Every summer, more and more homes experience outages in their electric systems. As a top Dallas Electrician, my electricians and I see the effects of these outages every day. They can be devastating, and cause a lot of damage.  In fact, the insurance industry pays out over $1 billion in damages annually in claims caused by outages and power surge damage. Most outages are caused by the weather, but there are different kinds of weather can cause an outage. This even includes weather that doesn’t produce lighting damage like the massive ice storms we saw during Super Bowl week this year that left hundreds of thousands without power (and, more importantly, without heat!) during one of the worst winter storms in years. Summer storms can produce devastating tornadoes that can knock out power for miles around the area they touch down in, and many hurricanes begin to build in the summer and early fall, causing catastrophic results even outside of the disaster zone. Hurricane Ike left over two million people without power when it hit southeast Texas in 2008, and not all of them were in the impact zone.

Not every outage comes from something as dramatic as a hurricane or tornado.  A lightning strike, even as far as half a mile away, can potentially cause damage to your delicate electrical equipment and appliances. Often, large-scale outages can occur when lightning strikes a transformer.

Outages don’t just occur because of bad weather:  many outages are caused by power equipment switching to accommodate the heavy load people put on the power grid.  Our power grid is already having trouble with its current load, and the problem only grows as more and more people use more and more electricity.  Summer in Dallas and Fort Worth is the perfect examples.  It’s when people are running their air conditioners constantly. This puts an incredible load on local and state power grids.  This leads to government agencies putting out warnings almost every summer about potential power outages, threatening brownouts and blackouts unless people conserve energy.

These outages aren’t damaging in themselves, but they leave open the possibility for electrical power surge damage.  You’ve probably noticed that when the power comes back on after an outage, it often flickers on and off quickly as the power grid attempts to get the electricity flowing back into your lines.  This stop-and-start action creates surges that can easily damage unprotected electronics or appliances.  Having a nice TV damaged like this is a very expensive hassle, and you can imagine how much more expensive and uncomfortable it could be if the surge takes out your air conditioner and refrigerator!

So, what can you do to keep power outages and power surges from affecting you?

Some of these options can even help you save money on your electric bill without the hassle of gas, fumes, or noise pollution.

Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

Ceiling fans are a welcome addition to any room, providing a source of light, circulation, and warm or cool air, at the flip of a switch. Depending on the type, and style of fan you choose, they can add a pleasing, visual element to your living space, but there’s more to choosing the right fan than just looks. Adequate sizing makes all the difference to performance and comfort, while proper installation methods allow for the safe and efficient operation of your ceiling fan. When it comes time to replace your existing fan, whether for technical, or aesthetic reasons, professional installation is recommended, as the warning signs and potential issues may not be immediately apparent.

Electricity is a modern marvel that most people don't really put much thought into -- unless it isn't working properly. You flip a switch, twist a knob or insert a plug into an outlet, and -- presto! -- the room is lit up, your television springs to life or your phone is charging. As wonderful as electricity is, it can also be dangerous. The following safety tips are ones that you should always keep in mind to stay safe from the inherent dangers of electricity. 

1. Spring for an inspection

While this tip is especially important for older homes, even newer homes could have faulty equipment inadvertently installed in them that could increase the potential for danger. That being said, if your home is older, chances are that it wasn't built to handle the increased reliance on electricity that is a given these days. An electrical inspection will pinpoint those potentially hazardous areas and advise you on how to address them. 

2. Buy a fire extinguisher

If your home catches fires due to an electrical issue, the only safe way to put it out is to use a fire extinguisher that is designed to retard chemical fires. If you attempt to put the fire out with water -- which might be your first instinct -- you will only make things worse. This is because water conducts electricity. Make sure that you keep fire extinguishers on every level of your home. Store them in a place that is easy to reach. Make sure to inspect them regularly and replace them as needed. Stay up to date on how to use it correctly. 

3. Get to know your outlets

A good, reliable microwave can be an important part of any modern kitchen. But is your microwave working a little too well? If you’ve got a microwave that just won’t quit, even when the timer goes off, you’ve certainly got a bit of a problem on your hands. But not a problem that our Electricians in Laurel can’t fix! Here are the most common causes for a microwave that won’t stop, and what you should do about it.

Looking for appliance wiring services in your area? Our electricians in Laurel are always ready to help! Contact Kolb Electric any time online and a member of our team will be more than happy to help!

There’s some good news to be had here, and some quite likely bad news. The good news is that no matter what folks say, you are not going to be radiated to death by your microwave. They’re generally quite safe, even if they’re running with the door open. However having said that, there are certainly risks, and the problem should not be left alone.

The bad news? The odds are pretty strong that you’re going to need a new microwave, or that replacing your microwave is going to be faster, easier, and safer.

So what causes this problem? There are actually very few causes, which lets us narrow things down pretty quickly. It tends to depend on how and why:

In our honest opinion, you either call in a professional, or you get a new microwave. The door switch is a fairly cost-effective repair if you’ve got a pro, but the panel issue is more complex. And while there are lots of “DIY” solutions out there, videos, mostly, we can’t really in good conscience suggest repairing a microwave on your own. Why? Because a microwave carries a potentially lethal charge, even when unplugged. It’s just not worth the risk!

Looking for a certified electrician to suss out your microwave woes? If so, you can always count on Kolb! Reach out to our team today and we can have one of our professionals on the way and ready to help in no time!