At Pezz Electrical Services LLC, safety is our number one priority. Our services include safety inspections for heating and electrical equipment alike, which becomes more and more important as winter approaches. Follow these steps to keep your home safe for the winter, and call our friendly team to learn more.

Winterize your home to prevent chilly temperatures and burst pipes. Keep heat from moving out of the home by sealing air leaks, applying weather stripping or caulking to areas around doors and windows.

Make sure heat can reach all of the pipes in your home. Keep doors open throughout the house, along with cupboards where exposed piping may be. Do not block off vents, and insulate all exposed pipes in and out of the home. Clean out roof gutters and repair any leaks in the roof long before winter picks up.

Your gas heater should vent any combustion byproducts—like carbon monoxide (CO)—safely to the outdoors. While today’s heaters have safety switches to shut down the heater in case this doesn’t happen, a safety switch could fail.

Be sure you schedule an appointment with a heating maintenance technician every year, as early in the winter or fall as possible. Keep the air filter clean and replace it monthly.

Test carbon monoxide detectors and smoke detectors monthly as well. If you do not have these devices throughout the home, now is the time to take this step to enhance safety and give you peace of mind. Replace CO detectors every 5-7 years and smoke detectors every 10 years. Change the batteries every 6 months.

If your power went out in the middle of a cold winter day or night, would you have a backup plan? Elderly family members and children often cannot get by without heat, and it could be dangerous. We recommend a whole-house generator, or a portable model at the very least, or that you have a backup plan and a place to stay, just in case.

Electricity is a modern marvel that most people don't really put much thought into -- unless it isn't working properly. You flip a switch, twist a knob or insert a plug into an outlet, and -- presto! -- the room is lit up, your television springs to life or your phone is charging. As wonderful as electricity is, it can also be dangerous. The following safety tips are ones that you should always keep in mind to stay safe from the inherent dangers of electricity. 

1. Spring for an inspection

While this tip is especially important for older homes, even newer homes could have faulty equipment inadvertently installed in them that could increase the potential for danger. That being said, if your home is older, chances are that it wasn't built to handle the increased reliance on electricity that is a given these days. An electrical inspection will pinpoint those potentially hazardous areas and advise you on how to address them. 

2. Buy a fire extinguisher

If your home catches fires due to an electrical issue, the only safe way to put it out is to use a fire extinguisher that is designed to retard chemical fires. If you attempt to put the fire out with water -- which might be your first instinct -- you will only make things worse. This is because water conducts electricity. Make sure that you keep fire extinguishers on every level of your home. Store them in a place that is easy to reach. Make sure to inspect them regularly and replace them as needed. Stay up to date on how to use it correctly. 

3. Get to know your outlets

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.