Were you the lucky recipient of a fabulous hot tub this holiday season? If so, you are probably eager to have it set up as soon as possible. It may be the middle of winter, but the California weather makes it the perfect time of year to enjoy the hot water while enjoying the brisk night air after a long day. It is a relaxing experience and you are likely eager to get to it. You will need to call a Burbank electrician to schedule your install appointment. The friendly team at The Electric Connection is on hand and ready to take your call.

It is imperative you do not try and install the hot tub by yourself. There are some technical things that must be done in order to install the hot tub properly. The first order of business is to have an electrician come out and check your electric panel to determine if you have the space needed to install an additional 240-volt outlet. That is what your hot tub will need to operate. If you don’t have the available space in your current electric panel for the additional breaker, you will need an electric panel upgrade. When the electrician does the initial inspection, he or she will let you know what you will need.

The hot tub will need to be hard-wired to your home’s main electric by an electrician. Burbank residents will also need to check with their county to determine what permits are needed for a hot tub installation. Depending on where you plan on placing the hot tub, the wiring from the hot tub to the home will need to buried. Keep this in mind as you decide where you want your hot tub. If you are ready to get your new hot tub up and running, give The Electric Connection a call today.

Florida residents, it happens to all of us more often than we’d like. A storm, hurricane, or other catastrophe causes our lights to flicker and the power to go out. Power loss doesn’t just affect the lights—food can begin to spoil in your refrigerator and freezer, cell phone batteries die and are unable to be recharged, furnaces can’t keep your home and your family warm, and hot water to bathe, cook, and clean becomes limited. The list goes on and on. The next time a storm knocks out your power—again—you may find yourself thinking about investing in a standby generator to help you weather the storm.

There are many benefits of installing a standby generator in your Tampa or St. Petersburg home. Unlike a portable backup generator, a standby generator is doing just that—standing by, awaiting its turn to provide power to you and your family. Differences between the two power generators include:

As lighting technology has advanced, one of the clear front-runners in long lasting, energy efficient lighting is the LED light. With uses ranging from interior lighting to landscape lighting, there are many reasons why you should switch your home lighting over to LED. Because LEDs are being manufactured in many of the same form factors that you are familiar with, you have the option of calling a Burbank electrician such as The Electric Connection to help you switch out the majority of them if you feel it’s too overwhelming of a job, or you could take it on by yourself. If your lighting project is more extensive than changing out a few light bulbs, and you plan on installing recessed lighting or new fixtures, you should definitely look into having the work done by a professional electrician in Burbank.

Benefits of LED Lights

The most publicized benefit of using LED lights for most lighting applications is the extremely low energy usage and long lifespan. This benefit is seen best when compared by an electrician in Burbank CA with other light bulb technologies. A standard incandescent bulb has a lifespan of around 1,000 hours, a compact fluorescent has a lifespan of around 8,000 hours and an LED has a lifespan of nearly 30,000 hours. This is a huge increase, meaning that you will have to change your bulbs much less frequently than before. Furthermore, LED light bulbs are mercury free, unlike compact fluorescents.

In regards to energy efficiency, LEDs are also way ahead of the pack. As a result of the low energy required to run an LED bulb, there is also much less heat required. This leads to lights that are cool to the touch, making them much safer for many applications. When asked about power consumption, an electrician in Burbank will tell you that LED bulbs use much less than any other currently on the market. For example, a 40-watt incandescent bulb burns just as bright as an 8-12 watt compact fluorescent or a 4-5 watt LED. By switching from incandescent to LED, you’re only using about 10% of your previous energy. This can make a huge difference, considering that lighting can make up almost 25% of any home energy budget!

Choosing an LED

When choosing an LED, there are many factors to be taken into consideration. If your home lighting project is extensive, think about doing a quick Internet search for electrician Burbank and then find one that you can trust such as The Electric Connection. Working with an electrical contractor on this type of project is very much like having ceiling fans installed, outlets replaced, bath fans installed or having new switches or lighting dimmers installed. A licensed Burbank Electrician such as The Electric Connection will be able to explain everything that needs to be done in order for your custom lighting job to be done well. If you are just looking to replace some of the bulbs in fixtures around your home, there are just be a few things that you should know.

To make things simple, most packages rate their light bulbs with both actual watts, and watts relative to an incandescent. This means that if you are using a 45-watt incandescent, you should be able to find a 3W LED with packaging that lets you know that they are equivalent. If these comparisons are not listed on the box, there should also be a lumen rating. If necessary, you can compare the lumens between types of light bulbs. When choosing light bulbs for your fixtures, you will most likely be shopping for diffused bulbs. These bulbs look very similar to a standard fluorescent bulb, and help to diffuse the light. This gives the light a more natural feel. Other types of lights include outdoor landscape lights, such as floods and interior spotlights for more focused light concentration. Regardless of what type of lighting you choose, your licensed electrician Burbank CA can always help you with any questions that you might have. Enjoy your new lighting!

Visit our company profile.

How to Choose the Right Sized Chandelier for Your Home

Chandeliers are designed to float in a room as an important part of the decor. Too large and this fixture will overpower the space. Too small and it will look out of place as an afterthought.

“Placing a chandelier that is too small in a space is likely the biggest mistake because it’s very noticeable,” says Joe Rey-Barreau, educational consultant for the American Lighting Association (ALA) and assistant professor of interior design at the University of Kentucky. “Great designers, therefore, tend to make their decisions on fixtures that may appear slightly larger than might be appropriate. It’s generally always best to make the mistake on a fixture being too big than too small.”

Capitol Lighting offers a wide range of modern chandeliers to crystal and Italian chandelier styles to choose from.  Whether you are purchasing an Italian chandelier or a modern chandelier, size matters! To make sure your chandelier is the right size for the room in which it will hang, consider the following questions:

1. How high is your ceiling? Taller ceilings demand larger chandeliers. 4. What is the form and design of the chandelier? Light, airy fixtures tend to look larger.

To have all of your chandelier questions answered, visit one of our seven Capitol Lighting showrooms today!  

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.