If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!

Although there are many options out there for heating your home, electric heating options have become one of the most popular solutions in many areas of the country. It is generally clean, low-maintenance heating that gives off no soot or fumes associated with combustible heat sources. It is also much less expensive to install in both existing homes and new construction. Once installed, however, electrical heating can be more expensive than gas or other heat sources.

Often in addition to a central heating system, electrical heat sources are placed in homes to provide additional heat to areas that need it. This can by done by any homeowner, and generally requires no help from an electrician unless there’s the need to have additional electrical outlets installed. While this type of heating can be somewhat efficient if used properly, unchecked small heaters can lead to excessive energy usage. To prevent this, you should only use portable heaters if they have a built-in thermostat. You can also find heaters that will turn themselves on and off according to a schedule. These advanced features are more expensive, but can be very convenient.

The various types of electric heaters include:

Storage heaters are fairly large heating units, which are mounted to a wall and must typically be installed by an electrician. These heaters are unique, in that they generate heat during off-peak times so that your electrical bills remain low. They will then release that stored heat during the day. In order for this type of heater to work efficiently, special off-peak meters must be installed and agreements with your utility company must be made. This is one of the cheapest types of electrical heating to have installed, but it can be more expensive than other central heating options.

You can find a variety of fan heaters in nearly every store that you visit during the winter. This relatively cheap, portable solution can provide fast, portable heat to a small area. This makes them ideal for providing additional heat to areas that need it. Convector heaters are bigger than fan heaters, but provide more long lasting, even heat. While they take longer to heat up, they make little to no noise, which makes them much more appealing than heaters with noisy fans. There are many options available, most of which do not require the assistance of a licensed electrician.

Under floor heating is an excellent solution in many ways. If you are building a new home, this may be an especially great option for you. Because it can be very invasive, however, under floor heating is not recommended for pre-existing structures. Heat is generated and distributed through a network of electrical heating cables that are placed under your floors.

Another home or office heating methods that’s gaining popularity today is the electric fireplace. Because they require less maintenance than traditional wood or gas fireplaces, many people are choosing this aesthetically pleasing heating option. These fires provide various levels of heat, as well as a visually pleasing fire effect. Regardless of the electrical heating solution that you choose, make sure that you look into the different options and choose the one that is best suited for your needs. If you have any doubts or questions about the use and installation of an electrical heat source, get in touch with an electrician in Los Angeles, such as The Electric Connection. We are a licensed, bonded and insured Los Angeles electrician. We will be more than happy to discuss the different types of electrical heat sources that are available, as well as what the installation requirements would be.

Click here to visit our website.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.