The question of whether or not to repair or replace a furnace can be a challenging one. However, there are some key factors that can help you decide which is best for you and your home. One thing to keep in mind is that heating system replacement is a great opportunity to increase your energy efficiency and comfort. Should you decide to replace your furnace in Brighton, make sure that you hire trained professionals to perform the installation. The experts at FB Electrical Services can install both electric and gas furnaces, so call us today!

Reasons to Consider Replacement

Here are some reasons why it may be better to replace than continue to repair your current furnace:

Constant Repairs

If your furnace needed a lot of repairs last winter, and you are looking at more repairs this winter, it may be time to consider replacement. Nursing an ailing furnace along can add up quickly, sometimes even up to the cost of a new furnace. You may need to determine where your money is better spent.

Rust/Corrosion

Furnaces do not use water in any way, so if your unit has considerable rust and corrosion on it, it may need to be replaced. If rust and/or corrosion is localized, it may be repairable, but if the corrosion is significant, it can’t be repaired. Excess corrosion can be dangerous in gas furnaces because cracks and holes can potentially leak toxic fumes, which are very dangerous to your household.

Age

Age always plays a role in whether or not it’s time for replacement, and for good reasons. Aging systems can be challenged to effectively and reliably heat your home, and often do not have good energy efficiency. The average lifespan of a gas furnace is 15-20 years; for electric furnaces, it’s 20-30 years. If your furnace is at or over the average lifespan, it may be time to consider replacement.

Your furnace should be reliable, energy efficient and provide the Call FB Electrical Services today and schedule an appointment for your furnace with one of our heating specialists.

Do me a favor and imagine that you are in need of suggestions for a Fourth of July party. You head to via Wikipedia

Of course, I’m not talking about snap pops, black cats, m-80s, or even those cool little paper cars that gush sparks, travel four feet, and then burn to death in a microblaze reminiscent of a 1970s action film.

I am talking about the ones that explode up there, the ones you have to tilt your head back to see. That the fireworks explode in the night sky is important because the very act of looking up immediately takes you out of the mundanity that the rest of the holiday will surely deliver – the planning, the decorating, the complications. No more overflowing trashcan with wing sauce-smeared cocktail napkins. No more ordinary stuff.

At the heart of the Fourth of July is a spirit of independence that is, actually, a big deal. When your eyes are on what’s going on at ground level, it can be hard to realize how big a deal ideas like independence and sacrifice are. Once your attention is arrested by the spectacle of fireworks happening up there in the sky, you’re taken out of the everyday and able to reflect on these things, which is important, I think.

2. They are glorious.

“And the rockets’ red glare/ The bombs bursting in air,” goes the song. Did you know that the word “rocket,” in the sense of the combustion-fueled projectile, dates all the way back to 1566? The Oxford English Dictionary notes that rockets have historically been “used for signalling, in maritime rescue, for entertainment, and as a weapon.” Fireworks symbolize communication, violence, and entertainment: A strangely fitting mix for the complex human heart.

The red glare of the rockets in “The Star-Spangled Banner” refers to the bombardment of Fort McHenry in the War of 1812. That the fort was not taken during the battle is indeed glorious, and fireworks are a reminder of the fortitude of the people who fought and suffered to keep America independent in 1776 and again in 1812. Boom. (Literally: boom!)

3. They are beautiful.

So, those are my three reasons that fireworks are the most important part of any holiday festivity: They happen above you; they are glorious; and they are beautiful. I think these are pretty good reasons for making sure you see some fireworks this Fourth of July.

Take a moment out of the hectic festivities to reflect on the spirit of rebellion, creativity, and inspiration that is involved in claiming and defending independence from parties eager to exploit the vulnerable. This is about more than just us. This unites us across time and space. Fireworks reflect the beauty of standing together for what is right, even when it hurts.

A lot of time we are asked what is the equivalent LED product to convert from Metal Halide, High Pressure Sodium or Mercury Vapor. And a lot of time, we have a product in mind that works based on past experience. But how did we come up with that product, and how did we make the original decision on what was the proper replacement?

There’s a lot of science that goes into light, color, quality, and each light had it’s own characteristics. For example, it takes less LED to replace High Pressure Sodium than it takes to replace Metal Halide. And we are talking a lot more than just lumens. We are talking about color temperature, quality of light and something called photopic / scotopic lumens.

In the world of lighting, we measure foot candles with a light meter, this is called a photopic measurement. The light meter picks up everything, including spectrum’s that are invisible to us. Now, we humans see things to, and this is called scotopic lumens. Our rods and cones read and interpret light. And it does so differently than what a light meter does. So it is not uncommon when we demo a LED Light against a HPS light or Metal Halide, we first ask “Which is brighter” before we show the light meter reading. It leaves a few people scratching their heads. Well, that’s the science of of it all, and fortunately there is some handy tables called SP ratios that allow us to take the lumens of a particular light (photopic lumens) and multiply it by the S/P ratio to get the scotopic lumens equivalent.

For example, the S/P ratio for High Pressure Sodium is 0.40. The S/P ratio for LED at 5000K is 1.8. So if you take 40,000 lumens of HPS and multiply it 0.4, the effective scotopic lumens is 16,000. To get the same amount of lumens from LED, take the 16,000 and divide it by the S/P ratio and you get 8888 lumens. So the 8888 lumens of LED is the photopic measurement, the 16,000 LED lumens is the scotopic lumens measurement. So in an nutshell, you need 8,888 lumens of LED to replace 40,000 lumens of HPS from a scotopic point of view.

Here is a handy chart of common lights and ratios for you to use.

Image via DollarStoreCrafts.com

2. Ghosts in the yard.

If you have handy lights lining a path or driveway at your house, this idea will take no time at all. You just need to collect a bunch of old plastic milk jugs with the tops cut off or white paper bags (I suggest making the decision after you get the weather report for All Hallows’ Eve). Simply draw eyes on the jugs/bags with a black marker, and slip them one by one over each Image via MarthaStewart.com

Here’s an ultra affordable Halloween lighting project, if your preferred poison is the frightening beyond of unexplained extraterrestrial phenomena. Just fill your house (or yard) full of anchored helium balloons containing green glow sticks. Add faces with traditional alien eyes or something even more creative! If you really want to play it up, you and your family could dress up like extraterrestrials and pretend the real you has been abducted.

4. Mini mummies.

If you prefer cute décor over the more macabre, a quick project to make mini mummy candles holders only requires a jar or glass cup, some white gauze, and some googly eyes. Simply scrunch up the gauze around the jar to look like the mummy’s linen wrappings. Add the eyes, and ta-da, you’ve got a precious little mummy come back to life with candlelight. They’re a crowd pleaser, trust me.