The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.

Have you ever thought about maximizing your backyard? The outdoors are beautiful in the spring time and you will likely want to enjoy the fresh air after a long winter. It is exciting to be outside eating, socializing and relaxing. Maybe you have seen the surge in popularity for outdoor rooms. Everything from sitting spaces to kitchens are popping up in backyards across the country. It is an excellent way to take advantage of the additional space in your backyard while enjoying the great outdoors. An electrician in Los Angeles can help you with your goal of having an outdoor room. The team at The Electric Connection can help.

You will need to have electricity in your outdoor space for any kitchen equipment, lights and fans. Outlets for your electronics are also going to be necessary. This is something your electrician will need to handle. Because the electricity will be outdoors, it is imperative safety measures are taken to ensure there are no electrical hazards. Depending on the number of outlets you need in your new space and the type of lighting that will be used, you will likely need an additional breaker installed. This will need to be evaluated by your Los Angeles electrician. An inspection of your current electric panel will be necessary to see if there is room in the panel or if you will need a panel upgrade.

The construction of an outdoor room will typically require permits and inspections by a county official. For this reason, you will need to have a certified electrician doing the work to make sure you are meeting all codes. This is typically required by your homeowner’s insurance policy as well. You can count on the qualified professionals at The Electric Company to help you make your dream of an outdoor living space a reality.

To Tampa residents, power outages are nothing new. We’ve dealt with all kinds of crazy storms and annoying weather in our time here, and it can be quite flustering if you’re not sure how to handle things. But if you’re prepared and know what to do, an outage can become little more than brief annoyance. Find out what to do during an outage with the help of the experts at Hoffman Electrical!

Flush or Semi Flush?

Flush mount and semi-flush mount lighting fixtures are integral components in lighting design, adding interest and depth while providing ambient illumination and decorative lighting effects to hallways, bedrooms and bathrooms.

The difference between a flush and semi-flush light fixture is that a flush fixture fits snugly to the ceiling, while a semi-flush fixture is suspended, leaving a small gap between the ceiling and fixture.  Opting for a flush or semi-flush light fixture is based upon taste and proportional considerations, but a few standard rules apply:

♦ Semi-flush—Somewhere in between the chandelier and standard ceiling fixture, the semi-flush fixture shines with distinction.  Taking up just the right amount of space with the power to attract desired attention, the latest semi-flush light fixtures provide superb illumination with artistic excellence.

♦  Semi-flush fixtures provide an added benefit: the small gap allows for double the illumination with indirect uplight rebounding off the ceiling and downlight emitted directly from the fixture.

♦  Flush fixtures—Most often employed in homes with standard 7-foot ceilings to provide general illumination for bedrooms, bathrooms, foyers and hallways.

Novel compositions and unique finishes are available at a variety of price points and are being featured from top lighting vendors around the world, making it easier than ever to find ceiling light fixtures in keeping with your budget and style requirements.

Corbett Lighting offers outstanding flush and semi-flush lighting designs:

-CQ33 “Cirque” Semi- Flush Fixture

-120-33 “Karma” Flushmount Fixture