If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.

A variety of ways exist to quickly and efficiently complete an electrical installation. One method involves using pre-made and pre-fabricated conduits, cables, panels, and devices. Pre-fab strategies cut down on repetitive labor costs and scrap material waste.

Furthermore, pre-fabricated components are assembled in quality-controlled factories by highly trained technicians. This ensures that every device and termination is in working order and properly connected. These technicians work faster and cost less per hour than a journeyman electrician, therefore saving the contractor time and money.

Another option to increase efficiency involves using pre-wired devices. They can be used for repetitive tasks like receptacles, switches, light fixtures, data ports, or fire alarms. They save time by eliminating the need to terminate each device individually. Instead, boxes are made to order and ready to install. The desired length of cable is attached and ready to run to the nearest junction point. Simply attach the box, route the cable, and connect to the supply wires. Most suppliers prepare a custom quote, further reducing time spent by the foreman planning and ordering parts individually.

Pre-wired panels are possibly the simplest way to save money, as they require no special tools. Wiring up a panel at the shop before heading to the job site allows you to function test it before installation. This ensures proper functionality. In addition, it keeps the interior of the panel away from weather and other possible sources of job-site damage. For larger or more complex panels, suppliers can be arranged and have the work performed by specialized technicians. Panels can even be ordered with pre-cut and pre-terminated lengths of cable or cord.

Most electricians have used pre-formed conduit, especially PVC which requires specialized tools to bend. However, entire runs of pipe can be custom ordered and pre-shaped. Especially useful in underground conduit networks or when complicated bends are required, these pre-made conduits drop in place and fit perfectly to the engineer’s prints. They also ensure that conduits are not damaged or kinked during the bending process and that no sharp edges or rough spots are left to damage wires or cables.

If the project demands it, entire buildings can be pre-made and pre-wired in a factory setting by trained technicians who specialize in quickly and efficiently preparing custom ordered buildings. Especially useful in industrial settings, these buildings come complete with all interior and exterior lights, switches, receptacles, and control wiring.

Often, motor control centers (MCCs) for large industrial installations are constructed this way. Therefore, on-site electricians are free to begin immediately running cables to motors and devices, with simple termination points inside a completed building. In addition to using fewer electrician hours, they also reduce required hours from other tradespeople such as welders or cladding installers.

Finally, pre-fab strategies are a great solution for reducing material waste, worker hours, and downtime while making deadlines a snap. Projects run smoother with fewer errors.

Businesses as we all know, are always thinking about the bottom line. From ways to increase revenues to ways to decrease expenses, it’s all critical stuff for any company to pay attention to.

That’s exactly why we are creating this post on energy saving tips for businesses and companies alike. And while not every business in every building will be able to implement every single tip on this list, there should be numerous ones that will be highly relevant to your business.

Saving energy will allow you to reduce overhead expenses, enhance your public view as a “going green” company (which you could use as a marketing play), or even just have better piece of mind knowing your buildings are just that much greener.

Without further ado, here is the first on the list (out of 25)…

1. Upgrade to a LED lighting system. The benefits of LED technology far surpass any other lighting technology commonly used in buildings or fluorescent, metal halide, HPS, etc). reducing the amount of energy that is going to power those lights as well.

4. Install sky lights. How about all of that natural light that is going to waste otherwise? By installing sky lights in areas where natural lighting would otherwise not get to (e.g hallways and inner rooms), you open yourself up to some huge savings by not having to have nearly as many lights on during the daytime.

5. Switch to green web hosting. This is a huge one for those companies who have lots of traffic and do a lot of business through their website. spam email has a carbon footprint? Although this won’t save your company any money, it will definitely reduce the carbon footprint associated with your company.

14. Only purchase ENERGY STAR equipment. By purchasing office equipment that is ENERGY STAR qualified, you are buying into products that are proven to be more energy efficient than those that aren’t.

15. Switch over to laptops. Desktops are always plugged in, and that can mean a lot of energy consumption. By switching to laptops, you will use 1/4th the energy associated with powering your computers.

16. Update your insulation. Those nasty drafts aren’t only uncomfortable to your employees and / or visitors, but they are also wasting a lot of energy. If you can, consider updating your insulation to stop the escape of that warm (or cold) air you are paying to output.

17. Update your windows. While you are at it, updating your windows to ones that don’t have any leaks in them will stop those drafts too. Both of these go hand in hand, and together will reduce a lot of temperature control going to waste.

18. Hold a virtual meeting. If you have days designated for meetings and not much else, then why power your entire building (and make everyone drive) if you could easily have everyone stay at home? Your employees will probably appreciate it, and you are going to save a lot of energy for that day. Technology these days makes it a whole lot easier to save on energy for business and buildings alike.

19. Take advantage of tax credits. All of this effort on saving energy will not only save you in overhead costs, but it could also phantom load is basically energy that is being consumed through a product that is entirely off. The simple solution is to unplug everything when it is not in use. Alternatively, you could shut off the power to an entire room or area when it’s not in use to ensure no phantom load waste is occurring.

23. Reduce hot water usage. By installing efficient faucets, you will reduce the amount of water that is wasted. And if you do heat that water, reducing the waste of it will reduce the amount of energy you use to heat that water.

This is not the time of year to be dealing with electrical problems in the home. It can be a huge issue to have an outlet fail or a breaker constantly trip when you are trying to deck your halls. The problem can be a number of different things, but you won’t know for sure until you have an electrician in Santa Monica come out to take a look. It is always better to be safe than sorry when it comes to any kind of electrical concerns. The team at The Electric Connection is ready to help you discover what the problem is and get it taken care of before it becomes a serious safety hazard.

If you are not a trained electrician, you are going to have to guess what the problem is. That is a risk you don’t want to take. What if that outlet that only works on occasion is actually not just a fluke and is the sign of a much bigger problem. It is a good idea to have a Santa Monica electrician inspect your home. During the inspection, the outlet will be tested and the cover removed to check for any loose wires. While it may be an easy fix, ignoring those loose wires could create a tiny spark that ignites the insulation packed around the outlet.

You are not expected to know all of the hazards or to know why your breaker is tripping. That is a job for an electrician. Santa Monica residents will feel better knowing their house has been given an electrical checkup. Problems will be identified and you will be given the option to take care of right away or wait until it is a little more convenient. Your electrician will let you know just how serious the problem is or whether it is something relatively minor. If you are concerned about an electrical problem in your home, give The Electric Connection a call and let one of their experienced electricians diagnose the problem for you.

ballast-compatible LED T8 tube for office lighting, school lighting, hospital lighting, basement lighting, and more. The energy-efficient F32T8 tube light can be used in direct-wire fixtures or to replace T8 tubes in fluorescent fixtures without removing ballasts. Designed to last 50,000 hours—5 times longer than fluorescent tubes—the LED T8 tube reduces costly repairs, disposal fees, and the need for replacements. This energy-efficient LED light uses just 18 watts of power and is comparable to a 32-watt fluorescent tube light.