Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

What are electric bikes? A lot of people may be surprised at the mere fact that electric bikes even exist, but their history goes back even to the late 1890s. Different U.S. patents dating back to the 1890s actually mention the existence of said bikes! Sometimes also referred to as e-bikes, this special bicycle is actually a bicycle that features an electric motor that is normally utilized to power up an ordinary vehicle. These kinds of bicycles actually rely on a rechargeable battery and can even attain speeds as high as 15 miles per hour or 20 miles per hour. Of course, this all depends upon the specific laws of the country in which these kinds of bicycles are sold!

The good thing about these electric bikes is that they can be utilized as an alternative form of transportation to cars and even normal bikes! Believe it or not, these kinds of bicycles are actually quite good for people who are suffering from heart problems, but still are told to get more exercise into their lives. According to an entry on Wikipedia, these types of bicycles require a lot less cardiac exertion, which is good news to people who already have established heart problems.

When it comes to the cost issues of an electric bike versus the costs behind cars, you can bet your bottom dollar that choosing these types of bikes is more cost-effective than buying or maintaining a car. Let’s look at just one aspect of this consideration, which is in regard to the price of gas to operate either kind of vehicle. With electric bikes being limited to just 20 miles per hour according to American law, you do not even need to pay for a special registration, insurance or license, unlike a car! Further, according to the website called Eco Wheelz, it takes just about 10 cents to charge a battery for this bicycle! With gas prices in the U.S. hovering near $4 already, and with most cars getting just 25 miles on the gallon, it is obviously a lot more expensive to buy, own and maintain your car.

On the issue of safety, electric bikes have a little bit farther to go before they can be considered totally safe. Take for instance China, which is the world’s biggest market for these kinds of bicycles. There is road traffic safety concern in general over these kinds of bikes because they oftentimes use the same lanes as slower-moving normal bicycles and even pedestrians.

As you can see, electric bikes are an alternative to cars and regular bicycles. They are allowed in the U.S. and are more cost-effective than cars, although there may well be some safety concerns attached to this type of bicycle.

As a local Dallas and Plano electrician. wants to make it a little easier for local residents and businesses to prepare for power outages that can come with higher stress on the power grid during extreme weather. With temperatures well into triple digits, and yesterday’s announcement by ERCOT of an Energy Emergency Level 1 Power Watch, power supplies are straining to keep up. It is very important to ensure that you are prepared for a situation where you may find yourself without electricity.

Here are the top ten items to keep in mind when preparing for a power outage in your area.