When you open the door to your home, you are instantly hit with a first impression—so are your visitors. If you are selling your home, that first impression starts outside, but walking through the front door is where you really have the chance to impress a potential buyer. Your home is your castle and you want it to look as nice as possible. It doesn’t have to be a mega mansion or a brand new home to be gorgeous. You can make your home look like a million dollars with some simple adjustments like paint, décor, flooring and lighting. One of the ways to really impress the second that front door is opened is with a chandelier in the foyer or entry way. This is something that can be handled by an electrician. Pasadena homeowners will be amazed at the difference an entryway chandelier changes the entire look of the home. At The Electric Connection, we can help you be proud of your home.

A chandelier gives a room a very elegant feel. Beautiful glass combined with light creates a beautiful sight. This is what you will see when you open that door every day. The chandelier can be accompanied with a dimmer switch installed by an electrician in Pasadena. It gives you the luxury of having full light on a dark night or just a little night light for when you get home after dark.

Chandeliers are not just for the entry way. They are beautiful pieces in a dining room or a sitting room as well. Their simple elegance is enough to be a main focal point in a room with very little other décor needed. You can choose to go big or go small. Your Pasadena electrician will take care of all of the installation for you, even if there isn’t an existing light in the room. Give The Electric Connection a call today and schedule your chandelier installation.

One studied alternating current (AC), and the other, direct current (DC). And yet, the world would not be where it is today without their contributions to science and electricity. In light of Nikola Tesla’s birthday on July 10, Mr. Electric is taking a look at the electric Tesla vs. Edison feud.

The main focus for Tesla was alternating current: an electric charge that periodically reverses its direction and is delivered to customers through a transformer. It travels at a much higher voltage than direct current and is more effective because of its ability to travel greater distances while maintaining a constant voltage.

Edison focused his research of electricity on direct current. A key difference between alternating current and direct current is that direct current only flows one way. The voltage of direct current is also constant but it is better when the electricity produced has to travel in short distances.

Edison was working on a system to generate direct current. When he could not get it to perform correctly he hired Tesla, an engineer and graduate of The Polytechnic Institute, who studied electromagnetism, promising him $100,000 if he could correct the problems Edison was having with his research and invention. Tesla corrected the problems but was not given the money. Tesla resigned and Edison spent the rest of his career trying to discredit Tesla’s research and work with electricity.

Today, nearly every home and business in the world is powered using Tesla’s alternating current. The ability of alternating current to travel over long distances and efficiently power everyday home and business electrical equipment eventually overtook Edison’s research on direct current. Edison did not lose out completely, as most battery-powered devices, fuel cells and light emitting diodes use direct current. As the push for alternative energy sources is on the rise, many manufacturers are looking at how batteries and electricity can change the way we look at fuel and the way goods are produced. Whether the electricity being used is AC or DC, Tesla helped us get where we are today.

Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!