Does the concept of a whole house surge protector have you scratching your head? Perhaps you’ve envisioned a super-sized power strip? Or maybe a large magical box capable of absorbing lightning bolts? Whatever your misconceptions about whole house surge protectors, we’ve got the 4-1-1 you need to help you protect your home and all its valuable appliances from those inevitable and frequent power surges.

Simply put, a whole house surge protector protects all the appliances in your home from voltage spikes, limiting excess electrical current by blocking its flow or shorting it to ground, much like a pressure relief valve. This includes surges occurring not only from lightning, but the 60-80 percent of surges that occur from within your home – typically from major appliances cycling on and off. With all of today’s electronics, you simply can’t afford not to protect your home with a whole house surge protector.

Whole house surge protectors are typically hard-wired to your electrical box. Proper installation is essential. A whole house surge protector must be properly grounded, since without proper ground even the best surge protector will be unable to perform its job.

Whole house surge protector installation by a professional typically takes about two hours. Unless you are highly skilled in electrical, it is strongly recommended to hire a professional electrician to install these devices. The electrical wiring on your service panel may be confusing, improperly installed, or house defects that could pose a danger to DIY installers not in-the-know. In addition, without proper grounding, your whole home surge protector will not function properly. For the safety of your home, your appliances, and your family, consult a professional for whole house surge protector installation.

Many components in today’s sophisticated electronic devices are sensitive to power surges. However electronics and appliances containing microprocessors -- an integral part of most of today’s appliances and technology -- are particularly sensitive to surges. Since microprocessors only function properly when they have the right voltage, a power surge can easily damage these fragile devices, affecting everything from central heating and air to kitchen appliances and entertainment technology.

Due to the prevalence of sophisticated electronics in today’s homes, every home should consider installing a whole house surge protector. In fact, everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends them. And while insurance companies don’t give discounts for surge protectors, they can easily pay for themselves in the event of a single power surge. Give your home the protection it needs with the help of Mr. Electric®. Contact Mr. Electrictoday for the fast, safe installation of this inexpensive and easy to use safety device for all of your essential electronics.  

If you live in an older home, you may notice your bathroom is missing a bath fan. While it is easy to chalk these things up to nothing more than an inconvenience, it is actually much more serious than that. Those bath fans do more than circulate the air in the small bathroom. They are an important part of your home’s construction according to an electrician. Pasadena homeowners will want to ensure the fan in each of their bathrooms is working properly and if one is not present, it is important to have one installed. The Electric Connection can take care of this for you.

Bath fans should be used anytime somebody is showering. The steam produced during a hot shower can wreak havoc on your walls, flooring and even the fixtures in the bathroom. Moisture can lead to mildew and mold. Warping of the wood in the floors and walls is also possible. A bath fan pulls the steam out of the bathroom and reduces the risk of these problems happening.

If you do not currently have a fan in a bathroom, you have plenty of options when it comes to choosing the right one for you. Of course, there are the old standards that are nothing more than a fan. But nowadays, there are plenty of options. Lights are a common addition to the fans available today along with heaters. If a person hates using the fan during a hot shower because all the warmth is pulled out of the bathroom, the heat provided by the fan will provide a warm, toasty environment when stepping out of the shower. The fan should be installed by an electrician. Pasadena homeowners can call The Electric Connection to have their new bath fan installed. Take a trip to your home improvement store and check out all of the options you have and then give us a call.

The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.