Electrical issues have a way of cropping up all of a sudden. At that point of time, the only thing on your mind is that you should be able to contact an electrician who will deal with the issue without delay. If you look online, you will find that Sydney has a large number of electrical companies, big and small and you may feel that identifying a good electrician shouldn’t be much of a challenge.

This could be no further from the truth. There’s much more to zeroing-in on the right electrical contractor that than. As a matter of fact, if you aren’t too particular about who you are hiring for the job that can easily lead to a major fire break-out on your property. This is something you want to avoid under all circumstances. The very first things to take into consideration are:

It’s common knowledge that you would need an electrician to install/ replace/repair/maintain electrical systems. In our country, you are legally permitted to replace light bulbs and operate electrical appliances in just the manner they are designed to be operated. Apart from that, all electrical jobs should be handled by a certified and insured electrician and this can include:

The rule of thumb is that even if you feel a particular job is very minor and you know exactly what you’re doing, it’s important that you call an electrician. It’s vital to understand that any type of DIY electrical work can be extremely dangerous – it can result in fire, damage, injury as well as death. Here are the things you should be looking for when you are choosing an electrical contractor:

We at Allround Electrical are licensed and insured electrical contractors; we can rectify all types of electrical faults and provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Is your home struggling to keep up with the present digital age? Our ever increasing dependence on technology and all its gadgets makes ever increasing demands of the electricity in our home. Here are a few things to keep in mind when you consider an electric service panel upgrade in Fairfax, VA.

Musical Outlets

Do you find yourself having to unplug one item in order to use another? If you’ve purchased or inherited a home that’s more than ten years old, this is probably the case. Older homes weren’t built to withstand cell phones, tablets, laptops, desktops and all the digital things we take for granted now.

Dueling Surge Protectors