About 80% of dwellings were built before the year 1990. While they may have complied with the safety standards at the time of construction, those standards might not be relevant in today’s day and age. Significant changes were made in electrical standards since 1990 and the protection technologies of today were not available or required back then. You must ensure that the standards maintained in such existing accommodations are raised to the electrical safety levels of the current standards.

Understanding the Risks at Existing Accommodation

Extensive safety studies must be carried out in the existing residential buildings to determine the disparity between the required safety standards and the existing safety standards. If the existing standards fall a little short, you must show an urgency to raise the level of safety of these buildings and bring them up to the current standards.

Thankfully, it isn’t too complicated or difficult to do so. You can take small steps to gradually improve the electrical safety through a program of manual safety audits.

3 Ways Current Safety Standards Help in Reducing Electrical Risks

Importance of Verification

The current electrical standards ensure that the new residential electrical installations are safe and that they remain so over their entire lifetime. IEC 60364-6 defines both initial verification of an installation as well as verification of residential dwellings every 10 years. The periodic verification ensures that the fundamental protective measures remain active and reliable.

Recommended Periodic Auditing

There must be periodic auditing to ensure that the safety conditions are up to the mark. The audits need to be simple and based on visual checks. They need to be performed by a qualified auditor, who can then inform the owner of any possible safety issues. The owner will then take responsibility for arranging any necessary repair work. The frequency of inspection can be defined by each country, either by a specific period (e.g., 10 years), or triggered by an event such as the sale or rental of a dwelling.

Electrical challenges and solutions are often part of residential, industrial and commercial installations. These vary depending on the amount of power involved, the location, the risk it poses to users, and other factors.

Most of the electrical faults pose various risks which range from electric shocks, fires, and loss of property or lives. While the user may avoid using the sections of the installation or equipment that is faulty, it is always advisable to call a qualified electrician to sort out the problem as soon as possible.

This problem is similar to the heating appliance issue we started with.  Overloaded outlets are more than just a circuit-tripping annoyance, they can also become a danger quickly!  If you’re electrical panel is doing its job properly, the circuit breaker will trip before there’s a problem, but relying on a safety measure is not a safe practice.

Overloaded outlets are simply circuits that have too many things plugged into them.  This can happen by:

All of these practices can overload your outlets by putting too much demand on the circuit.  In a best case scenario, the circuit breaker trips.  The worst case leads to excess heat at the outlet, melting plugs and sockets or excess heat on the circuit which melts insulation from wiring in the walls, leading to a house fire.

Of course, even if you follow all of these protections, things can happen that are outside of your control.  That’s when your best defense is a strong safety net.  Early detection and warning for house fires is the best way to survive in an emergency.  The sooner you’re aware that there is a fire, the higher your likelihood of survival.  For the best defense:

I mean, this is crazy, right?! You can almost FEEL the presence of these weird light dudes as they approach you at a murderously slow pace. Are they astronauts on our own planet? Is this our planet? I was unable to locate a larger version of this photograph, but I still put it at the top because it is incredibly evocative. And that’s not even the real kicker. If you’ve read my other posts on light painting, you know that incredibly long exposure times are necessary for shots like this. So homegirl or homeboy was out in the snow, in the dark, making this thing. And she/he had the wherewithal, tromping through the icy powder, to render these human forms so very well, even making one look like he’s trudging knee-deep. So weirdly inhuman. So weirdly human. I love this photo.

2. Give Up the Ghost

I would never give you a photo of old shoes to look at unless there were something special going on in the picture. In this one, there’s a simple, appropriate message. Ready for it? LIGHT ENHANCES THINGS. Duh, right? This photo is aesthetically interesting, but more valuable to me is the way it shows the essential point of light painting: To have fun! To breathe some excitement into your photography. If your only subject is an old pair of Tims, don’t complain. Turn off the lights and bust out a “paintbrush.”

7. There Are ALMOST No Words for This

Isn’t this great? What I love most is how nonchalant and, well, normal the guy looks in this photo. See? It’s all about juxtaposition. Angel wings mixed with a loud sense of everydayness (he COULD be wearing white robes) make you take notice of the unspoken contradiction. You ask, Why this? And you are led to wonder if maybe this is saying something about how sometimes the people who are the most inconspicuous are the most angelic. See what I did there? That’s why I have chosen these photos from among the hundreds that are out there. They invite wonder and have the power to lead to new insights. I am a dork.

9. Do Not Anger Him/Her/It

* Note: I found these photos on Pinterest and was unable to confirm all of their original sources. So, if you have any information about the original sources for any of these photos, please let us know in the comments sections. We want to give credit for these fantastic light painting photos where it is very much due! Thanks!