While some might think of a garage as simply another room where you park your car and use as storage, it’s still part of your home and could be the cause of a higher energy bill. Helping make your garage more energy efficient will in turn lead to higher energy savings for your home.

Find out how to keep your garage energy efficient while saving money with our simple tips.

By insulating your garage and garage doors you can help keep the use of your HVAC down during the cold months. Garage doors tend to have several openings from which cold air can go through, causing the HVAC system to kick in more frequently than usual.

Turning down the temperature of your water heater to 120° F helps keep the water comfortably warm while reducing on unneeded energy waste. Lowering down the heat while on vacation also results in lower energy consumption.

Other tips for your water heater include purchasing a unit with a high Energy Factor (EF) rating that is more energy efficient, and routinely draining a bucket of water to help remove sediment that could cause issues.

Using warm or cold water instead of hot water to wash your clothes helps save energy up to $50 per year. Consider also investing in a front-loading washing machine, which use less water on average than traditional models.

When using the dryer, make sure to add a dry towel to help reduce the drying time. Keep yourself from running an additional cycle by not overloading your washer and dryer, which will cause your clothes to not be cleaned properly, and take significantly longer to dry. Cleaning the lint screen after every load helps keep the exhaust clean while reducing drying time and energy usage.

With the rise of energy efficient electric cars comes the need to keep a steady supply of fuel at home. Electric vehicle charging stations are a good choice, but oftentimes a faulty installation could lead to more serious problems down the line if installed incorrectly.

Having a professional and qualified electrician install EV chargers helps ensure that the correct voltage is being used and that the amperage will work best for your needs. They will also help you choose the correct model so that the installation location fits the length of the charging cable.

Garages are the perfect place for a handyman’s work station or home office and as a result, many might have power tools and various other electronics connected at all times.

As we mentioned in our energy guide for the living room, vampire appliances could result in wasted energy and time on standby mode. So if you’re using power tools or any other electronics, make sure to unplug them after use to help keep the costs down.

Light bulbs usually consume more electricity than an LED so replacing them is a wise choice. LEDs not only help reduce your carbon footprint, but they also need to be replaced less frequently and consume less energy making them a perfect energy efficient option.

Often times, the lights will be left on as you forget and move to other rooms in your home so consider investing in a light timer which can automatically turn the light off after a set amount of time.

While having a spare refrigerator or freezer in your garage might be a good idea for keeping spare food safe, it’s often wiser to get rid of it or replace it with a more energy efficient model.

If you’re not ready to get rid of the appliance, at least unplug it to help keep unneeded energy from being wasted.

A bath fan is one of those things we all take for granted. We assume every house has one in each bathroom. Unfortunately, this is not always the case. While you may simply chalk it up to a little something extra that isn’t really needed, it really is a necessity. A bath fan is a must have if you want to preserve the quality of the walls and flooring in your home. If you are wondering why, listen to your electrician. Beverly Hills homeowners can count on the experts at The Electric Connection to steer them in the right direction when it comes to taking care of electrical needs.

A bath fan pulls moisture out of the air that is generated by hot showers. You have probably seen the condensation on your mirror after a shower and maybe you have noticed your sink and countertops are damp. A quick wipe with a towel takes care of the obvious moisture, but what about the moisture seeping into your walls and floorboards?

This is a prime environment for mold. You have heard of the dangers of mold and how harmful it can be to your health. Not to mention, mold remediation services can be extremely costly and you may even be displaced from your home for several days.

A bath fan is a simple, inexpensive method of controlling the amount of moisture in your bathroom. Because it involves electrical wiring, you will want to hire an electrician. Beverly Hills homeowners would never trust one of their biggest investments to just anybody, and this is why you want a professional who knows how to safely and securely install a bath fan. Homeowners will have the option of choosing the right fan and will be pleased with the wide variety of fans available on the market today. If you are ready to add or replace an existing fan, give us a call today at The Electric Connection.

Smoke detectors (smoke alarms) are one of the most important safety devices in your home. If your home has well-maintained smoke detectors, the chances of your family surviving a house fire are greatly increased. From 2003 to 2006, 66% of fatalities due to house fires occurred in homes without working detectors (National Fire Protection Association).

Most homes have smoke detectors, but many times they are not located properly or are not working due to lack of maintenance. Of course, a smoke detector in the wrong location or one that no longer works because it has a dead battery provides no protection for your family. The Electric Connection, a fully licensed, bonded and insured electrician in Burbank CA, knows the most current code rules for smoke detector placement and they can install or replace your smoke detectors for you.

Maximizing Protection

Your family will have maximum protection if:

Can I install them myself or should I have my Burbank electrician install my smoke detectors?

You can purchase battery-operated smoke detectors from a hardware store and install them yourself. (If you decide to install your own smoke detectors, check your local building code for placing them.) For detectors that are wired into your electrical system, the U.S. Fire Administration recommends that detectors be installed by a qualified electrician. The Electric Connection, a local electrician in Burbank, can often schedule an electrical service call appointment for the following day.

Are they expensive?

Depending on the type of detector you decide on, they can run from $10-$40 each, not including installation costs. You can often get a ballpark price over the phone for installation pricing from a Burbank electrician.

How should they be maintained?

Most detectors start “chirping” when batteries have run down. In addition, the U.S. Fire Administration recommends testing them monthly. They recommend:

Are your detectors properly positioned?

The guidelines given here can help you determine if existing smoke detectors are properly positioned. If you are going to install battery-operated ones yourself, follow the placement requirements of your local building code. In general, it’s recommended that you have a smoke detector:

Within these general guidelines, detectors should be placed where smoke can be readily detected — high up on walls or on the ceiling (smoke rises) and at a distance from windows, fans, and vents that might blow smoke away from the detector.

If the smoke detector is wired into your electrical system, it should not be on a circuit that can be turned off with a wall switch. It’s always best to consult with a licensed Burbank electrician when it comes to hard wire some detector installations.

If a smoke detector is placed too close to a kitchen stove or shower, it can be triggered unnecessarily by steam or normal cooking smoke. Better to move it to a different location that also meets general safety guidelines and your local building code.

If you are uncertain about placement or need help with installation or battery replacement, call a qualified electrician in Burbank, such as The Electric Connection or visit our website.

Many Pittsburgh natives fondly recall the weather beacon atop the Gulf Tower with its flashing neon lights that indicated the weather forecast. The security guard in the building’s lobby would read the weather report in the local paper and switch the lights to red or blue, solid or blinking.

However, this six story pyramid’s neon display used as much energy as 24 homes, and during the energy crisis in the ‘70s, Gulf Oil decided to turn off the lights. When the crisis was over, the lights no longer worked.

Fast-forward a few decades: the building’s owners, inspired by the Empire State Building’s LED displays, decided to reignite the much adored landmark. With new LED technology, the award-winning lighting duo Chris Popowich and Cindy Limauro have enhanced the tower’s former glory with 730 foot-long strips of LEDs that can dazzle in a rainbow of colors.

The newly named KDKA-TV Weather Beacon usually provides a detailed weather display of Pittsburgh’s current conditions including temperature, precipitation, humidity, and wind speed: