If you’re looking for something that will yield a good ROI for your home, then why not schedule an electrical safety inspection in Fairfax, VA?

Why Investing in an Electrical Safety Inspection in Fairfax, VA Is Wise

When the subject of investing in your home comes up, a lot of people think about living room makeovers, installing a hot tub, or upgrading to a smart kitchen. However, what too many homeowners overlook is a relatively small investment that can both help keep you and your family safe while simultaneously increasing the value of your home.

Interesting, right?

The investment we’re referring to is an electrical safety inspection. This is a careful, methodical, and comprehensive inspection of your home’s complete electrical system by our Master Electricians. It includes:

Once the entire electrical system has been inspected, we prepare a report for you with our findings. This can include things that need to be upgraded or repaired, as well as recommendations for increasing the capacity of your system to meet the demands of a modern lifestyle.

Of course, you’re probably wondering why all of this is so important? There are a number of reasons:

We can always find ways to save a few extra dollars, but sometimes it can be little difficult to pinpoint exactly where those savings are to be had. You may look at the budget over and over and still keep coming up with the same bottom line. An electrician in Santa Monica can help you discover a few ways you could cut your electric bill without dramatically changing your lifestyle. If you ever have any questions or concerns about these tips, you can call The Electric Connection to ask more questions.

1-Get rid of any of those remaining incandescent light bulbs. They are costing you money. You can shave 20 percent off your electric bill simply by relying on CFL and LED bulbs that are much more energy efficient. They tend to be a bit brighter as well.

2-Have a ceiling fan installed in a central room of your house. This will help circulate hot and cold air produced by your furnace or air conditioner. Ceiling fans run on a fraction of the electricity of a heating or air conditioning unit. It is a good idea to have the fan installed by someone familiar with Santa Monica electrical codes.

3-Ask every member of the household to shave off 2 minutes from their average shower time. This can save a lot of money on your electric bill by reducing the demand put on the hot water heater. You could also turn down the thermostat of the water heater by about 5 to 10 degrees and save even more money.

4-Unplug any appliances, computers and electronics when they are not in use. When you leave for the day or go to bed at night, unplugging your electronics can save you money on wasted phantom power.

Give The Electric Connection a call today to have your ceiling fan installed or to learn more about energy savings.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs:

This is the second year the United States is focusing its efforts to really bring energy conservation to the forefront of conversation. We have all heard about fossil fuels being depleted and the demand each house puts on the power grid. We are constantly told we have to be more frugal with electricity. It is for the benefit of the world as well as our bank accounts. Saving energy will ultimately save money on the electric bill and make each one of our carbon footprints just a little bit smaller. Your Burbank electrician and the team at The Electric Connection wants you to know about Energy Action Month, which is this October.

Right now, the government in the United States is taking action to reduce their own energy consumption. It starts at the top and by their good influence, hopefully citizens will follow suit. An electrician in Burbank has some ways that will help you take action this October and develop new habits that will ultimately lead to less energy usage, lower electric bills and a smaller demand on today’s power sources.

Things to do right now include;

*Turn up the AC a couple degrees or turn up the heater a couple of degrees *Switch out those old bulbs with LEDs (this may require a different light fixture)

Things to Schedule

*Get a ceiling fan installed by an electrician, Burbank homeowners can really save money on their heating and cooling costs with this one device

*Schedule an energy audit to get an idea where you use the most electricity and how you can cut back

These are 4 easy, actionable steps that will help you save money and do something great for the environment. Give The Electric Connection a call if you need a new light fixture or ceiling fan installed.