Losing power during a storm is always frustrating, particularly during storm season. But if you ask the best Frisco electrician how to prevent power outages, his answer is likely to be the same every time—during severe storm season, power outages are inevitable. However, you don’t have to go without power. Without an alternative power source, you’re likely to stay in the dark, but your best Frisco electrician can assure you that, with a generator, you never have to go completely without electricity.

Gas-Powered Generators — Are They the Answer?

While gas-powered generators have been the norm for some time, and they have proved to be a reliable means of keeping electricity on in the midst of a power outage, homeowners have found that owning one may not be without its problems. For instance, homeowners who live under a Homeowner’s Association (HOA) may find that there are restrictions prohibiting them from owning a gas-powered generator simply because the HOA may not allow generators to be placed outside of a home. This renders a gas-powered generator obsolete, since it can’t be placed inside your home due to the fumes. Those who live in apartments or condos face a similar challenge, as they may lack the outdoor space necessary for a gas-powered generator.

If you think this limits your options for power during an outage, however, don’t fret. Indoor generators may be just the ticket for you and your family to keep power on while the rest of the neighborhood’s electricity stays off.

Indoor Generators — An Eco-Friendly Solution

Indoor generators bring with them a myriad of benefits that go beyond keeping your lights on. Built specifically for indoor use, an indoor generator is a safe alternative power source that you can feel good about using.

Rechargeable. Indoor generators use batteries for power, so all you have to do is plug them into an existing power supply to charge. In the event of a power outage, power will stay on seamlessly as the unit picks up where the outage left off. In addition, some generators can be charged with wind and/or solar power, so you can charge your unit without being plugged into the grid. Fully charged, an indoor generator can keep you powered anywhere between 2 hours to seven days.

Gas-free. Because the generator is battery-powered, there are no fumes to worry about and no gas to burn off.

Custom-made and easy to store. Depending on the indoor generator you choose, they can be customized to fit the décor of your home, keeping your home looking neat while also making it simple for you to store your unit.

Simple to install and affordable. Indoor generators are more affordable than you might think, and they are easy to install, so you can have peace of mind right when you need it.

You don’t need to be the best Frisco electrician to recognize the benefits of an indoor generator.

If you're ready to take the plunge and purchase a state-of-the-art home theater system, you have more to consider than just the equipment you intend to purchase. Even if all of your components are top-of-the-line, you won't get the most bang for your buck without professional design and installation.

To make sure you get the home theater of your dreams, it's important to consult an electrician early on in the process. A quick electrical inspection of your desired theater space will help you understand what kinds of electrical upgrades you might need to set up a media center that is functional, safe and that provides the highest quality viewing experience.

Handle the Load

A big-screen TV by itself won't strain the electrical system in a modern home. But factor in a disc player, set top box, stereo receiver and multiple speakers, and you might be talking about a serious electrical load. A licensed electrician can easily test your system to ensure it's ready to power your dream theater. If upgrades are necessary, you can take confidence that new wiring or circuits will be installed by a qualified professional.

Hide the Cords

Wireless speakers and other multimedia components might seem like an attractive option because you want a streamlined look, but you'll often sacrifice a great deal of quality by cutting the cord. Instead, let an electrician make a plan for hiding all of your home theater's power cords away so that the room looks great and there's no risk of tripping in a darkened room. Without tearing up your decor, a professional installer can run cables within your walls and install new outlets to avoid that snarl of wires.

Protect Your Investment

You probably already use a surge protector to safeguard your home computer against the threat of power surges. But your home theater equipment is just as vulnerable, and a single lightning strike can turn thousands of dollars in equipment into trash. While you can protect your home entertainment technology using surge protection adapters, the best solution is to install a whole-home surge protection system. There's no need for clunky power strips, and your entire home's electronics and appliances will be safeguarded.

Unless you have extensive electrical experience, don't go it alone when setting up your home theater. Make sure your design is smart, safe and spectacular by enlisting the talents of a licensed local electrician.

The Christmas carols are already playing nonstop in shopping malls and on the radio. Before you know it, Christmas day will arrive. Whether that means flying off to visit far-flung friends and relatives, or inviting the extended family into your own home, follow these tips to have a meaningful, and safe, holiday season.

Your Christmas Tree 

The tree is the monument around which many families' Christmas celebrations revolve. But beware-- every year an average of 210 homes experience fires caused by their tree, according to the National Fire Protection Association.

To avoid becoming an unhappy statistic, look for a tree with fresh needles that isn't dried out, and place it in an area clear of any heat sources. Use LED light strands, which produce very little heat, and never hang actual candles from the tree. Dispose of it after Christmas once it starts getting dry and the needles are falling off. If you use an artificial tree, make sure it is labeled “fire resistant.” 

You also want to ensure the tree is set up securely. At best, a fallen Christmas tree is a shame, and at worst it could cause a hazard, possibly knocking over other items and leaving broken glass, frayed wires, spilled water in its wake.

Don't forget about wire safety. Make sure that none of the cords to your lights are frayed and the plugs are in good working order. Try to avoid an extension cord, but if one is necessary inspect it as well, and ensure it doesn't present a tripping hazard in your house. Finally, don't overload a single outlet with too many lights or you can risk tripping the circuit or even  creating a fire hazard. 

Candles

Candles are an important part of many family holiday decorations, and not just for Christmas. The menorah is a centerpiece of the eight-day Hanukkah celebration, with a new candle lit each day. And people who observe Kwanza light candles to commemorate seven principles of African heritage. Whatever religious or secular tradition you follow, candles bring warmth and light to stave off the darkness of winter. 

While the candles are beautiful and significant, their open flame can also be dangerous to people, pets and your home. For safety, lit candles should never be left unattended, and never placed in an area where a child or pet could get burned or knock them over. Also make sure they aren't near any flammable material like curtains.

If you want to make a semi-permanent window scene for the holiday, it's better to get an electric menorah or other display, and save the real candles for a supervised  and temporary ceremony. 

In the Kitchen

The same precautions that apply to candles also apply to gas stoves and their open flames. Take care that guests don’t bump into the stove or hot pots and pans. Also, some cultures call for fried foods, such as the Hanukkah tradition of frying potato latkes and jelly doughnuts. Enjoy the delicious meals but be careful not to splash cooking oil around the kitchen, which is another fire hazard.

Your Outdoor Display 

It's fun to turn your yard into a scene from the North Pole. Just make sure that any lights and other equipment is rated for outdoor use and won't short out in a snow or rainstorm. As with indoor lights, inspect the cords for any damage and discard those that aren't in top shape. If you need an extension cord, make sure it's rated for the outdoors as well, and don't let it run through puddles or across walkways.

With just minor precautions, you can ensure a safe holiday season focused on family and tradition.

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

If you’re considering the purchase of an electric car, good for you! You're doing your part to reduce the nation's reliance on oil and cut down on fossil fuel emissions, and you get to drive around in style to boot. But with many newer models, you’ll need to set up a charging station in your own home garage. Public charging stations are not widely available, and nothing beats the convenience of having a power source right outside your door. With an electrician's help, you can install a charging station on your property and get your car up to speed quickly. Read on for some tips on how to get started.

Expand Your Range

New, affordable electric cars (those that cost around $30,000) top out at ranges between 60 and 90 miles before they need to be recharged. That doesn't do you much good for a cross-country road trip, but it should be more than enough for the average daily commute. If you can plug it in overnight, you should be good to go the next day.

Technically speaking, the charger for an electric vehicle is found in the car itself, and the box you install to provide the electricity is called the Electric Vehicle Service Equipment (EVSE). The EVSE puts out 240-volt alternating current, and the charger in the car converts it to direct current to replenish the battery. Note that you can plug into a standard 110 volt outlet for some cars, but it will take 18 hours or more to fully charge them, making it impractical for daily use.

Pick Your Charging Spot

An EVSE can cost anywhere from $500 to $1000 or more, depending on what model you need, plus installation fees. More expensive models have higher amp ratings and can charge the car faster, generally speaking – some can get you ready to go in as little as three hours. The box needs to be placed within 15-25 feet of where you park your car so you can reach it with the charging cable.

Before you start the installation process, have an electrician evaluate the state of your wiring and circuit box – some older homes may not be able to handle charging a car without a significant electrical system upgrade. If everything checks out, the electrician can hardwire the EVSE or, alternatively, install a 240 volt outlet, similar to what you use for an electric oven or clothes dryer. The second option gives you more flexibility to move your charging station in the future, although outdoor installations usually require hardwiring.

The Code of an Electrician

To read up on the specific rules about how the EVSE needs to be installed, check out National Electrical Code Article 625 – your local building code likely has the same or similar regulations. For more help evaluating the suitability of your home for an electric car charging station, contact a local electrician today.