When you want a relaxing evening after a long day at the office, or when you want to throw a party for your closest friends and family family members, we hope that you’re able to look to your home as a place of safety, comfort, and peace of mind. If you’ve been experiencing electrical troubles, such as tripping breakers, outlets that emit a foul odor, defective lights, or frayed wiring, it’s difficult to love where you live. You can restore the affection you once had for your home by enlisting the help of a licensed professional to complete an electrical safety inspection.

Is it driving you crazy to charge all of your devices? Smart phones, tablets, digital music players, digital cameras and more have made many facets of life more convenient, but they come with their own complications and annoyances as well. For one thing, all those devices need their batteries charged, sometimes every day, and it can be quite a pain to keep track of all the cords and adapters. Fortunately, with a little DIY talent or the help of an electrician, you can install combo outlets in your walls with built-in USB ports, making it easier to charge your gadgets wherever you’re at home.

Out with the Old, in with the New

To install a USB outlet, you need to buy an outlet kit from your local hardware store or from an online retailer. You can find various options with two or four USB ports combined with one or two traditional power outlets. If you are comfortable doing simple electrical work, you can probably install the outlet yourself; otherwise, an electrician can do the work and have you up and running quickly.

If you are a DIYer, the first step is to turn off the power to the circuit you are working with. After you turn the switch off at the circuit breaker, make sure you test the outlet with a light or other appliance before you proceed to make sure it doesn't have any current. Next, you'll need to remove the old outlet with a screwdriver and disconnect the wiring. Then, simply connect your new outlet, carefully following the manufacturer instructions. It's extremely important that you reconnect all the wires properly, including the ground wire.

Convenience and Simplicity for Your Devices

Once the new outlet is wired up and screwed into the wall, flip the circuit back on and you should be good to go. Give the new USB outlet a test drive with your phone or tablet, and then sit back and enjoy the convenience and simplicity. Unfortunately, you still need to have an appropriate cord around to take advantage of the USB outlet, but at least you can do away with the cumbersome adapter. That frees up space, since adapters are often so bulky that they cover multiple outlets even though they only use one. Plus, the built-in USB ports limit the electrical current to whatever amount is required to charge the device.

You don't need combo outlets everywhere you have a plug, but if you put them in highly-traveled areas like the kitchen, office and bedroom, you will have easy access to their charging power whenever you need it. Those readers who enjoy perusing their phones in the bathroom can even put a combo outlet by the sink – just make sure you don't get water on your device!

Recharge Your Life with the Help of an Electrician

If you need any help installing or upgrading outlets in your home, call an expert electrician today.

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.