5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

There are times when you plug in the toaster or try and run the vacuum cleaner and it won’t work right. You probably unplug it and try it again and it works fine. You think nothing of it and assume it was a fluke—until it happens again with another appliance with the same outlet. Now, you have to wonder, is it an electrical problem or is it really just a fluke? These situations may appear to be no big deal on the surface, but they really are and can indicate there is something going on behind the outlet cover. Something like frayed or loose wires that could create a spark and start a fire that burns slowly and becomes a serious problem before you know it. You need an electrician in Beverly Hills to investigate these little problems before they become big ones that threaten your home and your safety. The team at The Electric Connection is here to help.

Outlets that work intermittently are just one of the symptoms of a serious electrical problem. Lights that flicker or do not turn on even when a new bulb is installed are another sign of electrical trouble. The light fixture may have wiring that has deteriorated or the wiring in the ceiling could be bad. Because you can’t tell simply be looking at the light or the light switch, you need to call an electrician familiar with Beverly Hills electrical needs.

The electrician will do an inspection and thoroughly investigate the problem. If it is a wiring issue to a single outlet or light fixture, it is a fairly easy fix. If you have a breaker that trips frequently, let an electrician know. This is another sign of a problem. Never leave little electrical problems unchecked. They can quickly become serious concerns. Give The Electric Connection a call today and schedule your electric inspection.

When a fire breaks-out, most people just assume that it’s been caused by some inflammable substance. While that might be the case, it’s important to keep in mind that fires can also be caused by electricity. The one thing to keep in mind is that an electrical fire can’t be doused by water. Faulty or old electrical installations can lead to a fire and cause untold damage to life and property.

There are times when the electrical equipment or appliances in an electrical system can be the cause of overheating & overload, which can end up causing a fire. So, exactly what is it that causes an electrical fire? There are three main reasons, let’s take a detailed look at what these are and what can be done to prevent this from occurring:

Some properties have wiring that is decades old and electrical wires do tend to deteriorate with age. In fact, if the wiring in your house is over 15 years old, the recommendation is that you should get the entire property rewired. Older wiring wasn’t designed to bear the electricity load that current-day appliances demand. At times the electrical contractor might have cut corners and installed wiring of poor quality and this can lead to a similar problem, both of which can result in fires.

Arcing is quite a common problem with electrical wiring. As mentioned earlier, most homes have a range of heavy-duty electrical appliances. When you run a number of these appliances simultaneously in your home, it results in overloading and overheating of the wires. If the wiring is old, it will get heated up which will cause the insulation around it to melt – this results in arcing and an electrical fire may erupt too.

There are times when electrical wires are just too close to an external heat source which causes the outer insulating sheath of the wiring to melt. If this goes unnoticed, it can result in an arcing and fire.

Regardless of what has caused the electrical fire, if you attempt to contain it by pouring water on it that will escalate the issue. Water doesn’t have any effect on electrical fires; in fact, if you try to use water to douse an electrical fire, you can get electrocuted. What you need to deal with an electrical fire is a Class C fire extinguisher.

This type of extinguisher has dry chemicals that help contain the fire. Depending on how severe the fire is, it might be possible to completely bring it under control using a Class C fire extinguisher. If you don’t have this extinguisher, baking soda might help to some extent.

In case there is a break-out of fire on your property, the first thing you should do is switch off the power-mains; this is effective in containing the fire. Ideally every home and commercial establishment should have a Class C fire extinguisher or two, based on the size of the property and that should be used in case of any fire in the electrical wiring. An electrical fire is an electrical emergency and it’s crucial that you keep the number of a local, reliable electrician handy.

Never try to fix any electrical issues on your own. That can only lead to more complications and will compromise the safety of your property. We at Allround Electrical can rectify all types of electrical faults and we provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263

The electrical installations in our home are something we take for granted, until the time some problem arises; that’s when we realise exactly how dependent we are on electricity on a daily basis. And when something goes wrong, you start looking for an electrical company that will respond promptly and solve the problem quickly.

You will find a multitude of electrical companies listed online. However, identifying one that is credible and provides quick, efficient and cost-effective services can pose a challenge. It’s important that you be prudent while hiring an electrical contractor.

The one way to be sure you are dealing with expert professionals is to do a bit of groundwork. This means you won’t have to struggle to look for a reliable electrician in case an electrical emergency arises. Here are a few tips that will help you choose a trusted and professional electrician:

This is a very important aspect you should be taking into account. The company you hire should be local to your area. You can never predict when an electrical emergency would arise, and you need to be sure that the electrician will be able to reach your location as quickly as possible.

There are a number one-man electrical businesses in Sydney and many of these electricians are experienced and highly-skilled too. However, if they are already handling some job when you call, they won’t be able to attend to your requirement quickly. The one way to avoid this kind of a situation is to hire the services of a larger company. These companies deploy their vehicles to different locations within their service area.

When you call them, they promptly contact one of their electricians that are in the vicinity of your location and send them over to attend to your request. Even as you look for a contractor, keep in view that a very large company may not be able to provide you personalised services and customised solutions. It’s important to choose a company that would be able to cater to your specific needs.

There are a number of different electrical services you may need, ranging from something as simple as getting a fan installed to more complex jobs like complete rewiring upgrades on your property. Only experienced and well-trained professionals would be able to handle all these jobs with expertise. The company you contact should have experienced electricians on their team and should invest in upgrade training for them; that’s the one way the electricians would be able to keep their skills sharp.

Look for a company that’s professional and efficient. Electrical problems have a way of throwing things out of gear. The electrician that comes to fix it should be able to quickly identify what the problem is and fix it expertly and quickly. They should work in an unobtrusive manner and focus on reducing the downtime caused by the electrical issue.

Only a credible and well-established company will make efforts to maintain complete transparency in their dealings with their clients. They should provide a detailed quote and look to provide you value for money. Only a company that’s confident of their workmanship and quality of services will provide guarantees for their work.

We are a reputed and experienced company that is focused on providing high-quality solutions at competitive pricing. For any information about our services, feel free to call Allround Electrical at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263