In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

Twice a year (Spring and Fall), the High Point Market promises an array of new home furnishings, wall decor, lamps and lighting that define future trends and excite the imagination.  This year’s fall showing (October 18-23) did not disappoint!  Take a look at bright new styles, just in time for the holiday season.

More than 200 showrooms, filled with outstanding decor and illumination, offered a truly spectacular preview into the latest trends for the upcoming season.  Must-see items include modern table lamps from Van Teal, designer chandeliers from Crystorama and exclusive ceiling fixtures and outdoor lanterns “Made-in-America” from Framburg Lighting.

Van Teal’s “Burst” Collection

The “Burst” Collection from Van Teal features a must-see Gold Leaf and Artisteel finish.  See the entire collection from table lamps to island lights at 1800lighting.com.

Framburg Lighting’s “Brocatto” Collection

“Brocatto” from Framburg features lace and Italian glass for an exquisite presentation and dazzling illuminating effects.

Dynamic Collections from Libby Langdon Lighting for Crystorama

• The “Jennings” Collection

The “Jennings” collection features an artistic geometric in a Polished Nickel finish over White linen shades.

• The “Sylvan” Collection

The “Sylvan” collection features elegant chandeliers with a free-flowing design in Polished Nickel with linen shades.

Coming soon to 1800lighting.com…

“Timeless” table lamp from Currey and Company

Stay-tuned for more highlights from High Point coming soon to 1800lighting.com. Classic and modern table lamps, designer chandeliers and lighting fixtures made exclusively in America are this year’s big winners!

The baseball season has started, NASCAR has revved up for the summer and football is right around the corner. All these sports, at one time, could only be enjoyed during the day. Mr. Electric®, a company committed to powering tomorrow, looked at how electricity and lights changed sports forever.

On the night of September 28, 1892, the game of football was changed forever when Wyoming Seminary played Mansfield State Normal School in the first-ever night game. The game lasted 20 minutes, consisted of a total of ten plays and ended with neither team scoring. The game ended early due to several players getting hurt by running into light poles caused by the insufficient lighting system. The first night game West of the Mississippi was played in Kansas by the now, Wichita State, and Sterling College in 1905. With upgraded lighting systems many games are now played at night. On September 28, 1992, Monday Night Football celebrated “100 years under the lights” in a game featuring the Kansas City Chiefs and St. Louis Rams.

Baseball was behind football when it came to playing at night. Though teams had played at night since the 1880s, many teams did not make it common practice until many years later. The first ever Major League Baseball game to be played at night took place on May 24, 1935, in Cincinnati when the Cincinnati Reds played the Philadelphia Phillies. The Chicago Cubs were the last Major League Baseball team to finally host a game at night in their home stadium of Wrigley Field. The game took place on August 9, 1988. The World Series had its first night game in 1977. Now, every Major League Baseball stadium has lights and night games are a common occurrence.

Bristol Motor Speedway was the first NASCAR track to have lights installed for night races in 1992. In order for night racing to take place in NASCAR lights had to be designed that would not blind the drivers as they raced around the track. Bristol was one of the first tracks to have night racing. Since 1992, many tracks have added lights for night racing. Some of the most popular night races take place at Kansas City, Richmond, Charlotte and Bristol Speedways. None of these sports would be where they are today without the advent of electricity and intelligently designed lighting systems.

We’re thrilled to offer new LED Skylights! Designed for dental office lighting, hospital lighting, classroom lighting, waiting rooms, basements, or other applications with suspended grid ceilings, the decorative LED light panels are an innovative alternative to window skylights. They feature vivid sky designs that are printed directly on panel lenses. Using Even-Glow® technology and diffused optical lenses, these panel lights deliver smooth, flawless illumination without visible bulbs or hot spots. The 2-by-2-foot and 2-by-4-foot panels are available in dimmable and non-dimmable versions. Dimmable panels offer an alternative ceiling and wall surface-mount option in addition to suspended grid ceiling mounting.

LEDs in the panel lights are designed to last three times longer than fluorescent tube light bulbs without the notorious hum or flicker they produce. Each LED panel light has a slim aluminum alloy frame. Non-dimmable panels are equipped with a UL-Recognized constant-current driver. Dimmable panels have an internal 0-10-volt dimmable constant-current driver. Dimming can be achieved with a 0-10-volt switch or by using the light’s power-cycle feature to activate set brightness levels. The energy-efficient panel lights operate within a wide 100-277V AC range.

Sun Beams

Jet Set

Summer Sky

Balloon 1

Balloon 2