The best Allen electrician can tell you that chances are, your air conditioning unit is probably going to be the most frequently used electrical appliance in your home this summer.  Making sure that the a/c unit is running efficiently and safely is the best way to save money and prevent costly and dangerous electrical problems. Still, as the best Allen electrician will also tell you, preventing electrical issues can be difficult for someone who doesn’t recognize electrical problems immediately. After all, most of us who are not professionals probably don’t.

Surprise! It’s NOT Your Unit

As the temperatures rise this summer, keeping up with the maintenance of your air conditioning unit is one of the most important things you should do. However, when customers hear about maintaining their a/c unit, they often think in terms of Freon and condensers. The truth is that, although those are clearly important, one aspect that is often overlooked is the electrical part.

It may surprise you to know that calling an air conditioning guy when your unit is on the fritz isn’t always the right thing to do. In fact, any Allen electrician will confirm that, indeed, half the time the problems aren’t with the a/c unit but with the electrical system. If the problems are electrical, they can result in dangerous blowouts and burnouts that could cost you a fortune—or even your home, if a fire were to start. So, with so many things that could go wrong, how can you be sure that the problem calls for an Allen electrician and not an air conditioning repairman?

Air Conditioning Electrical Safety Tips

For instance, did you know that a lot of electrical problems arise when swapping air conditioning units? Something as deceptively simple as trading your current unit for another one, especially if the new unit is larger, can wreak havoc on your electrical system. The amount of wattage required to power the new unit can result in overloading, overheating and damage to the unit as well as to your home’s electrical system. You can burn the lines quickly. Some who think that they have found the solution in splicing their lines to accommodate a newer unit may also be in for a dangerous wake-up call. Splicing lines is never a good idea. When in doubt, call your local electrician. He understands what should be done.

Another thing that your electrician understands that you may not be aware of is that you need him to come out and inspect your circuit breakers regularly to make sure that no wires are melting, no circuits are going bad, and there are no potential fire hazards looming. Because a/c units consume so much power, many times they are wired directly into a circuit breaker. Loose connections in the circuit breaker can cause many problems, including irreparable damage to the electrical system. Be sure to always have an electrician come check your breaker and wiring to be on the safe side.

The electrical work is not limited to the obvious parts of the unit that may need help. The Forced Air Unit (FAU) part of your air conditioning unit is one of the most prone to electrical failures, and yet it is the one part that is often overlooked because it’s located somewhere in a closet, a spare room, or a utility space inside the home. The blower fan inside the FAU often blows out, causing issues with the overall functioning of the unit. Here’s the best way to prevent this: Make sure your electrician does routine maintenance on every part of your air conditioning unit, including the FAU, to prevent blowouts.

Electric Man: Best Allen Electrician

The best Allen electrician makes no bones about the importance of checking your electrical systems when turning on your air conditioning for the sizzling Texas summer, and how much you can save on your summer electricity bill, repair costs and a/c maintenance and repair. As summer heats up, let the team at Electric Man take a look at your unit and help you save money, time and repairs. For more helpful tips, read ElectricMan’s blog or connect with us on any of our social communities. If you have any questions, feel free to call us at 972-792-7270, or use the Contact form on our website!

I have a great deal of interest in digital photography, but my life is as crazy as anyone else’s. My son, family, and work keep me busy from dawn to midnight every day. I’ve never had time to cultivate any photography skills, even though I’ve always been very interested, sitting on the edge of my seat, if you will, for a chance to take some digital photos in order to learn a little about how capturing light can create astonishing works of art.

My interview with Matthew Danser had given me my long sought “excuse” to try out some photography techniques. But it also required that I put in an honest effort. The thought in the back of my head: These photos are going to suck. Probably a lot. And they will most likely be seen by the thousands of people who visit this blog monthly. Second gulp.

But I’m the kind of person so riddled with ADHD that even my paranoia about being judged on a mass scale can only last about three minutes before the audacity to try anything resurfaces and action is taken. So here’s what happens when a total amateur who has no idea what he is doing tries to “Paint with Light.”

A one-dollar flashlight from – you guessed it – the Dollar General. One dollar. Even. Gotta love it. Especially since it’s all I could afford, seeing as how I’m still paying off the aforementioned Nikon that I bought to take photos of our baby son. (True, a million pictures have been taken of him during his first year-and-a-half on Earth. However, 999,999 of those photos were taken with an iPhone. Go figya.)

THE PLAN, STAN:

The plan was to wait until it was dark in the apartment and do some light painting. I knew that I could use the Shutter mode on my camera to set it to take exposures of up to thirty seconds. I saw that my camera also had an option for bulb release, so, invoking Danser, who recalls how his girlfriend had to hold down the button on his camera for a full thirteen minutes, I determined that if I asked really nicely, I might be able to persuade my wife to hold down the trigger to get exposures longer than thirty seconds. Otherwise, thirty seconds was my window of time to do all the light painting I could.

I started off pretty timidly. I had seen photos online in which people used long exposures to create squiggly lines. The most popular examples are pictures of traffic at night, headlights and tail lights streaming, giving you a sense of the fluid motion of busy intersections. You’ve also seen those nature pics in which streams and rivers and clouds and stars become gauzy with movement because of long exposures.

But what I really like about Danser’s work is the use of color. The effect of running inside the hut and popping off red-gelled flashes shown at the beginning of this blog post (Matthew Danser! And happy lightpainting, everyone!

AC driven LEDs are rare but popular in certain applications. Designers focus on LEDs because of their advantages like direct, brilliant light, strong color saturation, slim measurements, dynamic lighting scenes and in total all the design possibilities that are thinkable. The only restrictions are made by the heat that needs to be dissipated by surface, natural or forced ventilation and the driver’s measurements. The driver is mostly not slim at all. That is why AC driven LEDs can be a smart consideration.

Conventional LEDs, Modules and Light Engines are driven by DC (direct current) power supplies. The LED characteristics are highly dependent on these components as they control the inrush current, convert the alternate current down to DC voltage and stabilize the current the LEDs are driven with. The efficiency of the system is dependent on the driver too as the power factor is one part in the total sum. Most conventional DC power supplies support LED systems with power factors (PFC) of 0.9 and higher.

The lifetime of LED lighting systems is defined by electronic devises. The LED can last up to 100,000h but if the driver needs a replacement after 50,000h the system is only half worth the maintenance. Without any driver at all the problem is solved completely. Power supplies need space, no matter how small, the driver is mostly bigger than the LED modules and electronic component’s wiring needs space too. Without this item there are not restrictions in design any more than heat dissipation. Designers can release their full creativity.

AC driven LEDs are of advantage concerning design and lifetime options. The more complex the circuit, the higher the possibility of system failure and electrical noise. On the other side, the efficiency of AC driven LED modules is not that high like DC driven ones. The performance achieves 110 lm/W these days which is good compared to other light sources but behind DC driven LEDs with up to 140 lm/W and more. AC driven LEDs are a thinkable substitute in applications like bulb lights, downlights, ceiling lights and industrial lighting systems.