If you are working with electricity, it is important to know how to safely install an organized electric wiring layout.  Fires and accidents can be caused by faulty electric wiring layouts, so it’s important to be able to recognize potential hazards and avoid them whenever possible.

Although this job may be The electric wiring layout for your home will vary according to what room you are doing the wiring for. In any case, it’s a good idea to draw a diagram of the layout first. The diagram will help you determine what lighting or appliances are needed, where they will be located and what sort of outlets will be necessary for each item.

Next you should determine which tools and Because it is so important to have your electric wiring layout installed safely, here are a few tips you should be aware of during the installation process:

For some, flickering lights are an annoyance and can be a distraction. Others don’t notice the inconsistency in the lights. But, that fluctuation in light can signal problems in the circuitry or light fixtures in one’s home. Depending on the source of the problem, it could lead to serious safety issues in a home.

All lights flicker to some extent, based on the amount of power that is coming into the lines in your home.  If your lights flash or flicker regularly, it’s often a sign that there’s a problem – either in connection or power use. Situational flickering – like when an air conditioner starts – is a sign that there’s an issue with power supply. Simply put, the dip of the lights when the AC unit starts up occurs because the AC pulls the available electricity supply from the light. It’s usually temporary. It may also be a sign that the outdoor AC unit isn’t wired for maximum amperage. If the flickering lights aren’t related to a large appliance powering up and running, it’s a sign that there are issues – home may be brighter and more comfortable.

Compact Fluorescent Lights: Think of a normal florescent light tube, but curled up to fit the shape of a standard light bulb. The best CFLs last 10 times as long and use a quarter of the energy of old incandescent bulbs, according to the federal Department of Energy. The drawbacks of CFLs are that they can be damaged if they are turned on and off too frequently, and they don't work well in the cold so their outdoor utility is limited.

Light Emitting Diodes: Traditionally, LEDs were for power lights on appliances and other limited uses, but advances in technology have greatly expanded their utility, and there are now numerous options for LED light bulbs available to consumers. LEDs are a fantastic value: they use only about 25 percent of the energy of standard light bulbs and can last up to 25 times as long.

Halogen Incandescents: Halogen bulbs are a twist on the old-fashioned incandescent bulbs. They function in essentially the same manner, except the glass globe is filled with halogen gas, which amplifies the light and therefore decreases the amount of electricity needed, hiking its efficiency rating. They aren't as stingy with energy as CFL or LED lights, but work well for outdoor spotlighting.

While modern bulbs cost more to buy than the incandescents you were accustomed to, their increased longevity and efficiency actually lead to big savings in the long run.

What’s more important than reliable access to electricity? Safe and reliable access to electricity! We use tools and appliances every day. Heck every hour. And in some instances, every minute. But generally speaking, we don’t really pay much mind to how safe we’re being with it. But you should. Accidents happen all the time (and if you like statistics, boy we’ve got ‘em right here!), and whether you think it could happen to you or not, the fact of the matter is we put ourselves at risk all the time.

This is why it is outright critical that we ensure we’re taking all of the steps we can to protect ourselves, our homes, and our loved ones. Luckily, safety isn’t all that hard, and really takes a minimal time investment. Here at Kolb Electric, your safety is the top priority to our Alexandria electricians. So take a moment to read up! You might learn something new.

Regarding Electrical Supply

First off, to use any appliance safely, you should always keep in mind the right places to use them relative to your home’s safe supply. We’re talking, of course, about dedicated circuits. We’ve spoken of them many times, but it’s important because ensuring the proper appliances get the proper setup is key to operating them safely. Appliances that should be on dedicated circuits include:

Also, if your appliance is going to be near water sources (kitchen/bathroom appliances), be sure they are plugged into a GFCI outlet. Don’t have GFCI outlets? Looks like it’s time for some installation!

Using Power Strips for Your Appliances

Don’t “daisy-chain”, be sure you’re using indoor for indoor, outdoor for outdoor, never cover your cords (generates dangerous heat), and don’t exceed the safe capacity. Also never use power strips or extension cords to power heaters or other high-wattage appliances. They weren’t designed to handle that much power, and they may overheat/catch on fire.

General Appliance Safety Tips from Our Alexandria Electricians

Rules of thumb that promote safety are a great idea, and our Alexandria electricians are here to give you the rundown!

Need the services of a certified electrician to beef up your home safety? From outlet installation to wire repair, our experts have you covered! Contact Kolb to learn about our services, or to set your appointment today!

When it comes to DIY jobs, electrical wiring is one thing that you should avoid. Most wiring or rewiring jobs are incredibly complex, and require the expertise of trained and licensed professional electricians, such as the members of our staff. You also don’t want to trust this job to an amateur or a general “handyman” as they most likely lack the necessary training to do the job right.

One of the most popular rewiring jobs people choose to proceed with is finishing their basement, which requires a good amount of rewiring throughout. Keep reading to learn more about what this type of job requires, and why you should only trust the professionals to complete it.

Even the smallest drip coming through your below-grade walls can create a problem. You’ll want to have the outside checked to ensure that the ground is graded away from your foundation, and also will want to check for cracks in your foundation walls and have that damage repaired if necessary.

Chances are, you don’t know the local building codes in your area. Many times, you’ll need to get building permits to make any electrical changes to this room of your home, as that room may need to be inspected before the job begins. Our electricians are aware of these rules and will take the necessary steps to ensure the job is done correctly.

A drop, or suspended, ceiling is one that is lower than the natural ceiling of your basement. This allows you to conceal any new plumbing that is put in, as well as electrical components such as wires. The good news is, there are plenty of attractive options for these types of ceilings. This also allows you to give your lighting a recess, which allows you more space for light fixtures.

As tempting as it may be to finish your entire basement, keeping the space housing your HVAC units and water heater clear, open, and unfinished is a good idea. That’s because these spaces have specific code requirements, plus your service professionals will need access for maintenance and repairs.