your electronics. This MOV acts in different ways depending on the voltage flow to provide your devices consistent access to adequate levels of power. If the MOV indicates high levels of voltage, it will reduce the resistance and if the voltages are low it will create a higher resistance. However, it is important to be aware that these MOV’s can also burn out. By investing in a power surge with an indicator light you will always be able to determine whether or not it’s functioning appropriately.

In our next blog, Power Surge Protection: What to Look For, we will be discussing how and where to use your surge protector and purchasing tips for finding a quality protector. For more information on power surges and how to protect your equipment, contact the experts at Expert Electric. 604-681-8338

When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

The pool at your Tampa home is an excellent place to enjoy recreation, to relax, or even to host events and parties. But are you getting the most out of your pool design? The use of light can add not only dynamic appeal to your space, but provides a greater level of safety. Not to mention the fun of a nighttime pool party!

A solar array, in the simplest of terms, is a group of connected photovoltaic solar panels. These panels, or groups of cells are strategically linked and arranged so that they function as if they were a single panel. In some cases, the term solar array is also used to denote a similarly arranged group of mirrors that are used to reflect and focus sunlight onto an array of photovoltaic panels. There is no set size for a solar array, and sizes range from a small array designed for home use to a solar panel array that is several acres large and consists of hundreds or thousands of panels.

On a more base level, each solar panel array is made up of an array of photovoltaic cells. These cells are responsible for taking the sunlight and converting it into electrical current. Because of an increased interest in renewable energy and environmentally friendly electricity sources, solar panel installation is on the rise.

Solar installers install most arrays in a fixed position. Depending on your particular location, most arrays are installed facing due south. In some cases, however, a solar panel array could be attached to a group of highly efficient motors that are designed to turn the panels to face the sun throughout the day. The motors do use a small amount of energy, but not nearly enough to offset the amount that has been generated. Although this can increase the amount that solar panels cost, it can greatly increase the amount of electricity that is generated in an average day.  The

If you are interested in adding a renewable energy source to your home or business, solar installation is the way to go. To learn more about your options for installation, financing and purchasing your solar panels, visit the Solar Panel Info website.